Honest Review: New REKT Opfour, a Gas Operated M16 Nerf Gun
Вставка
- Опубліковано 28 вер 2024
- Support the channel and my craft at: foamproshop.com/
Would you kindly subscribe? tinyurl.com/Sub...
Rekt available at: www.playrekt.com/
vvvvvvvvvvvvvvvv---( Keep Reading) ---vvvvvvvvvvvvvvvv
So its here! an M16 gas powered nerf blaster that pulls no tacticool punches.
Does it deliver the performance we expect from the rifle synonymous with air-soft warfare?
__
Vlog Channel: tinyurl.com/Dra...
__
Patreon: / drac
__
My Instagram: / lorddrac
__
My Facebook: tinyurl.com/Dra...
__
My Twitch: / profile
__
Thanks for watching!!! Much Love, Nerf On.
My fanmail address is:
Drac Thalassa
4426 Hugh Howell Rd.
Ste. B 192
Tucker, GA 30084
#DracNerf #PlayRekt
Inconsistent results can be down to bassically three things: 1- not having a good seal on the breech. 2- not having a consistent hammer strike. 3- a too constricted flowpath from the bulk chamber to the expansion chamber in which the hammer valve sits (it seems all the extrenely high shots were the first of a couple of shots). These are the things beyond the normal variance which is caused by temperature changes in the bulk chamber. Only point 1 and 2 can easily be improved (safely). Good luck with the breakdown video! I gave you a like hoping you’ll do that vid. Also thanks for doing this one.
Pin this please
BTW, I printed one of your longshot stocks and it is absolutely freaking fantastic
I haven't seen the internals, but looking at how it primes, it appears to be an inline "Nelson" style valve. With rough components in a plastic body, there can be a lot of drag and inconsistent results. The paintball solution (other than simply a more precisely manufactured body and components) was to pull the internals and polish them. You can pull the sear off the hammer, chuck it up in a drill press, and get the outside to a mirror polish with emory cloth, etc. You'll also want to polish the valve stem, and true up the shoulder with a file if there are any burrs on it. The inside of the hammer shouldn't contact the valve stem, but if it does you can pull off any burrs with a Dremel. The plastic body remains a problem, but you can do one of two things - either relieve the body on the inside enough so that the hammer doesn't touch it, or add brass rails using shim stock and epoxy. Lastly, since you're in there, you'll want to polish the hammer sear and bolt lip to improve trigger pull. Test it with the guts out of the gun, and make sure the hammer and bolt click together without canting the hammer too much. You can also polish the rear lip of the bolt to get a better release on the hammer. There are also things you can do inside the valve, but your average hobbyist probably isn't going to open that up, and it involves more precise tools to do things like lap the valve seat (although I've seen it done with a mirror and cloth).
One thing you ARE going to want to do is to look at where the release point of the trigger is. If it's all molded plastic components, it's very possible you're getting inconsistent release on the trigger. This is more important when using the "autotrigger" function of a Nelson setup, but it can cause some velocity variance. The correct solution is a replacement metal trigger (and transfer bar if it has one) that's more precise.
NIRODHA’s Aftermarket Nerf Par
Theres a chance the temperature of releasing co2 is causing those changes and inconsistencies. They may need to change the tolerances or use different materials for the seals, etc. As you shoot co2 it gets colder and colder. Might be a hot weather blaster.
@@NeoIsrafil well... CO2 certainly has a cooldown effect lowering the pressure. But with an unregulated pressure source and a hammer valve some ‘magic’ happens which normalises the amount of gas in the downstream system. The ‘magic’ is actually quite simple: if the pressure in front of the hammer valve lowers... the valve will stay open longer due to the hammer strike being consistent. The volume of gas will always be the same. Normally this shouldn’t cause too much issues.
The box claiming the dart flies perfectly straight would not violate the laws of physics if they tested it in space though.
Ah yes physics
Test in a vacuum
Or if there are fans facing up
Or hop up😳 on a cylindrical projectile lol
They could also advertise it as the spaace blaster, you could potentially use it in a vacuum, as opposed to springers. This is the only pump action nerf gun that can be used in space.
it is an M-4 carbine
the smaller cousin of the m-16
Exactly
It's mixed with an HK416 and some after market AR-15 sights
Yes I was very confused at first as i saw m16 and my mind started going hzudjdgjwbdddhdidhffi
Turns out it's not an m16.
