Its like changing the gearing, stock Honda gear ratio is good for 72 mph at max revs, with the upgraded variator and heavy roller balls, the gear ratio is longer so max engine revs is 86 mph, but only if there is enough power to weight ratio and a very long straight to pull the bigger gear to top speed. If you are a tiny guy, 7 stones 100lbs then maybe with 15 horsepower and a bit of downhill you might reach top speed 86 mph. The main gains are much better fuel consumption and potential for more speed than 72mph. The compromise is that a longer gear will be a bit slower to accelerate. You will notice this in town riding. Overall the upgrade is very helpful for highway riding 80 to 130 kph so you can keep up with traffic and it adds about 60 to 80km more tank range. In town its a bit slower off the traffic lights. If you also upgrade the exhaust pipe, air filters and remap the fueling to 19hp that changes everything. Then you have enough power to max out the big gear unless you are a fatty.
Hi Derek the heavy doll and the balls have nothing to do with the engine speed the engine only changes the speed by a programming, in the brain of PCX Also in everything else you said you are absolutely right.
I have a pcx 150 which originally tops at 116kph on the highway. Then i bought an aftermarket pulley and drive face with dual degree and bigger drive face diameter it has reached 122kph
Hi cristian I don't know what your ethereals are, but for me up to 137 kilometers peaks above were not needed, we are talking about 5, two or 3 kilometers, I don't think there is a reason.
@@MBPATENTS Thank for your reply. I understand as my big bike is very easy to drive in USA, but I purchased a PCX150 for my 2nd home in Thailand where the PCX is absolutely the perfect transportation! Great video and excellent machining skill.(please wear gloves next time you are grinding metal!)
Well theres teenagers like me that on the paperwork it says all stock and can drive in thailand only 150 cc so i make some tune to have fun thats all meanwhile in my homecountry in italy i drive a 125 cc honda sh
Yeah, but the key to this is MPH and milage for some of us. I'm looking for a 200mile a day commuter that gets close to 100mph and could be easily modified to do 75mph. This seems the closest fit, and it's around 4k in price. I'm impressed.
Very nice work man. I would like to ask you something. I have a honda x8rx 2001 model. 36000km. The reason that I went to mechanic was that i was having a problem turning off as i was driving. I changed piston and after 400km i have the same problem. Only if i leave it cool will start and go again. Thanks again
Hi bro this damage will never come from the piston, the engine shuts off when you started it only comes from the current three points you need to check the multiplier where the wire goes to the spark plug second the wires of the switch that puts the key and third is some wire that doesn't make good contact it can also come from coils. If you look at the coil, if it is correct and the coil, when you remove the flywheel, clean it very well because the machine is old.
@@MBPATENTS Good morning the problem is appeared when i accelerate. If i leave the moto for one hour it turn on again.. my mind was that it will be wire (electrical or fuel) ⛽ problem.
Why did you file the part of the cylinder channels close to the hub? What is the purpose of this? I understand the outer parts. To move the belt higher. Thank you.
Hi Alisian Yes, you said it correctly, in order for the belt to arrive thinner for 10 km more, also the 3 grooves that are machined near the axis are for the 21mm balls to enter, so it is equal to the 20mm balls, the banner part, so at the end the 21mm balls work more therefore 9 km more than before!
@@MBPATENTS For valuable information for you. Finally. I have a Dayang Vorei 150 cc motorcycle. And it has the same dimensions as the PCX variator. The ball dimensions are 20x15 13 grams. What will be the result if I apply the rasping process you did and use a 21x15 13 gr ball?
