It's really amazing. My semester is about to start and I have bought the books but the content is not getting in my head. Your video fulfilled the concept successfully in my head. Thank you so much sir.
Amazing almost your covering all non conventional machining processes. Tomorrow I'm having exam I preparing by watching your videos only. Thank you so much.
Dear author, first thank you for a great basic EDM presentation. But as an EDM expert I must point out, that the most common polarization of the electrode is positive. Thus, the workpiece is polarized negatively. This is always true for rough machining. Only in finishing operations to achieve very smooth surface (and using very short discharge duration) the polarity switches. To my opinion, presenting the regular polarization of the electrode to be negative is misleading.
OMG I could kiss you. I know that the robot voice maybe off putting for some, but this video dived straight into the facts, fluently explained it through animation, and was under 10min long. Brilliant.
These videos are very informative and helpful for understanding the basic concept of the processes for engineering students like me. Thanks for uploading such videos.
Can't able to stop myself by appreciating this videos from your end sir. Thease wonderful without any unwanted things. Perfect videos that your doing. Hope you will do good videos on hydraulic machines and thermodynamics.
No, in EDM, the tool is typically made of a conductive material (e.g. copper or graphite) and is used to shape or cut the workpiece. When the tool is negatively charged and brought close to the workpiece, electrical discharges can occur between the tool and the workpiece, creating tiny craters or eroding the material in a controlled way. Secondly, the polarity of the EDM power supply can affect the shape and quality of the cut. When the tool is connected to the negative terminal, it can create a "reverse" spark erosion effect, which can result in finer surface finishes and sharper corners compared to when the tool is connected to the positive terminal. However, the specific effects of connecting the tool to the negative terminal will depend on the specific EDM setup and parameters, so it's important to consult the manufacturer's instructions or an expert in EDM to ensure proper use and safety.
who did you get to write the script ... someone from Pakistan ... because they sure cant use english grammar worth spit ... and whatever happened to quality control ... there are so many typos in the script they make the video useless
It's really amazing. My semester is about to start and I have bought the books but the content is not getting in my head. Your video fulfilled the concept successfully in my head. Thank you so much sir.
Amazing almost your covering all non conventional machining processes. Tomorrow I'm having exam I preparing by watching your videos only. Thank you so much.
Thanks from my side too. ❤️
thank you for your video sar. i have exam tomorrow and your video helped me your video is awesome
Meri b exam hai Monday ko
Dear author, first thank you for a great basic EDM presentation. But as an EDM expert I must point out, that the most common polarization of the electrode is positive. Thus, the workpiece is polarized negatively. This is always true for rough machining. Only in finishing operations to achieve very smooth surface (and using very short discharge duration) the polarity switches. To my opinion, presenting the regular polarization of the electrode to be negative is misleading.
Absolutely correct 👍
What i didn't understood by watching hours of lectures easyly understood by this vedio 💪❤️Thanks a lot 😘
OMG I could kiss you. I know that the robot voice maybe off putting for some, but this video dived straight into the facts, fluently explained it through animation, and was under 10min long. Brilliant.
This channel deserves millions of subs.....🙏
Right❤️❤️❤️❤️
These videos are very informative and helpful for understanding the basic concept of the processes for engineering students like me.
Thanks for uploading such videos.
Ma sha Allah. Alhamdulillah. Very useful video.
A great idea for complex and tiny engraving...🤗🤗🤗
Honestly saying excellent explaination with animation 🔥🔥
Can't able to stop myself by appreciating this videos from your end sir. Thease wonderful without any unwanted things. Perfect videos that your doing. Hope you will do good videos on hydraulic machines and thermodynamics.
Yes it was very good video to understand EDM machine thanks for your support 👍
Make more videos for mechanical engineering student to understand better Thank you for giving information in easy way great job sir 🤍from Karnataka
You're a genius ❤
I love how clean clear and categorical you made the video 👏🏻👏🏻👏🏻👏🏻
Thk sir these videos are helpful in my working time
It's very good explain tq sir..☺☺
💯 Thank You for the Lecture !!!
very precise explanations. Good job
Knowledge spot@ ADTW 👍💯
Excellent explanation ❤️ , keep going man⚡
Thank you... And it's ADTW
@@ADTWstudy oops! ,,
👍corrected
What I didn't understand by reading books simply understood by watching this video.