Thank you I was losing my mind when he said “iTs A lITtlE sMalL tO bE aN M16”
Thank you 😤
At this point of toy guns, an airsoft gun would be better
Tbh I just use rival blasters mainly cause you can buy one and have it out of the box working great no need to extensively mod
@Jerence Aviado thats why I said I like rival blasters you don't gotta mod them for them to perform good
What is the point of this? Why not just play airsoft...
@@tabernaclejones6115 Nerf is more safe than Airsoft and doesn't require too much setup; In airsoft you generally need to have a large field, lots of BB's, multiple backup gas cans/supplies, the list go on and on. All you need for Nerf at the very core is just a few blasters and some darts. Maybe a decent sized play area, but otherwise that's all you need. Don't even get me started on the risk Airsoft brings because of the realistic looking guns and even then Airsoft guns are banned in many places.
@@Alphine_Agnitio i just need a airsoft gun, bbs, battery, and glasses. Nerf can become complicated too
The issue with co2 guns is that as you fire, the co2 rapidly chills the valve and other internals. This causes the drop in velocity after each shot that you see here. As an airgun nut, I'm all too familiar with this, funny to see it in a nerf gun though.
Lord Drac
Super great review of a non standard product. Thanks for providing us with such fantastic reviews. Love the facts and opinions. Keep up the great work and stay safe.
For the size of that magazine looks more like an AR-10 which is chambered in a bigger round (7,62x51 vs 5,56x45), and yes, that's the actual size of that "M16" SBR-like
Ah yes, the majestic M-16, cleverly disguised as a blue-camo M4
Personally I really appreciate front loading pistols. So the opsix is ideal. I like not having to deal with high spring loads for almost the same power. This is a very innovative product from a good company and I'm excited to see what else comes out.
Heading in the right direction seal isn’t perfect though sadly .
CNN- "At 9:48 Guy points his Full auto single shot AR15 at pink haired dog" 😂
Thanks for the review on this. I’ve been eyeballing it.
so basically it's an airsoft pistol but bigger and shoots foam
Rapidly discharge lowers pressure due to temperature I believe. Need more time between shots maybe?
I was hoping for the cost of two C02 cartridges you wouldn’t need to rack each shot. I suppose that makes sense because the original nerf gun was designed this way and the mod just adds pressure to the shot?
With that mag it looks more like an AR-10 as that fires a .308 compared to the smaller 5.56
Hi Drac, great video as usual. I'm one of the less-abled players, I'm building my first HPA blaster next week when my brass order arrives, the easy priming is what has enticed me to start in HPA because stronger springs means more pain. Can't wait for you to take a look inside this blaster. I'm in the UK so don't know if this will be available here.
Aw man, once you get used to manually priming HPA with no spring weight to fight against, you'll wonder how how ever lived! Tried priming my 16kg LS recently after 12+months of bolt and semi auto HPA, and it was a struggle!
Drac wrecked the rekt
Here's something that would be awesome. HPA rig with a remote line, semi-auto, with a high rate of fire
Did anyone notice that the co2 shot line brakes the box line?.
2:59 it’s not illegal but suppressors are regulated? You can use them on air guns if you can prove intent. Pyramyd air did an article going into depth and speculation. If you plan to look into getting one do your own research and decide for your self.
Edit: do not do anything without doing your own research. I put this info here because I’m sure drac is smart enough to use it. (It is possible to use them).
Do not use any of what I wrote. I am not an expert.
Here’s a perfect world answer: The NFA (The National Firearms Act of 1934) currently does not give the federal government the ability to prosecute suppressors for air guns. So making an air gun suppressor is legal in the United States (at the federal level) as long as you intend that suppressor to be only used on an airgun.
ALSO part of the article from pyramydair: SO WHAT? We're talking about airguns here!
Yes we are, and most airgunners know that the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) has jurisdiction over firearms ONLY. In fact, U.S. Code specifically prohibits any federal, state or local municipality from declaring an airgun to be a firearm. Not only do the federal firearms laws NOT apply to airguns, they CANNOT be applied by law! But that doesn't get us out of the woods.
However...
IF you have an airgun silencer, and IF it can be removed and installed on a firearm, and IF it then quiets that firearm - that silencer meets the legal definition and is subject to the law. However, in the United States, a person is considered innocent until proven guilty, so it is also necessary to prove intent, as in you intended to use the silencer in your possession on a firearm. Therein lies the problem.