@@MBPATENTS First of all, my friend, I enjoy watching your videos. I have a 150 cc dayang vorei. I lengthened the baga channels a little and took 0.5 mm from the front pulleys. The original luggage of my motorcycle is 13 gr. While it was seeing 130 km on the center stand before, it saw 160 km after these operations. However, it does not go above 110 km while driving. If I increase the baggage weight to 16 grams, will the top speed increase? Or what should I do? thank you in advance
Καλησπέρα έχω το PCX 150 2016 φοράει φίλτρο DNA και Μπίλιες Techpulley 15GR αλλά η τελική μου είναι 110km/h μόλις τα φτάσω το μηχανάκι κόβει σαν να σταματάει η αντλία επαναλαμβανόμενα δεν με αφήνει να τα ξεπεράσω ενώ το μηχανάκι έχει τη δυνατότητα. Το TPS το άλλαξα αλλά δεν βρίσκω άκρη.
Hi ThePembet oh bigger cylinder opens up the variantor a bit more as far as the biggest up to a millimeter bigger but for this to work you have to remove it i will thank you very much for your attention
2 роки тому+2
It has absolutely nothing to do with 138 km. If someone goes on the road and gets on it and does 138 "on the straight road", it means it's doing 138. There is such a thing as wind. There is such a thing as rubbing against the ground. That motorcycle can 120 km maybe barely do it.
To iste mi da aj moja honda pcx s variatorom športovim.Ale s jednou podmienkou sadni si na tom a prejdi sa či ti da 140 km za hodinu neda lebo mne da najviac 112 km za hodinu,su tat totiž faktory,odpor vzduchu,plexištit,vaha človeka atd.
So what was the name of the parts you bought an what website ? I really wanna do this upgrade on my 2018 Honda pcx 150. Short story had a tire blow out took it to a shop they removed the muffler changed the tire an now it barely breaks 60mph when it was doing 75mph before 4!I took it in. Greatly appreciate the names of parts an the website
Did they properly replace the exhaust gasket? It may have an exhaust leak, which could affect the O2/Evap, or just anything else in general by the decrease of back compression. These new systems are sensitive, and if one of the sensors is getting a bad reading, it may change a lot in how the engine runs.
will this provide any gain on a 2019 or 2020 model, the gears a much longer on the 19-21 years, I plan on getting a set of 2013 or similar gears for my 2020, but would this work with stock gears?
I have GY6 engine 2021 brand new 125 cc scooter.It has 8.6 HP.Does changing to heavier rollers make better fuel consumption also speed? I do not know what is the roller weight of it actually?
@@MBPATENTS Yes I saw it.But what grams are 125cc scooter's rollers? I want to buy a little bit heavier Dr Pulley sliders.The engine now has 520 kms on clock.
@@ditiks4638 hi my UK 2018 model 125cc AJS modena has 15 gm standard I get aprox 80 miles to the tank with about half a lt still in tank. My tiny tank only holds 4.7 lts
καλησπερα φιλε μου,εχω το ιδιο pcx με σενα με 77000 χλμ και ειμαι πολυ ευχαριστημενος...φοραω φιλτρο dna και dr.pulley 14gr....τσουλαει σχετικα καλα...απλα επειδη τωρα πλεον λογω δουλειας βγαινω σε ανοικτους δρομους εχεις να προτινεις κατι αλλο οσο αναφορα μπιλιες η οτιδηποτε αλλο ωστε να μπορω να κραταω τα 100 χλμ π.χ με ποιο χαμηλες στροφες και να πηγαινει ποιο ανετα?σε ευχαριστω
He would just be speaking some mess of phillipino and English with a lot of goofy sound effects. We are lucky that he isn't saying anything. I'm really not impressed with the machining that he's doing. It's not accurate enough, there will be lots of vibration from the run out of the parts at high speed.
Hi Hicham Bagli In this video I have 23g I do not recommend it or the best choice is 12 g the original is 16 g with 12 the pcx will become a little more nervous!!!
Δεν πιστεύω να πάθει κάτι μέχρι 1000-1200 στροφές, ανάλογα κ ο προγραμματιστής παίζει μεγάλο ρόλο τι μίγμα θα σ' φτιάξει. Χλμ δεν το ξέρω τι θα σου βγάλει. Ένας φίλος μου έβαλε εκκεντροφόρο κ προγράμματα έβγαλε 130χλμ κ ξεκολλάει καλά.
