VCX-se best J2534 VCI in the Scan-Programming category.This VCI saves you a lot of Money.Take a look
Вставка
- Опубліковано 19 лис 2022
- This VCI helps you save a lot of money.
It is an original product that receives online Firmware updates quite often.
It can replace many other products in its category!
This video is intended to help you avoid spending money on things that don't work as they should.
It is for educational purposes for beginners who deal with car scanning and coding. I mention that I don't want to influence anyone, it's just my opinion!!!
Link :
www.vxdiagshop.com
Greetings from Dominican Republic, thanks for always shows the truth of almost interfaces, what do and what don't.
Thanks for watching.
Hahaha I was laughing when you said you had a sickness for these tools and cannot stop from buying them! I feel the same sickness has begun with me! But, I have learned from you and will choose wisely! Thank you for sharing!!
I'm glad you learn from other people's mistakes, it costs you less. I'm also glad that the video is useful to you.
Thanks for the kindness show to us on these devices,vcx can do ECU clone as well
👍
Hi mate. Thanks for your very good advice. I'm watching you from Mozambique
Welcome to this community 👍
Thatnks for the video! hen you say programming via VCX do you do it as a stand alone or do you need to go to the manufacturers data via internet. Like Topix for JLR.
I have been using vcx for 5 years and they very good never let me down
👍
Edc 17c54 cp20?
Great video and info!! I need to reprogram a new computer to my 2007 Honda Civic which one of these do I need? Thank you
I love you the way you explain
Hello,
thank you, my english is not so good, I will try to make myself more understandable :).
Thanks for the comment.
@@YOYODiagnostic No worries your english is just fine.
Super good video helps a lot 🤝
Thanks for watching 👍
I have all you show including icom autel im508 Bosch kts and so on... Started with Delphi at the begining unfortunately there was not good peoples like you to explain and some of us had to learn hard way :D
Hello.
I'm sorry I didn't make videos 12 years ago, I was helping you save money. And I can add a lot of other diagnostics and programmers including the ones you mentioned.
We all have this virus in us :))
@@YOYODiagnostic yes I appreciate what you doing I just was saying some of us did mistake by buying programmers we don't need because we didn't have knowledge :) I'm happy I found your channel I'm sure there are many things I can learn from you :)
Wieder mal sehr interessant und viel gelernt so eine ähnliche Sammlung habe ich auch
Vielen Dank!
Thank you for the video
👍
Thankyou so much for your Work.
Very good. I Had See this so many Times but i dont know about the benefits.
I have Show this Chanel to my Friends.
So you get more Likes.
Thanks for your support. I really appreciate. 🤗
Excellent video
👍
Are you reading my mind? I am looking for a good J2534 VCI, so this video came just in time.
Hello,
I'm glad I could help you !
@@YOYODiagnostic You are always helping me with your videos. Thank you for taking the time to make and post them.
@@HelgiThorisson you welcome 🤗
how is possible for this unit to write if the FEPS is 18 v and the car use 12 v(2006 for escape)
Man I swear u the best. Buy always u fuck up my day hahaha. Cuz I buy pcmtuner for 260 euro . And I saw ur video so I get pm2 pro for 62 euro and the same job. Thank u
👍
Hi brother thank you for the advice
Please tell me why is the pcm tuner are bad tool is it damge the ecus ? Or an other reason ?
Hello.
because it has a connection problem.It has problems when you read on bench, it is often not recognized by the programming, I have a video posted some time ago where you can see this problem live.
You noticed in the video this is also a Scanmatik clone that I got from a friend to repair. I've run tests with it on a few ECUs and it's never had a connection problem. It is much superior to this PCMtuner and is 200 euros, so 400 euros cheaper than this one.
Can it really replace Can CLIP? J2534 with can Clip only works with can bus cars (2006 and above). On old cars it need dos version of can clip which works different.
I just picked up a VXDIAG VCX SE 11 brands version with 2TB SSD
I am wondering if anyone has experience in using the VCX SE with ECU flashing utilities such as romraider and ecuflash do these program work with VXDIAG VCX SE?
first of all I want to say that this is the first video and the best of best describing obd2 j2534 never seen in UA-cam and internet.
for me as beginner in this domain; I was confused between vcx se and scanmatik2
I was inclined towards sm2 because you will have pcm flash as plus for reading and writing ecu's.
I think vcx se and tactrix is good combination for work.. Or you suggest anything else?
And another question :did you ordered vcx SE with hard driver or just the interface?
Does it require annual activation for programs ?
In the end, I would like to say thank you for the information, time and effort to make this video. I apologize for the bad language because I am not English. I'm sure it's the longest comment I've written in my life for the best video I've seen so far.
From Algeria 🎩
Hello,
I appreciate your comment and I'm glad that I was able to be of use to you.
