I just purchased my DWC2440 and have found you to be the most helpful when it comes to watching YT university for learning. Thanks for putting out some of the best content. CK
Thank you! I've cut a few of the files I've gone through - most recently a 3D carve a few weeks back. As I get the right project and materials together, I'll be doing a lot more of this. Thanks again!
Thank you very much! I really had to dig deep for it. I couldn't remember where I had downloaded that file from. Luckily, they still had that page active.
Mark, great instructional video. I have learned so much from this as well as answering so many questions that I had on the Vectric software and it's use. I have also watched your Gatton CNC build, which I watched numerous times (as well as Dave's) when I was building my Gatton. Thanks for taking the time to explain the software in an easy to understand format.
@@MarkLindsayCNC Yesterday the tiling function.. This morning Square corners in the Toolpath dialog. Previously there have been others that I do not remember. I have been looking for a reason to upgrade...
Two newbie questions - why a downcut and not a compression bit for the Amana Spektra bit? I’ve used their 3/8 compression bit on Baltic birch phenolic plywood and it was flawless on both sides... is downcut better for solid woods? Second question- why use tabs AND the CA glue/tape together? I’ve just been using the glue/tape and nothing moved at all - but I was covering the whole surface of the piece with tape and using probably too much glue. Thanks for being a GREAT resource to those of us just starting out!
Thank you Lawrence. Easy question first: I didn't use a compression bit because I don't have one. I used the downcut bit because between the downcut and upcut bits I DO have, I know the downcut bit will give me the best top finish. Second, I used tabs and the tape and CA glue method because I hadn't decided on which way I was going to mount the material when I saved g-code. True, when I decided to use the tape and CA glue, the tabs became unnecessary. I do that on occasion. It adds a little bit more sanding to remove the tabs, but that's no problem. Better to have them and not need them than need them and not have them, you know?
@@MarkLindsayCNC Makes sense! I was a little apprehensive using just the tape/glue method, but am pleased with the outcome of my first projects. Now that my machine is dialed in (Laguna had to replace the controller and the new one had all factory defaults for table size, pulse equivalency numbers, ATC tool locations and so on - and now I know how to program those...), my adult kids are asking for things to be cut - how fun! One asked me to do something with his 5 yr old's T-Ball team logo. Have you done a video on bringing in jpgs and making vectors out of them? I have Photoshop, Illustrator and Aspire... Thanks again!!!
Yes sir I did. Here's a link to the playlist of this entire series. Parts 14 and 15 are about bitmap tracing. They should get you going. ua-cam.com/play/PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p.html
CA stands for Cyanoacrylate - it's basically super glue. I use 2P10 CA glue and Activator spray, and here are affiliate links to both of them. 2P10 Medium Thickness CA Glue: amzn.to/3atUOzi Activator Spray: amzn.to/3oTP2iM
An EXCELLENT video. You have, what we call, a RADIO voice Mark. Only question I have-- seems to never show up-- is how long did it take to cut? We all like to use the fast speed on our videos but it would be nice to know the total cut time. Thanks!
Thank you, Jay. I've addressed this at various times, but basically I can't give you an estimate on cut times, as there are too many variables. I don't know your machine's capabilities, rigidity, your spindle/router HP, the type of material you're cutting, etc... There are a lot of things that effect cut times that can't be anticipated. You can get an estimate by clicking the Toolpath Summary icon, which is right next to the Preview Toolpath icon in the Toolpath tab.
Hello! I am interested in how I can use the projects edited with Aspire 8.0 or 9.514 if I have downloaded a newer version (10 or 11). It tells me that I have to open it only with the version with which it was originally edited. Thank you
I have never used the tape and glue method. I do like the concept but I noticed that you are mounting your work directly to the machine bed. Doesn't that cut into the bed and require frequent replacement / repair?
It does require resurfacing the spoilboard on occasion, but not a replacement. I'm still using the original spoilboard I put on the table 18 months ago, and I've resurfaced it once. I'm about due to surface it again, but it's not a high priority right now. Just FYI - the tape and CA glue method can be used whether you set Z zero to the machine bed or the material surface. That part really makes no difference.
Mark, was it necessary to recalculate each file individually? Could you have used recalculate all? Regardless, another very good video. Happy Sunday!!!!!
Thank you, Steve. Yes, it's absolutely necessary to recalculate each toolpath individually. That's the whole point of the video. You need to go through each toolpath individually and make sure the bits, the cutting parameters (like depth of cut, stepover, etc...) the feeds and speeds, and such match your tools and machine. For instance, if you got the file from someone whose machine can cut 1 inch maple at 300 ipm in one pass, and your machine can't, you risk breaking tools and damaging your machine if you don't get in and change that. The only way to be sure is to go through each toolpath individually. If you just click Recalculate All, you really have no idea what the setup for each toolpath is, unless you go through them one by one. Since you have to do that anyway, it makes no sense to Recalculate All to begin with.