Excellent vedio, Thank you
clear explanation, thanks
Very good explanation.
Thank you sir.. 🙏
You're welcome, support my work by sharing it with your friends...
Very Good Explanation....👌 Please Do Video On Wire Cut Electric Discharge Machining Also..
It helped me a lot
great work. keep it up bro. life saver
Your videos are awesome! I learn a lot with these, so good made, nice work man!
Nice explanation
Make a video on wire electric discharge machine
Nice Explanation.
Plz make lectures on thermodynamics and fluid dynamics related topics like working of turbines,pumps,boilers etc
Really i like this video and i understood better than lecture ❤️❤️ keep it up and make some more videos
Great! Keep going
Thanks a lot, please keep making more videos❤
Thank you 🔥💙
Advanced technology best💯💯
Super bro ....
Thanks bro❤
THANKYOU SO MUCH!
Thank you so much sir!
Support my channel growth by subscribing and suggesting others to subscribe so I can keep on creating great content like this for you...
Thanks a lot
Thanks a lot sir :)
You're welcome, support my work by suggesting it to your friends who are looking for videos on this topic...
Super
Very helpful
Thanks a lot Sir. Very informative teaching. I have subscribed to your UA-cam channel and will surely suggest my friends to join you.
God bless you.
Thank you...
It's good.But sir,Can you make a video for hydro-forming process and types of hydro-forming process it's all for study purpose.
Thank you
Sir please Make a separate video on wire EDM
I understand 👍
Pls make a video on Wire EDM similar to EDM sir...
What is the sensor that senses and prevents the workpiece and electrode from shorting. A shunt resistor,?
Great
Sir plz provide notes or written work for components too
Visit: adtwlearn.com
Please make an animation about ion beam machining or ibm
When somebody ask what do I do at work I´ll show him this.
Is it possible to process carbonfibre or Titanium with EDM?
Gopu ji
Thank to you
Can you show me how to overcome problem when heat is occur to much in this process?
I learned in the books that the tool is connected to positive terminal and the piece to the negative one. Am I wrong?!
No, in EDM, the tool is typically made of a conductive material (e.g. copper or graphite) and is used to shape or cut the workpiece. When the tool is negatively charged and brought close to the workpiece, electrical discharges can occur between the tool and the workpiece, creating tiny craters or eroding the material in a controlled way.
Secondly, the polarity of the EDM power supply can affect the shape and quality of the cut. When the tool is connected to the negative terminal, it can create a "reverse" spark erosion effect, which can result in finer surface finishes and sharper corners compared to when the tool is connected to the positive terminal.
However, the specific effects of connecting the tool to the negative terminal will depend on the specific EDM setup and parameters, so it's important to consult the manufacturer's instructions or an expert in EDM to ensure proper use and safety.
@@ADTWstudy Thank you for the explanation.
Here which is anod and which is cathod???
direction of electricity-shoundn't it be from positive to negative outside the source!????
Current flows from positive to negative but electrons flow in the opposite direction...
How many ampers
?
Is their any process name called as "electro gel machining"???
As per my knowledge there is no such machining process.
Coordinator measuring machine
Hey, your voice is like zendex gamer (Pubg player) .search in youtube "zendex", you will find same voice like yours 😀😀😁😁
Sir send me the link
I use three wire edm's, I'd add to the cons of these machines that they're slow af
Hi
Sir yahi hindi mai nhi hai
Precision of up to 0.005.... what? bananas?
You talking millimeters, right?
Yes, 0.005 mm... Usually, in engineering, small distances are measured in mm...
who did you get to write the script ... someone from Pakistan ... because they sure cant use english grammar worth spit ... and whatever happened to quality control ... there are so many typos in the script they make the video useless
Very useful