What about timbre matching? Do you hear any audible disturbance during movies? Because I could see you have assembled svs for your centre Great choice by the way because a 3 way centre speaker could increase the clarity of sound in a movie
Forget about timbre matching bro 😅 you couldn’t feel any matching issues in the front stage in my setup. Just do the proper calibration and level matching tats all ✌️
@@sammienalaza8684 I feel it as a neutral amp. Not a bright one. Again these characteristics depends on the lots of factors like speakers and processor
@@HometheaterEnthusiast not true at all lol you should really get the matching left and right ultra towers they are way better than the Q anyways I’m about to get a xpa-3 for my lcr too
I have a question, I have a denon x3300w and it has been great but I’m thinking an external amp will help with the sound of my klipsch speakers, I was looking at the new Base x 3 emotiva which is at 140watts all channels, my denon says it’s 105 wats two channels driven which is unlikely way lower then advertised, I’m stuck between the bass x 3 that’s 140watts or the one you have that gives 275watts, which do you think will do best, I mainly play video games and movies and TVs here and there
@@HometheaterEnthusiast ok, I was hoping for some kind of sale, I saw a guy on offer up selling the 275 watt 3 channel for $800 and I couldn’t get it, that was a good deal, ok, imma wait till the weekend if any kind of sale but I hardly seen them have any
I'm using Emotiva BasX A3 & I'm thinking to Upgrade with XPA-3 for my front stage, Using Polk Reserve R600 & R400 (center). (Polk audio reserve series speakers are bit power hungry speakers), What is your suggestion on this. What difference you felt using BasX & XPA. Please reply your suggestion will be great help for me...!
As I explained in my review on XPA series, I could feel audible difference when moved to xpa from bas x series. The front stage becomes more powerful, more dynamic and better stereo separation. Hope you could also feel the same.
@@HometheaterEnthusiast After your advice I have decided to go for XPA-3 & will use BasX A3 for my two Surrounds rest AVR will take care. I'm using Denon AVR-X4700H. Thanks...🙏🏼
@@HometheaterEnthusiast Hello,,, After a long wait finally last week I got my XPA 3 & U were so right I'm so happy with XPA3's performance. I have put A3 for my two Surround speakers & they are also performing very nice. Big Thanks to you for your advice & suggestion. Now I'm so much satisfied with my System. Thanks...🙏🏼
Really really nice than what other professionals r showing with 20-30 lac budget... The sounding is totally different on mobile phone itself.. Good work ..
Your emotive power amp all channels 275 watts but your floor standing speakers are175 watt how to you connect if volume increases any problem will come?
hi I have humming sound comes from Switch Mode Power Supply and also humming sound comes from my speaker after connecting the External Power Amplifier XPA 11 GEN 3 before using this External Amplifier I was connected with Marantz SR8015 and wasn't there this issue, I don't know how to solve this issue if I use power conditioner it may solve this issue or not because I'm planning to buy a ' Taga PC - 5000 ' Power Conditioner do you think it's going to solve this issue or not if you have also any suggestion I'll be appreciate that hope to assist me with it ASAP.
There are multiple possibilities for humming sound, in my limited knowledge I can give you some suggestions, before going for a resolution try to figure out the actual issue, Since u have sound coming from SMPS (hope you r talking about the XPA smps) i will recommend to check your power supply at ur home. For better life and performance of the Equipments always go for an online ups like APC srv3kl depends on ur power need - this will produce steady output with pure sinewave wave form. Secondly use xlr cables for better noise reduction. Third, check if any chance for a ground loop in your system, to avoid this u can try using a single socket for all ur Equipments using a good power strip. Hope it may help you.
Its sad I know but there were no other options to me because of space constraints also ust projector is at the top. Currently I moved to oled tv now my centre channel is at perfect spot 🤩
Good video. Are you using servo stabilizers for powering all your AV devices? Which budget servo stabilizers available in market for managing power fluctuations
Pls review monlith 11x and its price in india or suggest me a best 11 channel amplifer (emotiva xpa 11 is powering 65 watt per channel for the stereo ) so pls suggest other than that
Monolith 11x is not available in india, yamaha has 11 channel option but again it may not be tat powerful, I will suggest u xpa5 & basx A7 if its okey for dual amps
Does it have volume control and I ve purchased denon x6700 and then I've been attached emotiva for preamp my front floor standing speakers monitor audio mr series MR-4 and it can handle max Power is 120w@6ohms ,can I match this power amp to my speaker and will it damge my speakers pls suggest me sir thank you
Hello ...can we use online ups for power amplifier also...if yes how much kv online ups will be required for projector, amplifier (denon) and power amplifier( Xpa series) ...as this items are costly ..as everyone whants this things to run for longer time.
