i can't thank you enough for making this video i just got these grips in smooth black and was having a hard time figuring out how to get the old grips off.
theoretically yes, you would need to make sure the handlebar on your bike is the proper diameter to receive the grips. If your handle bar diameter is too small the grips will rattle and the setscrews will not properly tighten down on your handlebar.
some beside the point stuff. anybody knows how to remove and put back the f screws. I had a problem of putting back the cable on the holes in the grip.(shadow400). didn't remember how the cable went around the grip and had a very short pull. I have seen a video and did it the right way. terrible 📹, the cameraman was drunk and the camera as well cause it couldn't give a f...k and focus. I don't wanna see the hands I wanna see the rest and keep it in one spot for a second so we can see what's going on.
Yes, unfortunately living in Arizona it does get hot but there are ways around this problem. You can get white rags or a old shirt and cover your handle bar grips or what we would recommend would be a zip up beer koozie. This way your grips are covered while remaining stylish to match your tastes.
Development can be tricky and many companies may not have the resources like the larger companies have. If the product works with little modification, and the repercussion money-wise is not huge, then some modification is worth it. In the end, most people want more big power with striking looks anyways.
Cameraman did a good job between drinking his beer with one hand while rshooting the video and handling the focus with the other!
Hahahaha no shit!
You are awesome man
You’re the only one who explain it
i can't thank you enough for making this video i just got these grips in smooth black and was having a hard time figuring out how to get the old grips off.
Manual focus for the win. Thank you for the video.
Man you did a real showbike, looks fantastic !
Why grind off the location pin? Why not just drill a new hole for the pin in the handlebar? That way the switch housing is guaranteed to never twist.
Very helpful installing new bars and grips 2007 Honda shadow 400 spirit of the Phoenix
taking a left grip off without damaging it, YES , thank you!
Trying to find a pair of these, do you have them for sale still? Thanks!
awesome video thanks alot very helpful god bless u
Thanks for the video, very helpful!
Dude great video!
I cant get the cable attached.. I do just like the video but my cable on top seems a bit shorter. I have it adjusted all the way out.
Have you done any upgrades like fork extensions or risers or new bars?
how do you get the ends back into the holes? i cant for the life of me!!!
dave williams do you have the right size if you ordered of Amazon some of them are 7/8" or 1"
Are the grips same for a Harley as the Honda ?
Not sure the size of the bars for Harley.
Can i use thiese grips on bicycle?
theoretically yes, you would need to make sure the handlebar on your bike is the proper diameter to receive the grips. If your handle bar diameter is too small the grips will rattle and the setscrews will not properly tighten down on your handlebar.
@@LowandMEANcom so it is possible to lock the right grip ? yes im planning to get 22.2mm of similar grips.
i cant get my grip on with the trottle cables
thanks
you rock men,,
Doesn’t sound like Accutronics makes a hand grip to fit the fury because you should not have to do all those mods to get there hand grips to fit .
what size are the grips
Slightly bigger than normal. Find the size that fits your bars appropriately.
Why not just drill new hole for the left switch box
some beside the point stuff. anybody knows how to remove and put back the f screws. I had a problem of putting back the cable on the holes in the grip.(shadow400). didn't remember how the cable went around the grip and had a very short pull. I have seen a video and did it the right way. terrible 📹, the cameraman was drunk and the camera as well cause it couldn't give a f...k and focus. I don't wanna see the hands I wanna see the rest and keep it in one spot for a second so we can see what's going on.
These look cool but I live in Arizona and I don’t wanna cover my bike wherever I park it lol they will probably get hot af wile I’m at work lol
Specifically the chrome ones
Yes, unfortunately living in Arizona it does get hot but there are ways around this problem. You can get white rags or a old shirt and cover your handle bar grips or what we would recommend would be a zip up beer koozie. This way your grips are covered while remaining stylish to match your tastes.
@@LowandMEANcom that’s an amazing idea and I’m going to get my old red dog koozies from storage rn
So these grips are NOT made for a Fury otherwise grinding would not be necessary.
Yep
Camera man needs a tutorial on taking videos lol
8 years of trial and error. Hope you enjoyed our information content!
There is something called instruction manual on the web and it holds all that info. LOL
If your making a part for the bike, why would modification be needed. Useless product.
Development can be tricky and many companies may not have the resources like the larger companies have. If the product works with little modification, and the repercussion money-wise is not huge, then some modification is worth it. In the end, most people want more big power with striking looks anyways.
Next time don't ask a 5 year old to take a video for you !!! Ffs