The reason is simple - operator error. Actually, I wasn't sure how I wanted to mount the piece of material to the table, so I went ahead and left the tabs, just in case I clamped or screwed it down. When I got the material picked out, it turned out that I didn't need them. Rather than go back and eliminate the tabs, I just ran it as is. I probably should have mentioned that in the final edit, but it really slipped my mind.
@@MarkLindsayCNC I forgot to mention: Thanks for the tip on on using the MultiMax for cutting tabs! Do you have the small sanding attachment? I love it for sanding larger pockets
You are so explicit in your instructions love it.
Great tutorial Mark. Thank you so much. I have been watching and learning from you.
God Bless
Great work Mark!!
Thank you, Eloy! I'm having fun with it!
I just purchased my DWC2440 and have found you to be the most helpful when it comes to watching YT university for learning. Thanks for putting out some of the best content. CK
I can always count on your videos to teach me something new...or remind me of something old. Can't wait to see how you finish it.
Thank you, David! I do appreciate it!
Always learn new things watching you video’s. Thank you.
Thank you, Rick. I do appreciate it.
Nice to see you go thru the files as usual but then you actually went out and made it! nice work - please do more show and tell!
Thank you! I've cut a few of the files I've gone through - most recently a 3D carve a few weeks back. As I get the right project and materials together, I'll be doing a lot more of this. Thanks again!
Another fantastic project. Thank you for sharing it with us.
Another excellent training video. THANKS for sharing. Cannot wait to see the finishing video as well.
Thank you, Mark!
Great video Mark. I'm looking forward to see how you finish that project. Those Amana bits are awesome for sure. Thanks for the mention.
Thanks very much, Dave. I love that bit. I only regret not getting some sooner.
Another great video! Thanks!
Thank you, Keith!
Good one Mark
Thank you, Steve!
Another great video and a interesting discovering page of Vectric Labs Blog. Thanks you again
Thank you very much! I really had to dig deep for it. I couldn't remember where I had downloaded that file from. Luckily, they still had that page active.
Awesome video as always Mark. I'm gonna have to try this one. Thank you and I can't wait to see the finished sign
Thank you, Chad! It's a great project. I'm working on the finish as we speak.
Mark I had to cut it today lol I cut mine on a cedar and just spray painted it black and sanded
Enjoyed the video thanks for taking the time to share Mark you have a blessed day
Thank you very much, Tim!
Mark, great instructional video. I have learned so much from this as well as answering so many questions that I had on the Vectric software and it's use. I have also watched your Gatton CNC build, which I watched numerous times (as well as Dave's) when I was building my Gatton. Thanks for taking the time to explain the software in an easy to understand format.
Thank you, Tony. I do appreciate it.
Great, easy to understand video. New subscriber!!
Thank you and welcome aboard!
Thanks for coming to my live stream tonight. It was great to see you in the chat. I hope you had a great time. Come back next week for more fun! xoxo
Thank you Miss Brenda! I have a lot of fun watching your live stream. Keep it up!
always good info.
thank for the info..nice job.. i will try this..
Well Mark,
You made me do it. You demonstrated a function that I do not have in Desktop..Upgrading to Pro!!!!!
What did I demonstrate that isn't available in Desktop? I really want to know.
Thanks for watching, Skip!
@@MarkLindsayCNC Yesterday the tiling function.. This morning Square corners in the Toolpath dialog. Previously there have been others that I do not remember. I have been looking for a reason to upgrade...
Well then, glad to be of service - lol
Great Video, Iv'e learned a lot from you how to use VCarve.
Thank you John! I'm happy to hear these videos are useful to you. I really appreciate that.
Two newbie questions - why a downcut and not a compression bit for the Amana Spektra bit? I’ve used their 3/8 compression bit on Baltic birch phenolic plywood and it was flawless on both sides... is downcut better for solid woods? Second question- why use tabs AND the CA glue/tape together? I’ve just been using the glue/tape and nothing moved at all - but I was covering the whole surface of the piece with tape and using probably too much glue. Thanks for being a GREAT resource to those of us just starting out!
Thank you Lawrence. Easy question first: I didn't use a compression bit because I don't have one. I used the downcut bit because between the downcut and upcut bits I DO have, I know the downcut bit will give me the best top finish.
Second, I used tabs and the tape and CA glue method because I hadn't decided on which way I was going to mount the material when I saved g-code. True, when I decided to use the tape and CA glue, the tabs became unnecessary. I do that on occasion. It adds a little bit more sanding to remove the tabs, but that's no problem. Better to have them and not need them than need them and not have them, you know?