I'm going to explain the difference between Scanmatik and VCX.
Used for Tuning by reading OBD both give the same performance, but VCX cannot be used for reading Boot or Bench. I recommend buying the original Scanmatik for Tuning ,if you are going to read Boot or Bench, if you want to install different programs for diagnosis, VCX is clearly superior because its drivers can emulate any of those original testers used for diagnosis.
It has licenses valid for 10 years from the moment you buy it, you don't pay anything annually and you can update the Firmware and licenses for free.
@@YOYODiagnostic ALL MY BEST WISHES. HAVE GOOD DAY
@@YOYODiagnostic We take both your recommendations and your advice very seriously. Please make a video comparing the PCM tuner to the SM2PRO 12534 VCI and determining whether they are functionally equivalent or a waste of money.
@@ibra29 👍
Bro, can you please share the link or the full name of exactly wich VCX you shared in this video, I went through the website but didn't know which one you showed in the video that i suppose to buy...
Hi will this let me run ford ids to relearn camshaft. Sensors on a mk8 ford transit and I also have an audi a5 will it work on that also? Thanks
Hello,
it is compatible with 16 original software used by dealerships. The ones you mentioned are compatible without problems. It is a perfect J2534 for its money.
Thank you for the video but on the website there are a lot of options and also are we supposed buy all licences?
Hello,
in the internet you have several options with licenses. if you choose a programmer with the name BMW, it means that he has a license for BMW.
If it has the name BMW+Mercedes it means that it has a license for these two brands. The price differs depending on which option you choose. the programmer's license is for 10 years free update
@@YOYODiagnostic thank you so much for reply, I have tactrix openport clone do you know what brands do it support, and also what is passthru does it mean limited functionality.
Hi, again, it's been a few months since you been using this tool, have you got any thing to update on? Is it worth buying? Heve you tried the toyota and can it get the 96 seed code? Thank you and I've been using the fc-200 that i bought from your video a year ago, and im loving it, about to order the new adapter for the newer ecu clone. Thank you.
In 1 year I done 3 Updates of firmware.
Friend can you help me which Diagnostic tool from lower price and clone it is better for Dozer Komatsu D65EX-18 , Thanks for help
Hello,
for that machine I don't want to give you wrong advice. I don't have any experience with those machines. Sorry 😔
I use also vcx and you are right ,is a awesome tool .i didn't try if it can run kess or not.but still awesome tool
Hello.
You can only Pcm Flash.
What interface you use for transmissions,like 6hp;or 8hp from zf?thanks
@@leventemolnar437
At work I use Flex and I personally use FC200.
It's Great .....until it bricks a module.
@@adonisnetworks
This can be also true 🙂
This is a very useful video. I have been looking for a device for Suzuki (2015-) for some time. Can you recommend something? Thanks you for this video!
Hello,
if you only want to scan then I recommend something cheap like Thinkdiag, Xtool A30M, or Launch. If you want to program then I can honestly tell you that I cannot recommend anything because I have no experience with this brand of cars.
nice video sir, i would like to ask if this can replace tactrix openport, can i use this on mmc flash or pcm flash for obd read and write for toyota, nissan, isuzu?
Hello,
Yes you can use it 🙂
@@YOYODiagnostic thank you😄
@@YOYODiagnostic one more question sir, can i use the vcx se on autocom software 2020.23?
@@grixvarilla8144
No it doesn't work.
I just buyed license for PSA and putted my diagbox VCI on sale. Are you shure that it can’t work on it? I don’t have car for test it. Thank you
Before selling make a Test. 😅
Thank you for helpful video. I am considering to buy SM2Pro HW: 2.21.22 SW: 2.21.17. Can you tell what the VCX SE you compare in this video with what version of SM2Pro. Thank you.
This VCX se has all the license active.
@@YOYODiagnostic Where did you buy yours with Full license?
@@JustMe-gx4xt
Vxdiag Shop
Thank you very much for the truth. MESSAGE TAKEN
👍
Hi what type of vcx you mean . I learned there is A lot vcx in the market .
Other question vcx can read the software alone or that need other program.
I am looking to buy vcx vw and MB. In your opinion it s a good choice. Thank you in advance.
Hi,
if you buy the one dedicated to BMW, you will not be able to buy other licenses.
My advice is to buy the one with licenses for VAG, BMW, Mercedes and then you can update.
You can buy what license you need.
Thanks
👍
Can Els27 work with Ford IDs to reprogram the PCM? Thanks
I don't know. I'm not sure but I will try on the future.
@@YOYODiagnostic Thanks
I have that one and I use for Xentry only with license. Can you tell me how can I use the device with another software?
It is not possible. You must to buy more licence's.
@YOYO Diagnostic I think I saw videos there's possible but with pass- thru mode. But I'm not sure may I wrong.
