Van, I can't begin to tell you how much I have learned from your videos. I have done so many mods on my bike just because of the quality of these installation videos. I just wanted to stop by and tell you thank you for the hard work you put in to these videos.
Vortex Racing finally restocked the TL128 Smoke today. They have had the clear but, I have been waiting for a few weeks for the smoke. Hurry to order yours. They received 30 total. Thanks for showing the install Brian. Ill be doing mine this weekend.
Brian, thanks for the great video! Very informative. I was able to replace my rear LED taillight + turn signals using the same kit you did. Worked great with my 2015 GSXR 600.
I have a Suzuki m109 and your video was very helpful my only question is my brake light now stays on after installing the integrated tail light I followed your instructions 100%
Very professional and clean job Brian! I just got an LED for my 07 gsxr this week, problem is running light works but BRAKE light function does not turn on.. do i need to use a transistor on it? keep up the great videos!!!!
Hey my running lights are not working after installing an Integrated LED tail light, any ideas? They either have the brake light always on and when brake is applied they don't get brighter, or the running lights don't stay on,, but when the brake is applied the brake lights come on, need help. thanks
van, the lights on the side ( turn signals) that have that fake carbon fiber piece on them.. for some reason my fake carbon part keeps popping off.. how can I fix this thanks
your a very good engineer, the only small criticism i had is using electrical tape id have heat shrunk over the top of the cut shield, but that's me. very nice job though, very nice clean workshop, always a good sign. im about to fit one of these lights on my K3 1000, so for me it was very informative and for that i thank you out of interest, did you come off a bike just before you shot the video ? you've got some gravel rash on your right arm ?
+Loonboy123 Thanks for the kind words. Heat shrink would be a very good call in this situation, just didn't have any handy. Probably a good way to keep things even cleaner. I did not just come off the bike... Unfortunately.. haha this was a giveaway bike we did last year so I try to not put an insane amount of miles on the moto. Thanks again for watching!
What happens to the indicator (Turn signal) when you brake when signalling? Also, what about the hazard lights when the tail light is on? Cool video by the way.
I’ve been following your vids for quite a bit and they’re very informative. However, I don’t see many demos on gsxr 1000. I have a 2016 gsxr that I’m trying to disassemble the right tail fairing and it is really a pain in the brain to the point where my bike is stripped apart and still can get it out. Can you show a demo video on how to disassemble it or at least guide me on where to find descriptive source? Thank you
hey really like the video, good audio and camera angles. Just a question about those indicator lights. Is it possible to fit LED light bulbs in the stock indicator fitting's as well?
+Sportbike Track Gear for your information,asked a dealership here in Amsterdam and he said that you would need some sort of ballast to keep it from flashing ridiculously fast. you can see the led indicator speed go up in your own video when you released the normal bulb indicator from the vortex unit. the vortex went quit a bit faster when it worked without that bulb next to it.
So every time I see these videos something is back stock on the bike. You have the exhaust back on and the fender hugger removed. Do you put it back to stock after every time or do you just record the videos in a different order then when they are shown on here?
Hey STG. Recently made some big purchases for my 07 GSX-R. I was thinking I would pick up a Rumble Concepts LED tail light as well. I assume the install is nigh identical to this video? Awesome video btw guys.
well I replaced my rear brake light with a new blinker integrated tail light and I only get a left and a right blinker wire... what do I do with the ground coming from the blinker and why isn't my resister stopping the hyper flash?
For more specific installation information you can feel free to shoot us an email at "Orders@sportbiketrackgear.com" or give us a call at 888.784.4327!
Other then using the bike as a work bench and setting parts on the floor He did okay Also don’t make the you did I’m doing both at the same time Make my life a whole lot easier but at the end of the day we’re not launching rocket ships 🤦🏻
Man you have stuff plastered all over the place. It’s killing my ocd and setting the 3 Phillips on the battery You asking to spend 30 Minutes trying to find it once it drops down
I don't like it. The profile is smaller even if the light is brighter, and the incandescent bulbs blinking alongside the LED blinkers looks weird. Good how-to video though, for people who want to do this.