@@skbgrips It is recommended to use online ups for all of ur electronic Equipments. U can sum up all the power consumption of ur devices and go for an online ups with tat much capacity. But Im sure that it will be costly if u want to connect xpa also because xpa 3 itself has a power consumption of 1400watts. And powerful online UPS are very costly
I've monitor audio mr-4 floor standing speaker and mission speaker (M CUBE+SE)5.1 packages and setup 7.1 and I newly purchased denon x6700 will it damage my speaker or need to change my speakers if need, suggest me the best speakers for denonx6700
What about timbre matching?
Do you hear any audible disturbance during movies?
Because I could see you have assembled svs for your centre
Great choice by the way because a 3 way centre speaker could increase the clarity of sound in a movie
Forget about timbre matching bro 😅 you couldn’t feel any matching issues in the front stage in my setup. Just do the proper calibration and level matching tats all ✌️
@@HometheaterEnthusiast hi sir is this model sounds bright or warm?
@@sammienalaza8684 I feel it as a neutral amp. Not a bright one. Again these characteristics depends on the lots of factors like speakers and processor
@@HometheaterEnthusiast not true at all lol you should really get the matching left and right ultra towers they are way better than the Q anyways I’m about to get a xpa-3 for my lcr too
Get that center off the floor! It needs to be up on that next shelf up
Ya I know, but no chance 😞. Its my ust projector sitting on top.
Your videos explain asoom
I have a question, I have a denon x3300w and it has been great but I’m thinking an external amp will help with the sound of my klipsch speakers, I was looking at the new Base x 3 emotiva which is at 140watts all channels, my denon says it’s 105 wats two channels driven which is unlikely way lower then advertised, I’m stuck between the bass x 3 that’s 140watts or the one you have that gives 275watts, which do you think will do best, I mainly play video games and movies and TVs here and there
If u have budget go for xpa 3 it worth for the money,else basx a3 is also good. Both case u will get better output than ur avr.
@@HometheaterEnthusiast ok, I was hoping for some kind of sale, I saw a guy on offer up selling the 275 watt 3 channel for $800 and I couldn’t get it, that was a good deal, ok, imma wait till the weekend if any kind of sale but I hardly seen them have any
@@danielgutierrez2882 ooh tat was a good deal 😞
@@HometheaterEnthusiast Hi Iam from India. What is the discount we can get on power amp
I'm using Emotiva BasX A3 & I'm thinking to Upgrade with XPA-3 for my front stage, Using Polk Reserve R600 & R400 (center). (Polk audio reserve series speakers are bit power hungry speakers), What is your suggestion on this. What difference you felt using BasX & XPA. Please reply your suggestion will be great help for me...!
As I explained in my review on XPA series, I could feel audible difference when moved to xpa from bas x series. The front stage becomes more powerful, more dynamic and better stereo separation. Hope you could also feel the same.
@@HometheaterEnthusiast Thanks a lot for replying back...👍🏼
@@HometheaterEnthusiast After your advice I have decided to go for XPA-3 & will use BasX A3 for my two Surrounds rest AVR will take care. I'm using Denon AVR-X4700H.
Thanks...🙏🏼
@@shakhussain21 Hope u will enjoy the upgrade 😊👍🏼
@@HometheaterEnthusiast Hello,,,
After a long wait finally last week I got my XPA 3 & U were so right I'm so happy with XPA3's performance. I have put A3 for my two Surround speakers & they are also performing very nice. Big Thanks to you for your advice & suggestion. Now I'm so much satisfied with my System. Thanks...🙏🏼
Really really nice than what other professionals r showing with 20-30 lac budget...
The sounding is totally different on mobile phone itself..
Good work ..
Thanks 😊
Your emotive power amp all channels 275 watts but your floor standing speakers are175 watt how to you connect if volume increases any problem will come?
No problems, if u have a decent size room and a good acoustics 50watts will be more than enough for a reference volume.
hi I have humming sound comes from Switch Mode Power Supply and also humming sound comes from my speaker after connecting the External Power Amplifier XPA 11 GEN 3 before using this External Amplifier I was connected with Marantz SR8015 and wasn't there this issue, I don't know how to solve this issue if I use power conditioner it may solve this issue or not because I'm planning to buy a ' Taga PC - 5000 ' Power Conditioner do you think it's going to solve this issue or not if you have also any suggestion I'll be appreciate that hope to assist me with it ASAP.