@@ipeichev88
I tried with Toyota software and it didn't work. After I bought all the licenses it worked. At the beginning I only had 3 licenses: VAG, BMW and Mercedes. After I activated them all. I think it was a good decision. At the beginning, a full one cost around 1300 euros, now it is half the price.
Hi, which model do i need to buy? The price on the website is so different i need to know thankyou please
Hello,
ask the company that sells them. I'm not a seller, you're in the wrong channel.
I can only help you with advice if you tell me what you want to do, because I have no way of guessing what you need.
hello, will this device work for Chrysler like Jeep vehicles?
What I can see doesn't have a license for Chrysler.
I'm from Philippines is it good for Toyota Honda Mitsubishi Nissan diesel and gasoline thanks
Hello, yes it is very good tool
Nice video bro, but what about the 24V version ? Is it also worth it ? I am interested mostly for Benz trucks 2005+
Hello,
maximum 18 V. but you buy an adapter from the Chinese, an adapter from 30v to 12V. I have a video on my channel where I scan a MAN.
@@YOYODiagnostic for man I use original scanmatik 2 pro, and also I have xentry passthru but passthru can't do 24V trucks . . . This 30v to 12v adapter works good ? Can work okay for launch/thinkdiag ?
@@thesmartguy3523
take a look
ua-cam.com/video/pxOYeQGkXhA/v-deo.html
Have u tried that sm2 pro module? Does it work good as j2534 with diagnostics and also for ecu flashing? Planning to buy it for odis, xentry, and pcmflash. As i cannot afford ori sm2 for some basic usage of it. Thanks!
Hello,
it's a friend's for repair, after I repaired it, I tried it and it works perfectly, it is much superior to PCMtuner.
I will make some videos for J2534 function.
I recommend the original because this clone is 200 euros and the original 500 euros.
Trust me it's worth the effort to buy the original!
@@YOYODiagnostic Where can I find an original Scanmatik 2 PRO for 500 euros? Minimum 750€ + delivery.
Hi,
Very good work 👌🏻
What is the difference with the VCI sold on Ali Express please
Hello.
The one sold in Ali Express does not support you in case you have problems. I'll give you an example, I bought it from a seller and he told me, that it doesn't work on BMW Inpa because I didn't buy the software from them.
In reality he only had to make a few settings.
These sellers are mostly out to cheat people.
Good video do you know if the 67 in 1 includes simos 8.5?
From what I know don't supported this ECU
p.s. same thing on xentry. old cars dont work with j2534
for most of these brands it works on models after 2004. That means those cars are 20 years old. For me it's ok since i have a 20 year old car once every 3-4 months.
@@YOYODiagnostictotally agree, most car repair shops dont work on these old cars anymore, because to complicated without diagnostic, have to measure manually, too time consuming
Is it better than xtool xvci max?
All this J2534 does the same job .
Hello, thank you for the explanation!
I am interested in this vci, but the laptops included in the offers from the seller are a bit old.
Can you recommend a newer laptop compatible with this vci and it's software.
Thank you
Hello,
I recommend Dell Latitude. because the case is made of hard aluminum and does not break. They are made to last. Looking for something with i7 Gen3 or Gen4 and +16GB RAM is more than enough. And the HDD can be replaced quickly, you unscrew 2 screws and remove it from the side, you don't have to disassemble the laptop. The battery with 6600 mA uses it for about 6-7 hours without charging it.
vcx can communicate in bench mode, there are people on the internet showing this
If you connect an ECU that is not mounted on the car, it does not mean that it is Bench. Maybe I'm not explaining well what I'm about to write, but those ECUs that can be read with VCX are only those that work via OBD. If I connect those EcU to 12v and ground and to CanH + CanL it is the same as if I read it via OBD. To read / write in the Bench module You need GPT 0+ GPT 1.
Olá amigo eu queria comprar sm2 pro compensa aqui no Brasil scanmatick está 1200 euros
Scanmatik is not 1200 euros!!! It's around 550
Bro запиши пожалуйста тоже самое тока на руском, и там еще вариант есть у них вцикс алл сканер там отдельно эзернет и так же вас можно через него воткнуть на сколько я понял
Он на столько плохом английском разговаривает, что это почти руский язык
Pls the link for vcx
vxdiagshop.com
What is live data read speed per millisecond
I was never interested in knowing such data. It doesn't help me at all to know that the important thing is that it works and does its job.
Unfortunately, it doesn't always work correctly with E series BMW
👍
Another decent ori tool, is tactrix openport, genuine. Its around 200euro, or ori scanmatick 2pro , around 700 euro...
True I agree with you! 👍
i have VXDIAG DOIP ALLScanner and i love it! best purchase ever
Still going good ? So far what have you tested it on ? Any 24V work ?
🤍🤍🤍🤍
👍