This bike is not the best example of the end result you can get with a led tail light because of the OEM signals on the tail. Take any other bike with a traditional set of rear signals and it will look amazing. - Van
I have been debating this mod and had the same thought as you about the stock indicators. Think I'm gonna do it but vinyl wrap the stock indicators in a matte black
8 years and still helping the game !!!!
No place I would rather be. Thanks for watching! - Van
Van, I can't begin to tell you how much I have learned from your videos. I have done so many mods on my bike just because of the quality of these installation videos. I just wanted to stop by and tell you thank you for the hard work you put in to these videos.
BadShadd1 We really appreciate that and I am glad we were able to help! Thank you for watching and all of the support. ~Aubrey
Vortex Racing finally restocked the TL128 Smoke today. They have had the clear but, I have been waiting for a few weeks for the smoke. Hurry to order yours. They received 30 total. Thanks for showing the install Brian. Ill be doing mine this weekend.
You guys are legends. I needed help to change my tail lights and this Viedo was such a big help. Thank You!
You are welcome and thank you for watching! - Van
Sweet! I'm thinking of getting a 2016 GSXR 750 and these videos are going to come in handy.
+Mr223wssm We try to do as many as we can!
Brian, thanks for the great video! Very informative. I was able to replace my rear LED taillight + turn signals using the same kit you did. Worked great with my 2015 GSXR 600.
I have a Suzuki m109 and your video was very helpful my only question is my brake light now stays on after installing the integrated tail light I followed your instructions 100%
The should include the turn signals with the kit so it matches up
Ive been using JST connectors for anything like that I do, so they can be quickly disconnected if needed and aren't permanent.
That will get you a good clean result for sure. - Van
At 6:04 you are pulling the right tail side off and you disconnect the right blinker, does anyone know what that extra electric plug is for?
Sorry, I do not know what that connector is for. - Van
It’s the plate light connection I guess I finally figured it out. Thank for the response
@SportbikeTrackGear how do you call that plastic that's holding the blinkers on the side? Can't seem to find anything for my Suzuki GSXR 600 2013...
That is the OEM tail section. Go to any OEM online parts site and you can find the OEM name and part number for these pieces. - Van
very helpful thanks for the info. had no clue it had led turn light into it.
:0)
Just did the job on my k3 yesterday, the same nice neat installation with heat shrink 😜
Thanks again and ride safe bud
Very professional and clean job Brian! I just got an LED for my 07 gsxr this week, problem is running light works but BRAKE light function does not turn on.. do i need to use a transistor on it? keep up the great videos!!!!
Hey my running lights are not working after installing an Integrated LED tail light, any ideas? They either have the brake light always on and when brake is applied they don't get brighter, or the running lights don't stay on,, but when the brake is applied the brake lights come on, need help. thanks
Hey bro how do I get that rear fairing for the gsxr 600
Ebay is an excellent resource for used parts. - Van
van, the lights on the side ( turn signals) that have that fake carbon fiber piece on them.. for some reason my fake carbon part keeps popping off.. how can I fix this
thanks
I need to know the color wire that is the main wires on both rear turn signals
I assume this turn signal integration has a built in resister?
No the OEM turn signal bulbs are still being used so the load has not been reduced. - Van
Thanks I did this to my 750 wonderful look I did it the same way
your a very good engineer, the only small criticism i had is using electrical tape
id have heat shrunk over the top of the cut shield, but that's me.
very nice job though, very nice clean workshop, always a good sign.
im about to fit one of these lights on my K3 1000, so for me it was very informative and for that i thank you
out of interest, did you come off a bike just before you shot the video ?
you've got some gravel rash on your right arm ?
+Loonboy123 Thanks for the kind words. Heat shrink would be a very good call in this situation, just didn't have any handy. Probably a good way to keep things even cleaner.
I did not just come off the bike... Unfortunately.. haha this was a giveaway bike we did last year so I try to not put an insane amount of miles on the moto. Thanks again for watching!
What happens to the indicator (Turn signal) when you brake when signalling? Also, what about the hazard lights when the tail light is on?
Cool video by the way.
