Sehr interessantes Video, die Glasinstandsetzung vom Display hat mich sehr beeindruckt. Die Art und Weise des Verklebens hat mich echt geschockt, die Reste des alten Klebers bleiben auf den Teilen drauf, der Flüssigkleber kommt dann einfach dazwischen, oh mein Gott, was für ein Pfusch! Außerdem sollte das Display nicht nur am Rand verklebt sein, sondern auch in der Mitte, so wird es mittig immer nachgeben und klappern!
May I ask why after the new glass were attached after laminating and bubble remover machine, there were still a visible markings on top of lcd (markings were visible when you move the finished re-glassed lcd under light, tipping it sideways and up/down). You can see mostly is the fingerprint area (square marks) and mostly at the bottom part, opposite of the flex cable (crumpled marks). Is there any way to prevent this? hope you can help because this is an issue on us, thanks
Great but the black glue you applied for the back glass was kinda mediocre, there was even a corner with almost no glue, customer would probable be able to stick the nail in that corner
You were unable to maintain the factory layout for the screen adhesive, which means this device is now 0% water resistant. This is something you could easily do with liquid adhesives and double sided adhesive as well. I hope the customer did not have to pay much for this.
It is so well and professionally done that I enjoy watching it several times👍👍👍👍
Thank you so much 😀
Very excellent and perfect. Thank you for your good training
👌👌👌👌👌👌👌
Thank you too!
Very informative, excellent, excellent👏👏👏👏👏👏
Thanks bro🌹
Great explanation Dude 💓
Thanks a lot bro🌹🌹🌹🌹🙏🏻🙏🏻🙏🏻🙏🏻
Sehr interessantes Video, die Glasinstandsetzung vom Display hat mich sehr beeindruckt.
Die Art und Weise des Verklebens hat mich echt geschockt, die Reste des alten Klebers bleiben auf den Teilen drauf, der Flüssigkleber kommt dann einfach dazwischen, oh mein Gott, was für ein Pfusch!
Außerdem sollte das Display nicht nur am Rand verklebt sein, sondern auch in der Mitte, so wird es mittig immer nachgeben und klappern!
Thanks 🌹🌹🌹
Very skillfull repair that must be tough to execute.
🌹
This is called hard job !
Yes, sure 🌹🌹
Perfect 👌👌👌👌👌
Thank you! Cheers!
Good work
Thanks 🙏🏻
I'm sorry I can't give you one like. Good job
🌹🌹🌹🌹
Clean work
Thanks bro 🌹🌹🌹🌹🌹
May I ask why after the new glass were attached after laminating and bubble remover machine, there were still a visible markings on top of lcd (markings were visible when you move the finished re-glassed lcd under light, tipping it sideways and up/down). You can see mostly is the fingerprint area (square marks) and mostly at the bottom part, opposite of the flex cable (crumpled marks). Is there any way to prevent this? hope you can help because this is an issue on us, thanks
These residual wave modes are related to polarization and can't be done unless you use YMJ molds It may reduce.
Great but the black glue you applied for the back glass was kinda mediocre, there was even a corner with almost no glue, customer would probable be able to stick the nail in that corner
No, there will be no problem
Are u testing the air seal too like the rewa technology did?
When the screen is replaced, it will be out of waterproof mode🌹
@@CellFixGeorgiaciò significa che a contatto con l'acqua si danneggierebbe?
😎😎😎😎😎
🌹🌹🌹🌹
Please which type of glue needle Use? I mean Black paste needle
Please watch the video until the end🌹🙏🏻
How much for the s24 ultra screen I want to repair my fone here with a new screen and I charged 1200fjd in Suva
In which country do you live?
Iphone glass replacement videos upload bro quickly bro plz plz plz bro
Enter the channel, we have iPhone glass replacement videos there🌹
Price for this service
Due to price changes, the price will not be listed here🌹🌹
Can I use wire 0.02mm?
Yes
@@CellFixGeorgia thank you sir👏😀
Bro edge glass replacement videos upload plz bro
Enter the channel, we have iPhone glass replacement videos there🌹
Why you not laminating with middle frame?
If laminated with a frame, it creates a wave on the screen
You were unable to maintain the factory layout for the screen adhesive, which means this device is now 0% water resistant. This is something you could easily do with liquid adhesives and double sided adhesive as well.
I hope the customer did not have to pay much for this.
Thank you for your attention .
Is this one s24 ultra. Looks like s23 ultra
🌹🌹🌹🌹🙏🏻
This model is S23ultra
U also need some traning first
Thank you very much for the reminder🌹🙏🏻
This is not S24 u
Mentioned in the full video🌹
This is not s24
All steps are exactly the same as s 24 ultra,It is fully mentioned at the beginning of the video🌹🙏🏻
Original samsung screen?
Yes🌹
@@CellFixGeorgia nice not many repairs done Whit samsung original screen often 3rd party screens