You would need to purchase and install the optional BBA (Balboa Bluetooth Audio) module than follow the instructions for that device. ua-cam.com/video/jgBqkh8KyTs/v-deo.html
No need to program if longer filter cycle is not needed, Filter cycle can be changed from the factory default of 1 - 2 hour cycle every 24 hours for the Balboa BP series for heavy use spas that need more filtration. If you turn the jets on they will only run for 15-20 minutes because they are on a timer. For filtration the pump comes on as programmed and runs the length on the programmed filter cycle.
@@Poolandhottubdepot Did not know. What if I tried to set a different time? Is it possible to revert the entire program back? Thank you very much for this information!
@@viktorius5568 You can change the filtration cycle start time and duration if you like but there is not a reset set button to change it back, you would have to go into the setting and change it back. What topside control panel do you have?
www.poolandhottubdepot.com/balboa-tp600-6-button-topside-with-overlay-55673/. see "menu guide link " in the bottom of description than look at page 10 it has all the settings for adjusting filtration.
There are a lot of nozzles in SPA pools. Have you ever had cases when one of the nozzles passes water through the seal. What to do, how to determine which one and how to troubleshoot?
@@viktorius5568 You would need to investigate, the leak could be coming from a jet body gasket, pump seal, heater gaskets, water backing up into the air valve(s) or a plumbing joint.
Yes, it's understandable that somewhere passes, for two months, 100-150 liters of water. Noah can't find it. Is there any way to seal it with silicone?
These hot tubs are a PAIN in the ASS
How do you set up bluetooth on this model?
You would need to purchase and install the optional BBA (Balboa Bluetooth Audio) module than follow the instructions for that device. ua-cam.com/video/jgBqkh8KyTs/v-deo.html
Francaise
Only English at this time.
Why do you need to program? What if I just turn it on and turn it off after two hours? There is a possibility?
No need to program if longer filter cycle is not needed, Filter cycle can be changed from the factory default of 1 - 2 hour cycle every 24 hours for the Balboa BP series for heavy use spas that need more filtration. If you turn the jets on they will only run for 15-20 minutes because they are on a timer. For filtration the pump comes on as programmed and runs the length on the programmed filter cycle.
@@Poolandhottubdepot Did not know. What if I tried to set a different time? Is it possible to revert the entire program back? Thank you very much for this information!
@@viktorius5568 You can change the filtration cycle start time and duration if you like but there is not a reset set button to change it back, you would have to go into the setting and change it back. What topside control panel do you have?
@@Poolandhottubdepot Exactly the same as in your video.
www.poolandhottubdepot.com/balboa-tp600-6-button-topside-with-overlay-55673/. see "menu guide link " in the bottom of description than look at page 10 it has all the settings for adjusting filtration.
There are a lot of nozzles in SPA pools. Have you ever had cases when one of the nozzles passes water through the seal. What to do, how to determine which one and how to troubleshoot?
Are you referring to a leaking jet in a hot tub?
@@Poolandhottubdepot No outside, there is a puddle under the SPA and the water has become noticeably less. My pool has 47 jets!
@@viktorius5568 You would need to investigate, the leak could be coming from a jet body gasket, pump seal, heater gaskets, water backing up into the air valve(s) or a plumbing joint.
Yes, it's understandable that somewhere passes, for two months, 100-150 liters of water. Noah can't find it. Is there any way to seal it with silicone?
@@Poolandhottubdepot
I’m so happy 😃 happy 😊😊😊😊
Das Video hat nicht geholfen, Danke für nichts