Thanks! The brake light is brighter than the turn signal.
this tail light works with GSXR750.?
Yes this will work with the 750 as well. - Van
Nice video. How do you enter with the bike?
Sorry the bike was given away a few years ago. - Van
do u happen to have a video of the clear tail light. I want to c how bright or not. different from smoke 1.
Unfortunately we do not have a video of the clear taillight. Thanks for watching!
Where could you pick one of these up in the uk ?
You would need to look for a shop that carries Vortex in the UK. Sorry, do not know who does. - Van
I’ve been following your vids for quite a bit and they’re very informative. However, I don’t see many demos on gsxr 1000. I have a 2016 gsxr that I’m trying to disassemble the right tail fairing and it is really a pain in the brain to the point where my bike is stripped apart and still can get it out. Can you show a demo video on how to disassemble it or at least guide me on where to find descriptive source?
Thank you
We are hoping to do a 2018 GSXR 1000 for our next project bike. - Van
There’s a lot of end of the day talk!!! Very informative nonetheless
hey really like the video, good audio and camera angles. Just a question about those indicator lights. Is it possible to fit LED light bulbs in the stock indicator fitting's as well?
+depenisvanjezus Probably, but it would take a good amount of custom work. Thanks for watching and the kind words!
+Sportbike Track Gear for your information,asked a dealership here in Amsterdam and he said that you would need some sort of ballast to keep it from flashing ridiculously fast. you can see the led indicator speed go up in your own video when you released the normal bulb indicator from the vortex unit. the vortex went quit a bit faster when it worked without that bulb next to it.
Clean job! Keep up these videos you're awesome man 👍🏽👍🏽
Thanks! We try really hard to make some good stuff for our customers!
So every time I see these videos something is back stock on the bike. You have the exhaust back on and the fender hugger removed. Do you put it back to stock after every time or do you just record the videos in a different order then when they are shown on here?
Justin Reynolds There are times we will put the bike back to stock trim for the next install. It depends on what the item we are installing is. - Van
Hey STG. Recently made some big purchases for my 07 GSX-R. I was thinking I would pick up a Rumble Concepts LED tail light as well. I assume the install is nigh identical to this video? Awesome video btw guys.
Thanks! Yeah the install will be pretty much the same. But it will also come with some individual instructions you can reference as well!
well I replaced my rear brake light with a new blinker integrated tail light and I only get a left and a right blinker wire... what do I do with the ground coming from the blinker and why isn't my resister stopping the hyper flash?
For more specific installation information you can feel free to shoot us an email at "Orders@sportbiketrackgear.com" or give us a call at 888.784.4327!
Hey Brian. Great install. Thanks. What is the brand of the passenger foot rests installed on the bike? -Curtis
+curtis johnson Those are actually stock parts!
The Lights fitted in the Video are these the smoked or clear? just want to make sure I order the same
TheRevokeProject That is the smoke lens. - Van
The tail looks so much better without the indicator part. Would be good if you could remove that Part and just use the new light for the indicators.
I do not think I have seen a kit that does that. - Van
how do l order to au can u help
Other then using the bike as a work bench and setting parts on the floor He did okay
Also don’t make the you did I’m doing both at the same time Make my life a whole lot easier but at the end of the day we’re not launching rocket ships 🤦🏻
Thanks for watching! - Van
Man you have stuff plastered all over the place. It’s killing my ocd and setting the 3 Phillips on the battery You asking to spend 30 Minutes trying to find it once it drops down
I can help you fix your bike but the OCD is outside of my skill set. - Van
Red looks better. U should have gone all smoked including indicators
That would look cool for sure. - Van
I don't like it. The profile is smaller even if the light is brighter, and the incandescent bulbs blinking alongside the LED blinkers looks weird. Good how-to video though, for people who want to do this.
This bike is not the best example of the end result you can get with a led tail light because of the OEM signals on the tail. Take any other bike with a traditional set of rear signals and it will look amazing. - Van
I have been debating this mod and had the same thought as you about the stock indicators. Think I'm gonna do it but vinyl wrap the stock indicators in a matte black