Hamburg-Altstadt | Ev.-luth. Hauptkirche St. Katharinen | Präsentation von Kirche und Geläut

Поділитися
Вставка
  • Опубліковано 17 вер 2024

КОМЕНТАРІ • 33

  • @julianstillger8094
    @julianstillger8094 2 роки тому +6

    Ich wünsche der Soli Deo Gloria-Glocke viel Glück, 🍀 und hoffe, dass sie bald wieder läuten kann.

  • @kerkklokkenfrl3214
    @kerkklokkenfrl3214 2 роки тому +6

    I love this bells from hamburg

  • @100samref
    @100samref Рік тому +4

    sehr schön! Bei "uns" ;) heißt die Zusammenstellung "SALVE" nach dem Salve-Regina-Anfang

    • @glockendoku
      @glockendoku  Рік тому +1

      Danke sehr!
      In der katholischen Kirche wird dieses Motiv auch Salve Regina genannt.

  • @Segensglocke
    @Segensglocke 2 роки тому +3

    Tolles Video Mano!
    Danke dir! :)

  • @Snomon962
    @Snomon962 2 роки тому +3

    eine schöne präsentation! echt schade um die große..

  • @nurnbergerglockenfreund
    @nurnbergerglockenfreund 2 роки тому +3

    Sehr schön! Kann mich gut dran erinnern als wir mitte Januar dort oben waren. War ein schönes Erlebnis nur wirkte Schade mit der historischen großen Glocke. Ich finde nur den Winkel der Glocke 3 beim Läuten recht niedrig die war von außen damals beim Vorläuten relativ schwach zu vernehmen.

    • @glockendoku
      @glockendoku  2 роки тому +2

      Danke! Ja ich war da auch schon ein paar Mal oben. Schade um die große Glocke. Es ist ja die größte erhaltene Glocke des Gießers. Naja falls sie erneut geschweißt wird, wird man sehen, wie gut sie danach klingt. Und im Zuge der Turmsanierung soll ja auch das Geläut saniert werden. Spätestens da wird die Glocke 3 hoffentlich wieder einen angemessen Läutewinkel haben.

  • @glockendoku
    @glockendoku  2 роки тому

    Ich bedanke mich für 100 Abonnenten!

  • @piotrmigowskidzwony9814
    @piotrmigowskidzwony9814 2 роки тому +3

    Beautiful bells! Why didn't the biggest bell ring?

    • @glockendoku
      @glockendoku  2 роки тому +2

      The big bell was welded because it had a crack. If it kept ringing, it would break. That’s why it doesn’t ring anymore.

    • @piotrmigowskidzwony9814
      @piotrmigowskidzwony9814 2 роки тому +2

      ​@@glockendokuIs it going to be repaired?

    • @glockendoku
      @glockendoku  2 роки тому +1

      @@piotrmigowskidzwony9814 It’s possible, but it’s also possible that she’s being transported out of the tower and a new big bell is going to be cast.

    • @janmarichel2811
      @janmarichel2811 2 роки тому +1

      Its a pity and good luck with a new bell.

  • @uhren_und_technik302
    @uhren_und_technik302 Рік тому +1

    Ist das Uhrwerk heute noch in Betrieb? Ist eine Turmuhr von Korfhage ❤

    • @glockendoku
      @glockendoku  Рік тому

      Ja, das mechanische Uhrwerk ist immer noch in Betrieb.

  • @lucarichard5899
    @lucarichard5899 2 роки тому +2

    Was mit der f0 passiert weiß man nicht? Aber eine schöne Präsentation vom Teilgeläut (Plenum).

    • @glockendoku
      @glockendoku  2 роки тому +1

      Danke sehr! Was mit der Soli Deo Gloria passiert, ist völlig offen. Sie könnte erneut geschweißt werden, sie könnte jedoch auch, wie die Glocke von 1454, in der Turmhalle ausgestellt werden und würde dementsprechend nicht mehr läuten.

  • @joshuaillgner3231
    @joshuaillgner3231 Рік тому +1

    Kannst du das geläut auch bei scartch machen

  • @AllieThePrettyGator
    @AllieThePrettyGator Рік тому +1

    Why did the bourdon not ring

  • @IceTasty
    @IceTasty 2 роки тому +2

    Wow!
    Was ist mit der Soli deo gloria passiert?

    • @glockendoku
      @glockendoku  2 роки тому +1

      Steht in der Videobeschreibung

    • @IceTasty
      @IceTasty 2 роки тому +1

      @@glockendoku danke!

  • @joshuaillgner3231
    @joshuaillgner3231 2 роки тому +1

    Kannst du das auch bei scertch machen danke

    • @glockendoku
      @glockendoku  2 роки тому +1

      Kenne mich da leider nicht mit aus :(

  • @kerkklokkenfrl3214
    @kerkklokkenfrl3214 2 роки тому +1

    Why not volgelui

    • @glockendoku
      @glockendoku  2 роки тому +3

      Because the biggest bell could brake

    • @kerkklokkenfrl3214
      @kerkklokkenfrl3214 2 роки тому +1

      @@glockendoku i hope it will ring again soon

    • @MimicoBungalow
      @MimicoBungalow Рік тому +1

      does the biggest bell have a crack in it or is it the ringing mechanism that needs repair?

    • @glockendoku
      @glockendoku  Рік тому

      ​@@MimicoBungalow The big bell had a crack and was therefore welded. If it kept ringing, the weld could burst again.