Very difficult job by modifying all these pins and reconnect them. I must say to modify a board by replacing by another. You must have a good knowledge about. It takes years of knowledge to achieve success. Well done. Am a beginner and learning. ❤️🙏
does it has this universal mainboard and tuner for digital channels or plug to connect the antena? furthermore how can identify if its suitable for the lvds of display of my tv its cx320dledm
@@tevzTVTevatronics thank you! so.. now knowing the firmware is flashed correctly, i'm worried since my screen only lits but there is no image. the light is working fine, so im assuming the inverter is not the problem, the screen powers on and off, but only the light, there is no image. any suggestions? thanks a lot.
@@tevzTVTevatronics I tried all the firmware of my board version, but none of them worked, my usb is in fat32 and even then I could not install the firmware
That was a real tough job. A lot of work.
Very difficult job by modifying all these pins and reconnect them.
I must say to modify a board by replacing by another.
You must have a good knowledge about.
It takes years of knowledge to achieve success.
Well done.
Am a beginner and learning.
❤️🙏
Good knowledge starts in the beginning.
@@tevzTVTevatronics yes sure.
Good job sir tevz
👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
Idol I'm watching
A question: In a Lg lcd tv ADJ is paired with A-DIM or P-DIM
Nice lods
Thanks
does it has this universal mainboard and tuner for digital channels or plug to connect the antena?
furthermore how can identify if its suitable for the lvds of display of my tv its cx320dledm
hello where do you find the software
Its in the description below.
how long does it flash before i unplug the usb drive? its been 5 minutes and it doesnt stop flashing
It doesn't stop from flashing when the time that will get faster flashing that means is complete installing.
@@tevzTVTevatronics thank you! so.. now knowing the firmware is flashed correctly, i'm worried since my screen only lits but there is no image. the light is working fine, so im assuming the inverter is not the problem, the screen powers on and off, but only the light, there is no image. any suggestions? thanks a lot.
@@nataliaa5997 Check the LVDS cable is connected correctly. and the firmware is for 1024X768, or 1920X1080.
Very interested! Pano pag yung BLON is 5volts lang with the stock inverter.. Magkakaissue ba? I am assuming that those board use 12 volts for BLON
3 to 5 volts karamihan sa bl on.
@@tevzTVTevatronics thanks! So dito sa universal board na to 5v din yung output nya?
@@rendelapenajr9706 bl on nia 4 volts yata. Hindi problema yan, may mga bl on minimum voltage of 2.5 volts.
Hi teps I like ur video's I am only technician for south africa big up I wish sometimes I can meet you or contact you.
I am Tevz not teps. Shoutout
lumkile mbangula. Try to contact mi in my Face book page.
V53 vs V56 vs SK105A vs SK106A
What's the difference?
I don't notice, is only the software maybe.
Meron palang kabitan ng speaker don sa kinabit mo ng driver board.may tuturial kb kung paano mag download sa usb ng firmware.
Salamat sa pagsagot sa tanong ko.God bless po
ua-cam.com/video/kNLV-YL0GFU/v-deo.html try mo
Hi, I have the same board and the light does not blink when the usb is put in, nothing happens, you know if there is any solution
Format the usb to fat32, if you flash it make sure you dont flash it the same firmware,
@@tevzTVTevatronics I tried all the firmware of my board version, but none of them worked, my usb is in fat32 and even then I could not install the firmware
@@marcosmorales4694 try another usb drive
I plugged my USB (2 files copied to USB FAT32 format), but why red LED blink every 8 seconds?
It should be blinking every second. The board may have a problem. Or check the power supply and the connection of the LVDS.
Paano ekokonect yung audio or speaker
ua-cam.com/video/kNLV-YL0GFU/v-deo.html yan ang gawin pag wala connector.