Γεια σου φίλε μου Έχω ένα sh150i του 2009 Επειδή το θέλω για εργασία, κάνω 100χμ την ημέρα, τι σετ προτείνεις για να δουλεύει χαμηλές στροφές στην περιοχή των 0-40χμ/Ω Ένας φίλος σε sh300i έβαλε φουλ σετ mallosi με 15.5γρ μπίλιες και το μηχανάκι δουλεύει πιο χαμηλές στροφές, μπορείς να κατεβαίνεις λεωφόρους με 60-80 στην κίνηση και το μηχανάκι είναι ρελαντί Βέβαια αυτό είναι 300 και έχει τρελή ροπή, αλλά μου την σπάει που το 150 ανεβάζει λες και είναι 50 Έχω το μαμά variator και όλα τα ελατήρια mallosi που είχα βάλει τα έβγαλα και έβαλα πάλι τα μαμά Από εργοστάσιο φοράει 12.25γρ μπίλιες και έχω δοκιμάσει από 10 μέχρι 13, τώρα έχω τις 13 και το μηχανάκι στα 90-100 δεν είναι ανεβασμένο όπως πριν, όμως αυτό που με ενδιαφέρει είναι η περιοχή 0-40 που τώρα ανεβάζει πολλές στροφές, μην φανταστείς όπως όταν είχα βάλει 10γρ μπίλιες, αλλά και πάλι θέλω πιο λίγο Μήπως φταίνε τα λευκά ελατηριακια mallosi που έχω αφήσει πάνω στον φυγοκεντρικό;
🤣🤣🤣Küçük olduğunuza inanıyorum o yüzden bunları söylüyorsunuz pcx eğlence için 173 km'ye ulaştı, şimdi rüzgarsız düz bir çizgide 142 km'ye ulaşıyor!!! 😉😅🎄Mutlu Noeller
Its like changing the gearing, stock Honda gear ratio is good for 72 mph at max revs, with the upgraded variator and heavy roller balls, the gear ratio is longer so max engine revs is 86 mph, but only if there is enough power to weight ratio and a very long straight to pull the bigger gear to top speed. If you are a tiny guy, 7 stones 100lbs then maybe with 15 horsepower and a bit of downhill you might reach top speed 86 mph. The main gains are much better fuel consumption and potential for more speed than 72mph. The compromise is that a longer gear will be a bit slower to accelerate. You will notice this in town riding.
Overall the upgrade is very helpful for highway riding 80 to 130 kph so you can keep up with traffic and it adds about 60 to 80km more tank range. In town its a bit slower off the traffic lights. If you also upgrade the exhaust pipe, air filters and remap the fueling to 19hp that changes everything. Then you have enough power to max out the big gear unless you are a fatty.
Hi Derek the heavy doll and the balls have nothing to do with the engine speed the engine only changes the speed by a programming, in the brain of PCX Also in everything else you said you are absolutely right.
I have a pcx 150 which originally tops at 116kph on the highway. Then i bought an aftermarket pulley and drive face with dual degree and bigger drive face diameter it has reached 122kph
23/12/2023
Obviously it can reach 140 km/h with the free wheel, but the top speed would be 110 km/h against the wind and weight included
Hi cristian I don't know what your ethereals are, but for me up to 137 kilometers peaks above were not needed, we are talking about 5, two or 3 kilometers, I don't think there is a reason.
Nice work!!
Nice video sir, how many grams is the roller weights?
you have 113k km on your pcx? wow that is amazing 👌
Thank you very much!!
Cuba tukar PCX V4 punya rumah roller je.
