What a AWESOME job Juius! Creating memories your son will remember his whole life. Started flying RC with my dad in 1977 and I wouldn't take all the money in the world for all the wonderful memories I have with my father. Full scale flying too. We had the best of both worlds!
What a nice plane that is That plane is better made than my EFlight models from horizon hobby.That foam board is good.I made a airplane stand out of that board along with white duck tape.The stand works great.I need it because all I fly are low wing hand launch aircraft.I use the stand to put the wing on and install/remove batteries while flying.
Congratulations on the amazing growth of your channel Julius, it wasn't all that long ago you were talking about doing a blender tutorial when you reached 50k subscribers, and now that's more than doubled, well done sir
Julius, beautiful job building the airplane. Your son did a good job flying it. I liked your picture at the end of the video. You left out the most important member of your 'team'; the camera lady! She worked hard keeping the airplane in the frame. She did a great job filming. The flying site is beautiful. Best regards to you and your family. Phoenix, AZ
Thanks, she actually will compete on Flying Robot Competition on behalf her University for next year, she will learn to fly too including her team mates.
Absolutely GREAT looking plane!! This type of foam is very expensive where I live so I cannot build it unfortunately. Absolutely LOVE your design!! Thank you for the video!
Hi Julius, is this a better flyer than your Bango 1 & 2 trainers? So what wonderful aircraft have you got planned next? I love all your designs so far! You are a terrific designer,keep up the work Sir 😁😎👌👍🇬🇧
I just uploaded the correct files, if you need it fast email me to juliusperdanapr@gmail.com. Because sometimes my site needs time to refresh new files
Nice lines! Looks like a nice fling trainer! Do you have any positie incidence on the main wing? It helps the plane to lift off when it has the needed airspeed 🙂
Hey Julius! what a nice project to make your son enjoy the RC! Congrats! - Long time we didn´t see you build an airplane - It´s healthy take a break sometimes ☺ I am currently working on a A4 Skyhawk EDF and the last lap of a BANDIT EDF nowdays , cya!
Thanks Lucas, yes I think I've lost the battle for audiences in RC aircraft models topic with similar channels, so now I pivoted the topic to general RC to have more views, but will still make some model planes in between big projects.
@@JuliusPerdana mmm i guess you are between the top channels of scratchbuild planes. Maybe the problem is not you or your channel, maybe just the target audience of scratchbuild proyects become narrow... lately i see the videos of some branded planes get more views than the same airplane model but made by DIY techniques. Anyway i will still supporting your channel as i do it for almost 4 years. 🤩
I think tutorial style is dead now, we are getting old lol and not much wanted to build their own plane no more. Also in this economy people just want to have fun watching and not to build, as the parts are getting expensive and hard to find like foam board etc. So I need to broad the topic so I can reach people outside RC planes but still RC related. Now I'm testing SR-71 profile/ plank plane and designing F4U Corsair for future build, maybe after the big project. I'm building a UGV that can shoot lol.
@@JuliusPerdana Sadly, i agree with you Julius. The builders in the RC airplane hobby are less and less. Anyway, from my humble channel i will continue to fight against it. Good luck and good flights! or drives! hehe 🙂
hey juiluis! its me again everything went fine and i got done with the build a few days back (the boeing 737 -300) you make really good build tutorials just saying .im here to ask whether you have a video that explains detailed information of how the electrics in your planes work and how to connect the servos,motors,esc's etc to a remote in general how do to the entire electrics section because i really want to but i just want to know how to do everything before i go ahead and order the parts in for doing everything once again thank you very much
Depron is only a brand name. Search for xps (Extruded polystyrene)sheets, there are many suppliers around. Again, it depends where you are in the world!
Hey julius ive watched a video of yours from about 4 years bacl i want to do that for my exhibition project at school and i was half way through finishing up the nose i went to the belly fairing section thats when disaster strucki tried my very best but i couldnt get the parts to align porpely no matter how much i try its too short even after precisely using the blue print the video is the rc scale model of the b 737 300 please do reply as quick as possible i relaly need your help for this cuase thank you
don't panic, just detach the problem part using a hot knife. And then clean the glue. Find out which part that did not match, maybe it's for the rear or vice versa. If still not match, just trace the part and make it longer by 0.5cm or 1 cm, and then try to re attach it again.
@ yes juluis its going all fine i just have a small question is it possible to paint foam sheets using sprsy paint?? Or will it melt or warp if i do so?
@@JuliusPerdana and i how much ever i adjusted it it kept on bringing the same problem so what i did was take out the part and trace out the shape using a tracing paper and then made a custom cutout and had it done and it turned out pretty well if u have a id where i can send you the picture i surely would
"Dara actually inspired by Tecnam P2010 trainer plane, but I change the wing shape". So you basically broke the copywrite laws to make this plane. Last time I checked you can go to prison for stealing copywrite laws.....!!!!! Tecnam's lawyers have been notified.
What a AWESOME job Juius! Creating memories your son will remember his whole life. Started flying RC with my dad in 1977 and I wouldn't take all the money in the world for all the wonderful memories I have with my father. Full scale flying too. We had the best of both worlds!
