Transfersuperstars- HJD Wide Format DTF Printer Daily Pre-Production Standard Operation Procedure

Поділитися
Вставка
  • Опубліковано 28 лис 2024

КОМЕНТАРІ • 23

  • @sa4555
    @sa4555 2 роки тому +1

    After second cleaning cycle, the density of the white ink also improved. This is another common problem with white inks on DTF, usually after one cleaning cycle the standard print check only prints lines and if all lines are printed most people start printing. But you instead used all available colors plus white, showing a better status of ink within the printheads. As a standard practice now, we usually run two clean cycles after each weekend.
    I also really like you using orange and green colors, I am sure you can get very close to those color targets. Usually we inform our customers about how close the print colors will be to their actual pantone values. Use of Fluorescent Yellow and Magenta gonna produce some interesting results. Good video sharing your SOPs.

  • @amandacotter3442
    @amandacotter3442 11 місяців тому

    Do you have a video on doing an alignment with an HJD printer?

  • @shaunabriggs6129
    @shaunabriggs6129 Рік тому

    Can you give some instructions on the shaker/dryer please. I have the HJD 2 head printer with shaker/dryer.

    • @transfersuperstars
      @transfersuperstars  Рік тому

      Did you just get the HJD? I'm not sure what components are in the newer machines. The shaker has been pretty straight forward. Just takes some time to get used to printing a full run.

    • @shaunabriggs6129
      @shaunabriggs6129 Рік тому

      @@transfersuperstars yes. The printer is up & running. Do you know what heat to set it on? Speed of shaker?

  • @alishawestling6335
    @alishawestling6335 Рік тому

    Favorite place to buy your powder from? DTF Pro has been out of the 10lb forever, and I'm tired of buying the smaller bags.

  • @yusifharuna2122
    @yusifharuna2122 Рік тому

    How do I set the media clamp so that, the printing media won’t raised

  • @SteveHookEm
    @SteveHookEm Рік тому

    What whisker is that? Do you happen to have a link?

  • @JD-iz9mi
    @JD-iz9mi 2 роки тому

    Do you have any videos on how to use the maintop software?

    • @transfersuperstars
      @transfersuperstars  2 роки тому

      We don't unfortunately. We use maintop but don't love it. We're looking into different programs at this time.

  • @Tunagraphix
    @Tunagraphix Рік тому

    Love your page brother! I’m a small time designer looking for a printer to have a home for dtf prints. any recommendations? Again I’m small time but I got super dope designs. Would like to be able to print some dtfs !

    • @transfersuperstars
      @transfersuperstars  Рік тому

      We use commercial printers at this time and wouldn’t be able to advise on a good at-home printer

  • @CraftSignSupply
    @CraftSignSupply Рік тому

    Where do you purchase your fluorescent inks? Which DTGpro inks do you use?

  • @charllotecapola6533
    @charllotecapola6533 2 роки тому

    Hello! I’m a Maintop user. I hope you can help me with my problem. It seems like my softwares (Maintop and Hosonsoft) are not picking up the CONTRACT I made in Photoshop. Thanks in advance!

    • @transfersuperstars
      @transfersuperstars  2 роки тому

      In photoshop, name your white spot channel very carefully. It should be uppercase.

    • @charllotecapola6533
      @charllotecapola6533 2 роки тому

      @@transfersuperstars Thanks! I will try this later. Have a great day!

  • @srdesigneredition6407
    @srdesigneredition6407 2 роки тому

    Question can the L1800/1390 dtf printer print 13” ?

    • @yourunclesam6780
      @yourunclesam6780 2 роки тому

      not,the L1800 is for 11.750 x 16.500 only

    • @elijahgjertson2295
      @elijahgjertson2295 2 роки тому

      @@yourunclesam6780 this is not correct. I am using my l1800 to print a 13" x 19" as I type this.