Long preparation congratulations
+John Smith yes 🤫
nice way to f.... up the variator lol
You don't even know what a variator is and hiw it works so what a f.... up reply. Lol
Could you recommend the specs of all these parts for my PCX 2014 150CC i want to improve too.
Hi rith variator dr. Pulley 9 roller it's a good upgrade you'll just be happy in my opinion.
Wow, amazing ODO kilometers, more than 100.000. How is the frame? Is there oxide?
Hi Angel i can't understand you explain me a little better you need some help
Hier wird großer Humbug gezeigt!
Hi @t.g.2860 vielen Dank für Ihre netten Worte!!
Wouldn't it be easier to get a bigger bike? I drive a ZX-10R that gets me to 315 km/h (on the road) very easily.
Thank you very much. I have the R1, but the PCX is my favorite for many reasons.
@@MBPATENTS Thank for your reply. I understand as my big bike is very easy to drive in USA, but I purchased a PCX150 for my 2nd home in Thailand where the PCX is absolutely the perfect transportation! Great video and excellent machining skill.(please wear gloves next time you are grinding metal!)
Well theres teenagers like me that on the paperwork it says all stock and can drive in thailand only 150 cc so i make some tune to have fun thats all meanwhile in my homecountry in italy i drive a 125 cc honda sh
Stupid comment
Yeah, but the key to this is MPH and milage for some of us. I'm looking for a 200mile a day commuter that gets close to 100mph and could be easily modified to do 75mph. This seems the closest fit, and it's around 4k in price. I'm impressed.
Nice one
Thank you 😊
pantastic.
114k km - Nice :D
Thanks Pavel!!!
Wla b after market yn? Maproseso.
Very nice work man. I would like to ask you something. I have a honda x8rx 2001 model. 36000km. The reason that I went to mechanic was that i was having a problem turning off as i was driving. I changed piston and after 400km i have the same problem. Only if i leave it cool will start and go again. Thanks again
Hi bro this damage will never come from the piston, the engine shuts off when you started it only comes from the current three points you need to check the multiplier where the wire goes to the spark plug second the wires of the switch that puts the key and third is some wire that doesn't make good contact it can also come from coils. If you look at the coil, if it is correct and the coil, when you remove the flywheel, clean it very well because the machine is old.
tell me when you accelerate the engine and it reaches three to four thousand revolutions there it shuts off and starts again???
I had the same problem on an XT 600
@@MBPATENTS Good morning the problem is appeared when i accelerate. If i leave the moto for one hour it turn on again.. my mind was that it will be wire (electrical or fuel) ⛽ problem.
@@MBPATENTS thanks a lot for your anser
wow... 138 kms/h sem sair do lugar!
Why did you file the part of the cylinder channels close to the hub? What is the purpose of this? I understand the outer parts. To move the belt higher. Thank you.
Hi Alisian Yes, you said it correctly, in order for the belt to arrive thinner for 10 km more, also the 3 grooves that are machined near the axis are for the 21mm balls to enter, so it is equal to the 20mm balls, the banner part, so at the end the 21mm balls work more therefore 9 km more than before!
@@MBPATENTS For valuable information for you. Finally. I have a Dayang Vorei 150 cc motorcycle. And it has the same dimensions as the PCX variator. The ball dimensions are 20x15 13 grams. What will be the result if I apply the rasping process you did and use a 21x15 13 gr ball?
@@MBPATENTS First of all, my friend, I enjoy watching your videos. I have a 150 cc dayang vorei. I lengthened the baga channels a little and took 0.5 mm from the front pulleys. The original luggage of my motorcycle is 13 gr. While it was seeing 130 km on the center stand before, it saw 160 km after these operations. However, it does not go above 110 km while driving. If I increase the baggage weight to 16 grams, will the top speed increase? Or what should I do? thank you in advance
Καλησπέρα έχω το PCX 150 2016 φοράει φίλτρο DNA και Μπίλιες Techpulley 15GR αλλά η τελική μου είναι 110km/h μόλις τα φτάσω το μηχανάκι κόβει σαν να σταματάει η αντλία επαναλαμβανόμενα δεν με αφήνει να τα ξεπεράσω ενώ το μηχανάκι έχει τη δυνατότητα.