Check the size of the darts diameter with a caliper?. As I think the worker 2 may have a slight change in size. As a dart with a good diameter can be better performance.
I was excited at first. I was hoping the gun would be semiautomatic. I was hoping to replace my Alpha Trooper.
Me being the firearm enthusiast that I am, that Nerf rifle is based off of the M4 CQBR and not an M16, though if the barrel and handguard were longer, it would be an M16A4
If they want my money, they will make an AK varient, and they will make it consistent.
If it’s co2 powered it’s not a suppressor therefore it’s not illegal
Green gas/propane would be more practical than the CO2
Feels small to be a M-16? Probably because it's meant to replicate the M-4.
The carbine (small version) of the M-16.
Does he mean the darts it comes with are fvj?
for everybody saying “play airsoft” , ever consider the damage a small hard BB (lmao) at 200fps does vs a soft pliable dart at 100? especially indoors?
200 fps consider as average on airsofr
Anyone else see that Chupacabra at 8:35?
"the gas flap"
Jesus christ
i think it is ment to be an m4 carbine (the short m16)
Seems like its a nice plattform to HPA tap it
Just so you know, that is not an m16. It is more M4A1/AR-15 like
So at best it's a king of modded blaster. At worst its a deploy. RNG the blaster!
I definitely wanna see a breakdown!
Not M16. It's an AR15
Can you try to use dzp half mags and talons?
Looks like you got the 2k
Not a Magpul stock it’s a crane stock
wash your hands
Rowbot Yes
This is not an m16 it is an m4 the stock is a dead giveaway no m16 model has ever had a collapsible stock they have always been solid whereas the m4 stocks have never been solid and have always been collapsible. The upper rear sight is also not an m16 upper rear sight and the barrel is too short to be an m16 even an a4 ps not being a dusche just correcting a fairly common and easy to make mistake
Great video!
Alright, for everyone freaking out that he called it an M16 and pointing out that it's an M4, cool it. It doesn't matter. Its a review of a nerf blaster not real steel. And you're wrong anyways, Its a Mk18 Mod 0. The barrel is too short to be an M4, and the LMT rear sight is a dead give away of the Mod 0s. Since half of you look like you don't know what you're talking about you can relax.
VikingJester11B nah it’s an m4
@@rozcoegotgame3591 my dude, I'm holding a real steel M4A1 in my hands right now and I own a Mk18 clone. I can point out several distinct differences between the above and an M4. What's your argument that it's an M4 and what's your experience to be able to say so?
@@vikingreconnaissance its more of an AR platform in general than anything
Say Hello To My Little Friend!
If its co2 then there no need of pump action
Can you please turn down the music in the intro it’s really loud compared to your voice.
That gun is a mk .18 cqcb with a m4 stock and a cqb barrel
Tag 2 electric boogaloo
I feel like it not being semi-auto kinda ruins the point.
ik, if you're gonna do C02, at least make it blowback. Personally if i could redesign this i'd turn the buffer tube into an m16-style Full stock and make it be able to fit a ton of c02 cartridges, then make it semi or even full auto.
Yep.
@@junglejim9551 I agree blowback is better but that would use up way too much co2
Same. What's the point In keep racking it back. I'd like to see a full auto nerf rival. Take my money
If this was consistent I would buy it in a heartbeat! I want to see V2.0 soon!
pinned comment be like: am i a joke to you?
Doesn't seem like the CO2 isn't necessary at all if it's a pump action...
co2 instead of spring it doesn't have a blow-back action to shoot semi/full auto
Tgat hiw you load a roubd in the chamber
@@maximwalker2565 takes alot of gas to to that, it will not have similar performace to this at all
IKR
@@ShiniSabayh, was just explaining why it had to be pump action. i am used to airsoft where one canister last a really long time (with blowback)
You definitely need to find a way to mod that to get consistent one seventies. That would be one awesome blaster that I would be willing to throw so real money at. Honestly I would think some bridge modifications would be all that it would need considering that it did hit 170 a few times
Modifying c02 is risky, you are venting high pressure gas, messing up things can cause explosions. Not a huge deal, you just have to know what your doing. A lot safer than HPA as well
To everyone saying "Why not just play airsoft at that point?" I respond: Must be nice living in the States. Over in Europe Airsoft is heavily restricted and in my country (Netherlands) you need to get a warrant/minor background check before you can even apply for an airsofting permit. Yes, permit!