@@MarkLindsayCNC Makes sense! I was a little apprehensive using just the tape/glue method, but am pleased with the outcome of my first projects. Now that my machine is dialed in (Laguna had to replace the controller and the new one had all factory defaults for table size, pulse equivalency numbers, ATC tool locations and so on - and now I know how to program those...), my adult kids are asking for things to be cut - how fun! One asked me to do something with his 5 yr old's T-Ball team logo. Have you done a video on bringing in jpgs and making vectors out of them? I have Photoshop, Illustrator and Aspire... Thanks again!!!
Yes sir I did. Here's a link to the playlist of this entire series. Parts 14 and 15 are about bitmap tracing. They should get you going. ua-cam.com/play/PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p.html
Mark great video and I like your mounting method, But what is this CA glue - I really want to try this. Jayme
CA stands for Cyanoacrylate - it's basically super glue. I use 2P10 CA glue and Activator spray, and here are affiliate links to both of them.
2P10 Medium Thickness CA Glue: amzn.to/3atUOzi
Activator Spray: amzn.to/3oTP2iM
@@MarkLindsayCNC ah ok thank you, Jayme
An EXCELLENT video. You have, what we call, a RADIO voice Mark. Only question I have-- seems to never show up-- is how long did it take to cut? We all like to use the fast speed on our videos but it would be nice to know the total cut time. Thanks!
Thank you, Jay. I've addressed this at various times, but basically I can't give you an estimate on cut times, as there are too many variables. I don't know your machine's capabilities, rigidity, your spindle/router HP, the type of material you're cutting, etc... There are a lot of things that effect cut times that can't be anticipated. You can get an estimate by clicking the Toolpath Summary icon, which is right next to the Preview Toolpath icon in the Toolpath tab.
Great thanks
Hello! I am interested in how I can use the projects edited with Aspire 8.0 or 9.514 if I have downloaded a newer version (10 or 11). It tells me that I have to open it only with the version with which it was originally edited. Thank you
Mark Have a question . how would you have set the cut depth of the .25 end mil to do the cut out if you had your machine bed to set the Z height.
Jeff
Thanks for watching, Jeff. I would have just entered the material thickness, and not told it to cut deeper.
I have never used the tape and glue method. I do like the concept but I noticed that you are mounting your work directly to the machine bed. Doesn't that cut into the bed and require frequent replacement / repair?
It does require resurfacing the spoilboard on occasion, but not a replacement. I'm still using the original spoilboard I put on the table 18 months ago, and I've resurfaced it once. I'm about due to surface it again, but it's not a high priority right now. Just FYI - the tape and CA glue method can be used whether you set Z zero to the machine bed or the material surface. That part really makes no difference.
Mark, was it necessary to recalculate each file individually? Could you have used recalculate all?
Regardless, another very good video. Happy Sunday!!!!!
Thank you, Steve. Yes, it's absolutely necessary to recalculate each toolpath individually. That's the whole point of the video. You need to go through each toolpath individually and make sure the bits, the cutting parameters (like depth of cut, stepover, etc...) the feeds and speeds, and such match your tools and machine. For instance, if you got the file from someone whose machine can cut 1 inch maple at 300 ipm in one pass, and your machine can't, you risk breaking tools and damaging your machine if you don't get in and change that. The only way to be sure is to go through each toolpath individually. If you just click Recalculate All, you really have no idea what the setup for each toolpath is, unless you go through them one by one. Since you have to do that anyway, it makes no sense to Recalculate All to begin with.
@@MarkLindsayCNC Thanks Mark. I should have thought that through a bit more. I clearly understand, now, why you did it that way.
Mark on your 5/8" 90 deg v bit how deep will it cut before it starts to square off the sides. Thanks jeff
What is the reason for tabs when using the tape and CA?
The reason is simple - operator error. Actually, I wasn't sure how I wanted to mount the piece of material to the table, so I went ahead and left the tabs, just in case I clamped or screwed it down. When I got the material picked out, it turned out that I didn't need them. Rather than go back and eliminate the tabs, I just ran it as is. I probably should have mentioned that in the final edit, but it really slipped my mind.
@@MarkLindsayCNC Thanks Mark!
@@MarkLindsayCNC I forgot to mention: Thanks for the tip on on using the MultiMax for cutting tabs! Do you have the small sanding attachment? I love it for sanding larger pockets
I don't have one right now, but I am looking into getting one. Right now all I have is a 1 inch wide cutting blade.
Wish he gave classes in my area
Well, what area are we talking about...? Stranger things have happened.
dead link for the file :(
Thank you for letting me know! The link is fixed.