Sir where is your giant 747-400 you haven't gave any update about it.
Glad to see you back building RC planes.
Wonderfull plane , we'll done
Very nice model. A real trainer. He'll make your son very happy
Nice sir , think this will be quite popular, nice flying jr , flies like his father 😊 👍🙏
Unique model ..
Thank you for this new plans ..
You always the first ..
Simplemente hermoso y como siempre muy bien construido, se agradecen los tips que se pueden rescatar de tus vídeos
Great design Julius! Once again, you make it look SO easy..
Lovely day with your kids. Grate looking plane once again. Your the master
Thank you kindly
What a nice plane that is That plane is better made than my EFlight models from horizon hobby.That foam board is good.I made a airplane stand out of that board along with white duck tape.The stand works great.I need it because all I fly are low wing hand launch aircraft.I use the stand to put the wing on and install/remove batteries while flying.
Beautiful plane. Love the graphics. Your son flew well and your daughter did nice camera work.
Thank you very much!
Well done Julius.Keep up the great work.
Many thanks!
Geloo karya anak bangsa keren banget😊❤
Congratulations, very nice model.....
Many thanks!
Amazing.
We are so happy to see you again.
We have missed your projects.
We love all your planes.
Thank you so much for sharing.
Thank you so much 😀
Great work Julius, you make it look so easy! Thanks for sharing the plans and your experience with us, we really appreciated!! Keep it up!!
Thanks a lot!
Happy that you are back building planes again! waiting for the B-1 and Concorde
Very nice sleek design and build!👍👍
thank you
Congratulations on the amazing growth of your channel Julius, it wasn't all that long ago you were talking about doing a blender tutorial when you reached 50k subscribers, and now that's more than doubled, well done sir
Absolutely fabulous ! Great job Dude ! 😉🙃😎 NZ
Glad you enjoyed it
Imagine telling your friends at school that you dad builds rc planes, 10/10 best dad ever and also the coolest dad ever
Yes he's quite popular in his school science club
Julius, beautiful job building the airplane. Your son did a good job flying it. I liked your picture at the end of the video. You left out the most important member of your 'team'; the camera lady! She worked hard keeping the airplane in the frame. She did a great job filming. The flying site is beautiful. Best regards to you and your family. Phoenix, AZ
Thank you Garry, next time I will include her, thanks again
Bang Julius kalau making rc teknikel banget ,dilihat seperti mudah 😂 tapi dipraktekkan pusing mengikutinya 😂😂🙏.💪 Terus berkarya abangku
sering bikin nanti juga bisa
Siap abangku 💪?modelnya keren ?@@JuliusPerdana
New subscriber here, your kiddos are lucky and blessed to have a talented dad like you. Awesome work!
Thank you so much!
Great family sport 👍Need to get sister on the sticks 👍
Thanks, she actually will compete on Flying Robot Competition on behalf her University for next year, she will learn to fly too including her team mates.
Absolutely sick 👍🏾
Hı julius. This Job is perfect.
We are waiting wingspan 180cm carbon cub. 🛩️🛩️🛩️
Absolutely GREAT looking plane!! This type of foam is very expensive where I live so I cannot build it unfortunately. Absolutely LOVE your design!! Thank you for the video!
Thank you. Where are you my friend?
@@JuliusPerdana hello I live in the Netherlands.
you are a genius just keep up the good work 👍
Thank you so much 😀
Thanks Julius nice model congratulations.
Wah mantap sekali bang⭐⭐⭐⭐⭐👍🇲🇨
terima kasih
Hi Julius, is this a better flyer than your Bango 1 & 2 trainers? So what wonderful aircraft have you got planned next? I love all your designs so far! You are a terrific designer,keep up the work Sir 😁😎👌👍🇬🇧
Hey Julius! I've seen the plans, there is one part missing, W6 wing joiner.
Can you fix it?
Thanks.
Okay I'll update ASAP
@JuliusPerdana Thanks, I've started building, I'm currently at wing so waiting for the update.
Thanks.
I just uploaded the correct files, if you need it fast email me to juliusperdanapr@gmail.com. Because sometimes my site needs time to refresh new files
@@JuliusPerdana I´ve send email. Thanks.
Nice👍
Nice lines! Looks like a nice fling trainer! Do you have any positie incidence on the main wing? It helps the plane to lift off when it has the needed airspeed 🙂
Amazing sir
Amazing project once again. Would you consider building the su-47?
Hey Julius! what a nice project to make your son enjoy the RC! Congrats! - Long time we didn´t see you build an airplane - It´s healthy take a break sometimes ☺ I am currently working on a A4 Skyhawk EDF and the last lap of a BANDIT EDF nowdays , cya!
Thanks Lucas, yes I think I've lost the battle for audiences in RC aircraft models topic with similar channels, so now I pivoted the topic to general RC to have more views, but will still make some model planes in between big projects.
@@JuliusPerdana mmm i guess you are between the top channels of scratchbuild planes. Maybe the problem is not you or your channel, maybe just the target audience of scratchbuild proyects become narrow... lately i see the videos of some branded planes get more views than the same airplane model but made by DIY techniques. Anyway i will still supporting your channel as i do it for almost 4 years.