This is innovation for innovation's sake, and it's super cool to see new stuff being attempted in the hobby, by a company known for generally good CO2 airsoft products. Them stepping into the hobby like this could be a very fun move, just like Slug keeps innovating with new types of power delivery.
Thanks for the vid, Drac. Love that honest feedback - that's why I've been subscribed for as long as I've been nerfing.
Veetalin Yeah, say that to California.
But that sucks. In Nevada. You need to prove you're older than 15. This isn't even a joke.
@@firepower7017 Simple: grow up.
at that point might as well just play paintball. oh wait it’s 18+ in some countries in europe as well.
also people forget that nerf is safe and that’s fun especially for indoors, where airsoft can really break a lot of stuff...
Imo it’s comparing apples and oranges, like comparing helicopters to jets
Move to Texas
When you are so early that there are no people promoting their own channels
darius filip u want me to change that?
Jk
This is actually a way for you to sneakily promote your channel
Umm I did not know @Hellfire UK,I don't use UA-cam for that
As cool as it is I would have thought a rifle like gas powered would at least be semi auto, I’ll probably get the pistol
I surprised he didn’t talk about the mag, I won’t fit in any other gun, the slant on the mag lip (is that the right word... I’m a keep using that word) keeps it from working in anything else
While you are right, the lip on the mag doesnt allow it to be used with other blasters, it can still take nerf mags which is equally as important
OpFour sounds like "Opfer" xD and opfer means in german Victim 😂
Opfor is a term meaning Opposing Force, a common term in military jargon, which is what this is most likely named for
My brain: marines v opfor on bog tdm using a sniper
*OPFOUR LAST OP STANDING*
it's for opposing force
This guy looks like dexter if his mom was murdered by nerf guns.
Ah I thought it was like an actual gas blowback rifle and would be semi auto based on the fact Umarex made it
At only 100 fps and still needing to prime, might as well use a K31 or 788 Talonclaw. For those that are unable to prime, a flywheeler is probably better since this doesn't seem to have the accuracy/consistency of a springer anyway.
The M16 had a fixed stock, carry handle rear sight, A1 front sights, a 20 round box magazine until the late 80s early 90s, Safe. Single, and auto selector switch, and a smooth front handguard. The "rifle" here is a depiction of an M4A1, with a collapsible stock, pic rail along the entire top of the rifle, and a pic rail front handguard. Dont call somethin an M16, if its not an M16
Not even an m4. This thing is a shorty ar-10
it's just a foam finger lol chill
Hes a nerf guy... I'm just glad he got it close. Lol
@@adabus16 True, the mag looks more like .308 then 5.56.
It looks like a dmr i did a conversion for my M4a1 carbine and it shoots .308 I had to do a lot of internal and external work like enlarging the ejection port and a bigger magwell
*puts stock on buffer tube*
"Let's go ahead and throw the buffer tube back on top"
So many incorrect gun terms.
Pretty cool, but the only practical use i see is for those who want a manual blaster but can’t manage the heavy spring loads in caliburns, due to age, fitness or disability.
It also lets you shoot for longer without exhausting your arms?
notforsale today and it looks like a friggen m16
"""m16"""
you have angered me for the last time
;) its almost like I do it on purpose
I know right. It is clearly an M4 which may be similar to an M16 but is more tactical and usually has a shorter barrel.
NIGHTMARE_CORP thank god someone pointed out that it wasn’t an m16
Yah I was watching this the whole time confused. Because this looks almost no different from a M4A1
its not an m4 either, it's a mk. 18
edit: it could be a C8 CQB as well ;p
“Cuz I’m blue, ba ba de ba ba di”
I am sorry but this just infuriates me, its da ba dee da ba daa
The cringe i feel every time you say it looks like an m16 is tangible, a more accurate description would be it looks like an ar-15 or m-4 platform... definitely not an m-16 👍
It’s probably more so based of the M4 carbine
Wait ain't the M4A1 and M4 Carbine basically the same ?
@@thefatman8844 m4a1 shoots full auto
Oh okay
carbine is shorter, since it´s a carbine rilfe, not a full sized rifle.
M4-Carbines can still be full auto.
Yeah.
Almost the same.
@@iammrbadguy9706 the M4 carbine (exact designation, M4, that is) is three round burst, being a minimised M16A2. An M4A1 is full auto.
