Test & Fix P0089 Fuel Pressure Regulator

In this video I explain how I test the Fuel Pressure control valve when there is P0089 Fault code on GDI engines. I explain the Fuel Pressure Control Valve operation, I show you the wiring diagrams, I explain how to test the control valve with a multimeter and how to test the wiring.
You may like to watch the following videos too:
How Immobilizer Works | Transponder Chip, Immobilizer Components, How to Bypass Immobilizer
• How Immobilizer Works ...
CAN-BUS Explained | Everything You Need to Know About CAN-BUS | CAN-Bus Diagnostics & How It Works
• CAN-BUS Explained | Ev...
Don't Replace ABS Module Before Watching This | Repair ABS Module for Motor & Valve Relay Error
• Don't Replace ABS Modu...
Join the channel for more videos and more support:
/ @automotivediagnosis
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
fix-it-first.com
#engine #P0089 #p0090
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

[@AutomotiveDiagnosis]

You might be interested to watch the following video too:
Gasoline Direct Injection (GDi) Fuel System Explained
ua-cam.com/video/5aFkHjqL1Bw/v-deo.html

[@aliali-tl3lh]

شكرا استاذ كان الشرح جد جميل

[@AutomotiveDiagnosis]

Thanks my friend. I’m glad you enjoyed it.

[@faluauto-trungtamdaotaophukien]

Thank you very much for this video

[@AutomotiveDiagnosis]

Thanks for watching

[@ravigarage8745]

Good job sir

[@AutomotiveDiagnosis]

Thanks my friend

[@bwagizoselemani8434]

God bless you sir

[@AutomotiveDiagnosis]

Thanks 🙏

[@cross-line-gaming5222]

Hi sir, what if the high pressure sensor working all the time except when the engine is too cold and after driving for 100m the pressure stuck at 4.5 bar then after turning the ignition off and back it on the problem would be fixed!???

[@amarabdelli487]

Thanks for sharing

[@AutomotiveDiagnosis]

Thanks for watching

[@h..h...9589]

Gud job sir.. where you frm

[@AutomotiveDiagnosis]

Thanks mate, Australia

[@h..h...9589]

Sir can you explain how many
Components used electrical means ecu location immbolizer keyfob ecu etc how they find i think you understand my point plz