🤩
I think tutorial style is dead now, we are getting old lol and not much wanted to build their own plane no more. Also in this economy people just want to have fun watching and not to build, as the parts are getting expensive and hard to find like foam board etc. So I need to broad the topic so I can reach people outside RC planes but still RC related. Now I'm testing SR-71 profile/ plank plane and designing F4U Corsair for future build, maybe after the big project. I'm building a UGV that can shoot lol.
@@JuliusPerdana Sadly, i agree with you Julius. The builders in the RC airplane hobby are less and less. Anyway, from my humble channel i will continue to fight against it. Good luck and good flights! or drives! hehe 🙂
Hi Julius Perdana can you make more of Styrofoam planes thanks for the amazing models!!!
Great model, you are a master. Have you any video to learn how to use pepakura for create parts? It would be very interesting. Thanks
Yes I have, go to my channel, find RC Knowledge Playlist, there are 3 parts video series, part 1 is free but part 2 and 3 for member only
Julius ❤❤❤... Please tell me, why don't you ever think to build saab viggen????? Please make one for 64mm edf!!!!
I don't know...
The 747-400 , tomcat f-15 and c10 Hercules also not yet finished up to fly and plans also
Hello julius, you can designed and build a plane IA-63 PAMPA of Argentina..... Greeting from Argentina😄😄
sir your all model is super
my one small request in you
can you make TU 160 bomber aircraft😊
hey juiluis! its me again everything went fine and i got done with the build a few days back (the boeing 737 -300) you make really good build tutorials just saying .im here to ask whether you have a video that explains detailed information of how the electrics in your planes work and how to connect the servos,motors,esc's etc to a remote in general how do to the entire electrics section because i really want to but i just want to know how to do everything before i go ahead and order the parts in for doing everything once again thank you very much
Thanks, I have one video on building Bango 2
Sir I hope that someday you will build an F-5 Tiger
gurih ini enak pake kabel tis yaa lbh cpt 😅
iya cuman kalo punya situ kedikitan kabel tisnya jadi gampang jebol
Sir i building the boing 747 400 i need the electronics video please 😢😢
Do you have the STLs for the wheel covers?
coming soon
How to make rc c17 making?
Any chance you can make the 3D printed wheel pant files available?
coming soon
Hey Julius how are you doing
How did you get depron, it's impossible to find now.
where are you Europe or US, I have 2 website links that sell Depron
Depron is only a brand name. Search for xps (Extruded polystyrene)sheets, there are many suppliers around. Again, it depends where you are in the world!
@@JuliusPerdana Australia
Hello can you made JF 17 thunder plz
Hello
Im finding that the download links for your older project is not available
Can you please check that out
Thabk you very much
Can you tell me what models are they?
@@JuliusPerdana most stuff under the "Gundam" section on your website
Appreciated if you can get it back up
@@JuliusPerdana and the pdo instructions in the pdf are missing as well, can you please check that
jas 39 gripen edf Can you teach me how to do it?
ok
👍
I want you to make a video on how to make a General Dynamics F-111 Aardvark plane Please😇😇😇😇😇😇😍😍🥺🥺🥺
ok
Link PDF project???
check description or go to paper-replika.com
I hope you build yf23 black widow 2
ok
Hey julius ive watched a video of yours from about 4 years bacl i want to do that for my exhibition project at school and i was half way through finishing up the nose i went to the belly fairing section thats when disaster strucki tried my very best but i couldnt get the parts to align porpely no matter how much i try its too short even after precisely using the blue print the video is the rc scale model of the b 737 300 please do reply as quick as possible i relaly need your help for this cuase thank you
don't panic, just detach the problem part using a hot knife. And then clean the glue. Find out which part that did not match, maybe it's for the rear or vice versa. If still not match, just trace the part and make it longer by 0.5cm or 1 cm, and then try to re attach it again.
@@JuliusPerdana okay thank you so much juluis keep up the good work havent seen a youtuber like u in ages
How it's going, have you find solution about your hurdle?
@ yes juluis its going all fine i just have a small question is it possible to paint foam sheets using sprsy paint?? Or will it melt or warp if i do so?
@@JuliusPerdana and i how much ever i adjusted it it kept on bringing the same problem so what i did was take out the part and trace out the shape using a tracing paper and then made a custom cutout and had it done and it turned out pretty well if u have a id where i can send you the picture i surely would
🇧🇩🇧🇩❤
hello julius make a rc sr 71
I am
@@JuliusPerdana WAIT REALLY ?????????????????
preliminary design, still test CG and control surfaces, it's a long way
pesado
"Dara actually inspired by Tecnam P2010 trainer plane, but I change the wing shape". So you basically broke the copywrite laws to make this plane. Last time I checked you can go to prison for stealing copywrite laws.....!!!!! Tecnam's lawyers have been notified.
Inspired is not copying
@@JuliusPerdana We'll see what the court of law says.
@@georgefaulk2528 lol whatever