Remove Front Door Panel Toyota 4Runner 2003-2009
Вставка
- Опубліковано 6 сер 2024
- Tools Needed: Door Panel Removal Tool- amzn.to/2edOemF
Philips head screwdriver- amzn.to/2eb9FQJ
Support this channel so I can make more great 4runner videos (Paypal): otcslappys@hotmail.com
Learn how to quickly remove the front door panel on a Toyota 4Runner 2003-2009. - Авто та транспорт
Thanks for this great video! I could not get the cable to pull out of the power window switch. but once I got all the other cables loose I was able to unscrew the 3 screws holding the power window switch, wrestle with the 19-year-old tab that was holding the cable into the switch, and replace the switch. The Switch Doctor on Amazon had a perfect replacement switch for my 2003 4Runner 4.7L AWD. A Toyota dealer quoted me $1,000 to replace the switch and I replaced it for $28 and about an hour of work. I'm 66 yo retired lady with no automotive repair skills at all, and I really appreciate that you share your knowledge. Thank you.
Thanks for the video. I found the bolt under the armrest and assumed the other may be behind that inner handle cover, but wanted to be sure. It was extremely easy. I had the panel out and broken mirror off within 10 minutes.
Since I was just installing a mirror, there was no need to remove anything more. I attached a 24" bungee cord from the top of my door to the panel, just to hold it in place.
To put the panel back on, I started sliding from the top to get started, then I used a mallet to bump into place, a flashlight to make sure the studs aligned with the holes, then pressed from top to bottom until all secure.
I really appreciate you taking the time to make this video. Just what I needed. Thanks...
i did replaced the passenger side mirror in my 2005 4runner and this video was right in the money, thanks a lot.
I just got a 2003 forrunner and your vids are Great Thanks
Thank you so much for taking the time to show us that… It helped immensely
Great video, Thanks! I was missing the screw behind the arm rest and couldn't figure out why I couldn't get it off.
On most models, the window/mirror/lock module can be removed without taking the door apart. On the 2006 4Runner it screws in from the back. This video saved me a lot of time and potential damage.
Great to hear. So glad we were able to help make the job easier. Thanks a ton for watching.
So simple! Thank you for posting this vid!
On your next video can you show how to replace the passenger side door lock. Keep up the great videos they are very helpful. You help me fix the lights in the climate control center thank you.
The door panel tool or a flat plastic upholstery tool not only does not gouge paint but also does not gouge the plastic. They are inexpensive. I keep 3-4 sizes handy.
Perfect instructions easy job.
Right to the point! Thank you for that!!
Great video, I just replaced all 4 on my 2008 4runner
I loved the video brother keep uploading more videos Thanks for the video greetings and more video
Awesome, thanks! Any chance for a video on replacing driver side door lock?
Super helpful made scraping old window tint from bottom edge a breeze
Excelente video. Thank you.
Thanks man, short simple to the point, had to replace my mirror and soon weather strip on my door(s)
Thanks for the encouragement! So glad we could help. Thanks for watching!
is this how you access the back of the side view mirrors to replace them?
Screw driver to pop the panel isn’t needed if you go on the right side of the panel there’s a lip just grab it and give it a good pull and it’ll pop. Love, the little tinter boy.
Спасибо, пригодилось
Thank you
Do I have to disconnect the battery? When replacing the window door switch and the door handle
Heya. I have a 2006 Toyota 4runner with 275k miles on the chassis and frame, and 171k on the engine, transmission, and drivetrain (2007 parts). My engine has the check engine light, VSC Off, VSC TRAC, and traction control light lit up like a Christmas tree on my dash. Also, at very low speeds and at low throttle, this sound from exhaust (I don't know if my cats are shot) is like a high-pitched rattling sound, NOT like a rock bouncing around on youtube videos you'd look up online about shot cats. My O2 sensors are all new and have been replaced WITH spacers on them. I took my car to the local automotive shop, they said to fix this they would need to mess with the exhaust, put new O2 sensors on and take the spacers off, then diagnose from there to see what's wrong. It's going to be expensive from them... I also am wanting to do this myself... I have a mechanic friend that told me that my cats need to be replaced but I'm not so sure it's the problem just yet... Any suggestions?
Geez, I hope you checked your gas cap first. In this 4Runner Toyota lose gas cap causes most of the dash to light up. VSC stuff etc…..and all it needs is gas cap tightened. Then drive for awhile or disconnect battery negative terminal for 30 seconds.
if i need to remove just the mirror, do i need to go mad with disconnecting everything, or just pop off the panel, and take off the 3 screens and wire for the mirror? thanks!
Pop off the panel and take off the 3 screws and wire. It's a quick operation.
How do I remove the door panel if the manual door lock (from the inside of the car) is jammed? Seems it’s impossible to remove the door panel when the door is closed.
You sir... is fucking awesome, I just subscribed and I hope you make more videos, this one helped me big time and most importantly happy wife happy life , keep up the good work
What is all the foam in the door? DIY or from factory?
Yes, I believe those foam inserts are stock. This car was purchased used, so there may have been some modifications from the previous owner. Thanks for watching.
I need to replace the tailgate of my 4runner 2005
please my I need a video how to replace tailgate for my 4runner 05,
Great video, however you forgot to mention to pull the middle of the black pin out first. I broke it because I didn't do it. Good video otherwise.
I broke mine too. The first thing he takes off. I had read about it before and forgot so I broke it. If you push the pin in first, it just pops off.
mine don't look like this at all