Το TPS το άλλαξα αλλά δεν βρίσκω άκρη.
80kmh con peso y viento
If bigger roller and heavier means more speed? To fit the bigger roller means you have to make the roller housing more bigger right?
Hi ThePembet oh bigger cylinder opens up the variantor a bit more as far as the biggest up to a millimeter bigger but for this to work you have to remove it i will thank you very much for your attention
It has absolutely nothing to do with 138 km. If someone goes on the road and gets on it and does 138 "on the straight road", it means it's doing 138.
There is such a thing as wind. There is such a thing as rubbing against the ground. That motorcycle can 120 km maybe barely do it.
the PCX up to 150 runs fine right now as we speak mine goes up to 155 after 150 there is the problem Thanks!!
Good mechanic. This pcx have brake disc rear??
Thank you very much! No it doesn't have, I made a patent to put it there!!
PCX/ADV/SH 150cc always have 2 versions with or without rear disk brakes - normally Indonesia version will surely have 2 disk brakes
To iste mi da aj moja honda pcx s variatorom športovim.Ale s jednou podmienkou sadni si na tom a prejdi sa či ti da 140 km za hodinu neda lebo mne da najviac 112 km za hodinu,su tat totiž faktory,odpor vzduchu,plexištit,vaha človeka atd.
You have to send me one
🤔
So what was the name of the parts you bought an what website ? I really wanna do this upgrade on my 2018 Honda pcx 150. Short story had a tire blow out took it to a shop they removed the muffler changed the tire an now it barely breaks 60mph when it was doing 75mph before 4!I took it in. Greatly appreciate the names of parts an the website
Hi Gordon you have Ebay, Amazon, Alibaba, they all have everything, a plug and a dimmer.
Did they properly replace the exhaust gasket? It may have an exhaust leak, which could affect the O2/Evap, or just anything else in general by the decrease of back compression. These new systems are sensitive, and if one of the sensors is getting a bad reading, it may change a lot in how the engine runs.
will this provide any gain on a 2019 or 2020 model, the gears a much longer on the 19-21 years, I plan on getting a set of 2013 or similar gears for my 2020, but would this work with stock gears?
Πολύ σωστός έχω δει κ αλλά βιντεο ς. Είσαι Αθήνα; Έχω ένα ίδιο
Ναι Αθήνα είμαι είναι αυτό για να το κάνεις
m.ua-cam.com/video/H1o8aWGsuzE/v-deo.html εδώ πιο απλό
Malossi or Polini ?
factory the best there is
I have GY6 engine 2021 brand new 125 cc scooter.It has 8.6 HP.Does changing to heavier rollers make better fuel consumption also speed? I do not know what is the roller weight of it actually?
Take a look here
m.ua-cam.com/video/n4wxvyvuJ_E/v-deo.html
@@MBPATENTS Yes I saw it.But what grams are 125cc scooter's rollers? I want to buy a little bit heavier Dr Pulley sliders.The engine now has 520 kms on clock.
@@ditiks4638 hi my UK 2018 model 125cc AJS modena has 15 gm standard I get aprox 80 miles to the tank with about half a lt still in tank. My tiny tank only holds 4.7 lts
Location u Po Sir?
Can this be done in the uk?
Hi Levente Yes comfortably!
hi! the overheating indicator does not work, what should I do? the button on the speedometer panel does not work, what should I do?
Hi! Watch the cable that goes to the valve because in the union there must be a problem. Now about the button, which button do you mean?
@@MBPATENTS switch button ODO or TRIP
Tamammm
roller brp gram ?
16g
Hoi hoeveel km winst heb je nu ?