Sorry drac but it’s actully an m4 and not an m16
I wonder if he/she will ever get sleeves that aren’t boarder line tank top length. Eat some food.
paint it plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Isn't that a m4,love your vids
Hold up, it's CO2 powered, but it's not semi-auto?
Literally WTF... Hot freaking garbage.
Pretty sure that’s an m4
I'm very surprised with this blaster. I was not expecting a $90 blaster to perform that well.
It's sad when we've reached a point where 90$ doesn't garantee performance
@@themadkraken1912 It does in the rival lineup at the least for any other nerf blaster series though who knows
I don’t want to sound rude but this is not an m16 but a mk18 mod 1
which is basically a shorter m4a1
The m4a1 is a shorter m16 the m16 looks like this gun but the barrel is between 19 inches and 20 inches
With a non adjustable stock
While the mk18 and m4a1 are 10.3 and 14.5 inched respectively
I remember in vietnam, we pumped our M16 with Foregrips, M4 Stocks and Sights, I remember customizing my Handguard.
I wonder if there’s a way to make the blaster hit harder I don’t have one but perhaps there’s restrictor in the interior. I do have a bunch of co2 airsoft pew pews Obviously co2 can hit much harder to an 90 fps so I’m interested
Hey drac you probably won’t read this but i love your channel and have watched all of your videos. I’ve been subscribed for a while. :)
Sorry but the CO2 airsoft pistol you're making fun about, is not the one i'm using, i'm using an actual CO2 airgun, which is a Glock17, not a CO2 airsoft pistol.
Lastly, you're calling an MK18 MOD0's stock a "Magpul stock"? You are one uncultured man huh?
Doesn't look like an m16....
Everything points to civilian ar15 except for the area around the shell ejection ports...
I just don't see an m16.
Infact, on closer inspection, It looks like an m4
I know you probly don't care and it's not a problem these things just irritate me....
Based off this video, i'll never buy a rekt product.
They seem to have ZERO idea on how to send a NEW PRODUCT that FUNCTIONS....
Can you mod it to be hpa?
Quote from the REKT website : "Breaking the valve" Takes about 12 shots to break in the valve for first time use in a day of play (due to extremely strong valve spring required to limit the amount of CO2 for operation. So i guess you need to shoot 12 times to reach full consistency...
If you think the pistol they brought out first is a side arm and the m16 in this video would be a primary it makes sense to me that the pistol isn't as powerful compared to the rifle
But it's look like ar 15
And he else thinking Pfffffft... my Caliburn/XZeus 2/modified springer/high powered fly wheeler does 2-3 times that velocity?
Your dog is really cute
After 4 weeks of use, mine leaks around the piercer, rendering the gun useless. A friend had the metal cocking frame (contained within the plastic cocking handle) break. Apparently there are no repair parts available. Very disappointing. For a short term toy, it is ok, but it is a throw-away.
Thought, it would be semi-auto. Where is the point in a C02-powered blaster, if I just use/mod a regular, spring-powered, pump-action nerfgun?
I could see why you’d mistake it being based of an M16, its actually the shorter version, the M4, i mean the M4 and a few of the M16 variants are burst (M4 is the burst version, the M4 “A1” is the full auto variant) and they are in the same family of rifles, but it is an M4.
Hey comments, would a back mounted cheddar ball jug with clear tubing out the bottom work for increasing Prometheus hopper size?
I would kill for this
If it was semi auto
I really don't care to have a co2 powered blaster if it's pump action. Umarex needs to have a sealed chamber and a blowback system to make this worthwhile.
Edit: also should come made for half lengths. No need for this kind of power if you can't shoot straight.
Why would you design a gun and make it single shot if your working with high pressures, honestly, I actually created a blowback system, it was very basic but full auto hpa with consistent shots over 220 fps, couldn't really drop it because the spring for the blowback was too strong
It's modelled after the US MK18 CQBR , a variant of the M16 used by Special Forces units by many countries.
I'm super new to this guys. At what FPS does players need mandatory eye protections.
I'm thinking of integrating "pro grade nerf blasters" in a larp event, but. At the same time, I want to hit that sweet spot where ppl don't need glasses.
Thanks 😎
I suggest taking the rear iron sights off, and putting an actual optic on it. i put a ~50 dollar 3-9x40. anything that can be mounted on 20mm picatinny rail can be mounted on the rekt opfour.
Would be really cool if it didn't need a prime, I think that was the whole idea of a CO2 blaster, semi-auto firing without revving up flywheels.