There are multiple possibilities for humming sound, in my limited knowledge I can give you some suggestions, before going for a resolution try to figure out the actual issue,
Since u have sound coming from SMPS (hope you r talking about the XPA smps) i will recommend to check your power supply at ur home. For better life and performance of the Equipments always go for an online ups like APC srv3kl depends on ur power need - this will produce steady output with pure sinewave wave form.
Secondly use xlr cables for better noise reduction.
Third, check if any chance for a ground loop in your system, to avoid this u can try using a single socket for all ur Equipments using a good power strip.
Hope it may help you.
emotiva xpa7 vs marants 8807 which 1 is best ....kindely reply
XPA7 😍
Amazing! I can actually understand Hindu!
It sounds amazing on my iPhone.
I will be upgrading from my A3 after the new year.
Thank you 👏🏼🔊👍🏼
Great … enjoy 😊
Is this all for demo purpose or buying urself fr personal use!?! Spending a lot to great extent!!!
Yes bro, none of these brands available in india, only distributors, so we need to buy Equipments 😞
Sounds nice, I see you used balanced cables for the front 3 and rca for the backs, a good combo
Highly expensive set up.
Such good gear. Why on earth would you put your center on the floor?!
Its sad I know but there were no other options to me because of space constraints also ust projector is at the top. Currently I moved to oled tv now my centre channel is at perfect spot 🤩
Hello I have been using Denon 6700 av receiver for svs PB 16 ultra now,for an second subwoofer can I use Klipsch SPL 150
U can use, but for a perfect match i will suggest atleast same brand
Don’t do that
There u r ❤
Good video. Are you using servo stabilizers for powering all your AV devices? Which budget servo stabilizers available in market for managing power fluctuations
Im using online ups not Stabilisers, these are 230 constant with pure sine-wave, will be a little costly tho
go to APC UPS 2200VA its perfect for any AVR or other related equipment .
I like your setup sir
Sir Wich prossecr you using please tell me
I was using av7705 before now upgraded to 8805A
Awesome bro
Pls review monlith 11x and its price in india or suggest me a best 11 channel amplifer (emotiva xpa 11 is powering 65 watt per channel for the stereo ) so pls suggest other than that
Monolith 11x is not available in india, yamaha has 11 channel option but again it may not be tat powerful, I will suggest u xpa5 & basx A7 if its okey for dual amps
@@HometheaterEnthusiast thanks bro
@@HometheaterEnthusiast do videos about your screen bro.
@@sarathmanoharan2 will do it bro 👍🏼
Does it have volume control and I ve purchased denon x6700 and then I've been attached emotiva for preamp my front floor standing speakers monitor audio mr series MR-4 and it can handle max Power is 120w@6ohms ,can I match this power amp to my speaker and will it damge my speakers pls suggest me sir thank you
It won’t damage ur speakers but u need to make sure that u r not overdriving the speakers, because xpa can go beyond 270watts.
Got it sir
Thanks for your answer sir
Suggest me good speaker packages for that setup sir pls
Will I go to emotiva bas x5, is it k for me sir
very nice setup congrats
Thank you 😊
the dimensions of your room?
Its a small room, around 10*14 feet.
Hi sir exlent video explained
Thank you 😊
Isn't it too much of power for your tower speaker. Can we over power over power our speaker...do more such videos ❤️
It can handle upto 160 watts but we usually don’t need that much power for a decent volume. Its all about refinement and dynamics 😊
Hello ...can we use online ups for power amplifier also...if yes how much kv online ups will be required for projector, amplifier (denon) and power amplifier( Xpa series) ...as this items are costly ..as everyone whants this things to run for longer time.
@@skbgrips It is recommended to use online ups for all of ur electronic Equipments. U can sum up all the power consumption of ur devices and go for an online ups with tat much capacity. But Im sure that it will be costly if u want to connect xpa also because xpa 3 itself has a power consumption of 1400watts. And powerful online UPS are very costly
@@HometheaterEnthusiast yeah that's also a fact... thanks for ur response....
Thanks a lot 😊❤️
I've monitor audio mr-4 floor standing speaker and mission speaker (M CUBE+SE)5.1 packages and setup 7.1
and I newly purchased denon x6700
will it damage my speaker or need to change my speakers if need, suggest me the best speakers for denonx6700
Hii where do you bought denon x6700 and whats the price?
@@Harishkumar-rb6hs I was purchased near by dealer at decent price si
@@vhariharasudhan7215 where and how many rupees?
2.25k sir
Chennai
Very nice
Thank you 😊
Nice sir
Thank you 😊