I think it shows how much money he has earned😉
depois ...quando for a subir....vai a 20...kmh
I really can't understand you but to me yes I think they are all questions
113543 km??? :O :O
I have honda pcx125 brand new max speed is 76mph i would like to fast it how?
Hi Abbasi m.ua-cam.com/video/H1o8aWGsuzE/v-deo.html Take these steps to reach 130 km
Whatever else you need I am here to help you!!
do u have honda adv 150? :) willing to order for PH
no i do not have an ADV 150 from what i know they have the same varitor.
Shall you do that to my pcx abang ?
Yes😎
@@MBPATENTS ohh thanks a lot ı will find you when I came back to Malaysia
hellooo bossku what is the roller weight?
Hi allskooguu I write them down in the description in the video 3, Ballias, 24 G and 3 apple trees 16 G.
Φίλε Αθήνα βρίσκεσαι?
Ναι
Hi!👍👏👏👉👊
Hi!!!🤩
Οταν έφαγες το βαριατερ, άλλαξες και ιμάντα?
+Ανδρεασ οχι Ανδρέα δεν άλλαξα.
καλησπερα φιλε μου,εχω το ιδιο pcx με σενα με 77000 χλμ και ειμαι πολυ ευχαριστημενος...φοραω φιλτρο dna και dr.pulley 14gr....τσουλαει σχετικα καλα...απλα επειδη τωρα πλεον λογω δουλειας βγαινω σε ανοικτους δρομους εχεις να προτινεις κατι αλλο οσο αναφορα μπιλιες η οτιδηποτε αλλο ωστε να μπορω να κραταω τα 100 χλμ π.χ με ποιο χαμηλες στροφες και να πηγαινει ποιο ανετα?σε ευχαριστω
Taso η θα κάνεις αυτό m.ua-cam.com/video/H1o8aWGsuzE/v-deo.html η παρε ενα βαριατορ ντρ πολινι 9μπιλο να φτάσει μέχρι 130χλμ
Fb έχω δες τής πληροφορίες το σύνδεσμο
Sucks when people aren’t talking on their videos
He would just be speaking some mess of phillipino and English with a lot of goofy sound effects. We are lucky that he isn't saying anything.
I'm really not impressed with the machining that he's doing. It's not accurate enough, there will be lots of vibration from the run out of the parts at high speed.
Where location workshop budy ?
Hi yu I'm in greece.
😍😍😍
Αμα θέλω να προβω σε βελτίωση του βαριατορ, μπορείς να το αναλάβεις εσύ ; Έχεις κάποιο συνεργείο ;
Εγώ ασχολούμαι μόνος μου δεν έχω κάποιο συνεργείο. Μπορώ να στο φτιάξω.
@@MBPATENTS Α πολύ ωραία,σε ευχαριστώ. Δυστυχώς ακομα έχω εγγύηση στο μηχανάκι και νομίζω πως η μετατροπή του βαριατορ την παρακάμπτει.
Σωστά έχεις δίκιο η μετατροπή στο βαριατόρ δεν θα ισχύει η εγγύηση.
Too risky the belt Is about to come out of the variator
Hi riadhch in the last thing I fear it just about lasts longer and gets more kilometers this way!!
Debriyaj bakımını yaptı yarım kilo baga taktı o hızı yapması normal kalkışta hızı zayıf olur
Orta sehbada benim 50 lik motorda görür 140ı
weight 20 or 21mm? how much g? 11.5 or 14g?
Hi Hicham Bagli In this video I have 23g I do not recommend it or the best choice is 12 g the original is 16 g with 12 the pcx will become a little more nervous!!!
My PCX drives 150 KM
Hi jedad que modelo tienes?
@@MBPATENTS I was joking, its not so fast.
Desse jeito 138 sem andar com a escuter
Hi Ageilson Sim, está no ar apenas alcança até 135km.
φιλε εχω το pcx 150 και εχει κοφτη στα 112χλμ.αμα τον βγαλω θα κανει κακο στο μηχανακι?.Και ποσα χιλιομετρα θα πιανει μετα?
Δεν πιστεύω να πάθει κάτι μέχρι 1000-1200 στροφές, ανάλογα κ ο προγραμματιστής παίζει μεγάλο ρόλο τι μίγμα θα σ' φτιάξει. Χλμ δεν το ξέρω τι θα σου βγάλει. Ένας φίλος μου έβαλε εκκεντροφόρο κ προγράμματα έβγαλε 130χλμ κ ξεκολλάει καλά.
Γεια σου φίλε μου
Έχω ένα sh150i του 2009
Επειδή το θέλω για εργασία, κάνω 100χμ την ημέρα, τι σετ προτείνεις για να δουλεύει χαμηλές στροφές στην περιοχή των 0-40χμ/Ω
Ένας φίλος σε sh300i έβαλε φουλ σετ mallosi με 15.5γρ μπίλιες και το μηχανάκι δουλεύει πιο χαμηλές στροφές, μπορείς να κατεβαίνεις λεωφόρους με 60-80 στην κίνηση και το μηχανάκι είναι ρελαντί
Βέβαια αυτό είναι 300 και έχει τρελή ροπή, αλλά μου την σπάει που το 150 ανεβάζει λες και είναι 50
Έχω το μαμά variator και όλα τα ελατήρια mallosi που είχα βάλει τα έβγαλα και έβαλα πάλι τα μαμά
Από εργοστάσιο φοράει 12.25γρ μπίλιες και έχω δοκιμάσει από 10 μέχρι 13, τώρα έχω τις 13 και το μηχανάκι στα 90-100 δεν είναι ανεβασμένο όπως πριν, όμως αυτό που με ενδιαφέρει είναι η περιοχή 0-40 που τώρα ανεβάζει πολλές στροφές, μην φανταστείς όπως όταν είχα βάλει 10γρ μπίλιες, αλλά και πάλι θέλω πιο λίγο
Μήπως φταίνε τα λευκά ελατηριακια mallosi που έχω αφήσει πάνω στον φυγοκεντρικό;
100% είναι το ελατήριο το μαμα ελατήριο είναι πολύ καλιτερο
@@MBPATENTSmom???
Θέλω να κάνω τον υπολογιστή μου να λειτουργεί έτσι πού μπορώ να το κάνω
Έναν καλό επεξεργαστή θέλεις!
το 125 ειναι η το 150 ?
To 150
140 km 138 km ?🤔
138 km for you🤣🤣
Sapa buat ni? Terbaik 👍👍
gps 110 km/h lol
@@nelsonfernandes709 ???
Hi.. i do on the my pcx your jobs. But i test road drive max 110km. Why do it?
Yolda 140 gidmez😂
🤣🤣🤣Küçük olduğunuza inanıyorum o yüzden bunları söylüyorsunuz pcx eğlence için 173 km'ye ulaştı, şimdi rüzgarsız düz bir çizgide 142 km'ye ulaşıyor!!! 😉😅🎄Mutlu Noeller
Ну это без нагрузки
But it is thank you!!!
В реале он ъотябы с горы так разгонится?
Yes
💯🚀🔥🛵🏁✊
А потом мотор крякнет
то, что вы говорите, неправда.Это просто заставляет двигатель работать более плавно и продлевает срок службы.
его обороты увеличиваются, двигатель работает на износ...@@MBPATENTS
acheté un malossi variospeed tu t'emmerde moins tu abîmés pas l'origine
Hi Vincent Pourquoi l'acheter alors que j'ai mieux de me dire une raison pour laquelle mettre malossi
Не всех дурных война забрала)))
Забудь тебя первым😄
😂 standar 2
Колхоз жуткий)))
False
Бред полнейший😂
что ты знаешь, что это за новая история с лисой🤣🤣🤣
👍💪💪