Thank you! My K-Elite would power up, try to start brewing coffee and then shut off completely with no power. I watched your video and unclogged everything with a paper clip. She is back up and running! Did this all at 5:30AM desperate for a coffee 🤣🤣🤣 thank you!
@@sweetcaroline1125i unfortunately took the whole machine apart because I was sure I was having a power issue. I realized mine was just clogged up. I believe it was shutting down as a safety mechanism. I unclogged it and it started running like normal. Use a paperclip 📎 like in the video. It worked for me, good luck!
Thanks so much. I was having the same problem with my Keurig, so I researched UA-cam for a solution and found your video. It totally solved my problem and my Keurig is back in business. Thanks again.
THANK YOU! Great video. I didn't know how to pop that bottom k cup holder out... our Keurig wasn't working and my wife had it in a bag to go back to Target. I watched your video... straightened a paperclip and cleaned out both needles - Voila! All working well again! THANKS.
I used your paperclip strategy. Although I did not see any grounds stuck anywhere voila! my Keurig is working again. Thanks. Two days without coffee is enough!
Thank you! Not joking, I almost threw this thing out. I literally emptied the tank, unplugged it and had it sitting by the back door. Working like a champ again.
Wow! I really taught I was going to buy and spend on a new $ 300 Machine. The one I have was a gift to me. I saw it on Amazon $ 300. THANKS SO MUCH!! Blessings 🙏
Thanks for this video! Was clogged not pouring any coffee. One day was perfect one day clogged! Driving my a bit crazy 😂. Bc the water always came out with no coffee inserted. But when I punctured the bottom twice, it would come out. With no coffee grinds now after using the paperclip method, it works just like it was new. Thank you for the information. I truly appreciate it. Stay blessed take care.
I was having coffee grinds all over my keurig as well. It took me about 45 minutes to clean my machine. We must have a hard water going forward. I did make sure that the needles were clean as well because I have seen the needle to where it was dark. I did not even know that it had holes in it.😂 that definitely worked for my Keurig🎉 thank you very much👏🏽😊
This video had nothing to do with my problem but it solved my problem anyway. While showing how to clean the pins I noticed that the bottom part of the K-cup holder looked different than mine. When I looked I found that mine had detached. I probably didn't put it back together properly the last time I cleaned it. So thank you for unintentionally solving the problem I was having.
_My duo is almost 2 yrs old. Never used the carafe side. Recently it started to do a weird thing that I can’t find a fix for. When I do the usual, it will fill hot water to the correct size into my mug & everything else works, no visible leaks to the outside, except it’s not going thru the k-cup. I’ve done descale maintenance & all. No luck. The only thing I haven’t done is taken it apart._ 😫
I was looking for help on a different issue (kinda similar tho) and somehow this had me check my needle and realize how raunchy it is. What I thought was a scaling issue turned out to be a dirty needle/top. Thanks for saving my day!!! 😅
Thank you so much for your help! My problem was a plugged lower needle that I was able to clear with a paperclip just like you said. My Keurig works again!!
My Keurig acts like it has a plugged lower needle. I believe that the K cups are not being pushed down far enough or that the needle has receded a bit. The needle punctures the bottom of the k cup but it doesn't push the K cup far enough to allow the coffee to go through the needle orifice. Thanks for the great video.
I had the exact same experience. Coffee grounds all over, water splashing all over. - Poked something through the spouts, now it works fine. - Definitely seems like grounds got into the spiggets.
Help please?! How to fix the arm on a K2.0 -500 model that is now discontinued? It’s stuck in the up position and won’t push down. Love this model! It features a touchscreen, 60oz tank, more importantly can be set to turn on/off, brew strength, water heating for tea/Cocoa, 4,6,8,10cup options. My point is they don’t make a similar model, none that will stay on with set on & off time. Are there Keurig repair professionals out there to take it to? Love my old Keurig!! Thanks😊
I have a model B77. If dispensing clear water (example, for tea) it works perfectly filling cup as necessary for size selected. However, with K-cup inserted, it will fill differently every time and usually only 1/4 cup even though large cup was selected. No extra water goes thru the diverted valve back to the reservoir when this happens. The check valve was disassembled and cleaned, works well. It is as if the water pump does not have sufficient pressure to force water thru K-cup. Any suggestions? Dan
4:50 pm coffee grinds all over, gave it a good clean still did not work! Shuts down. Went and bought a brand new one and it’s doing the same thing! Same model. Keurig Elite model
I've had my original classic Keurig machine for over 10+yrs now with no issues. The first ones my friends bought when they first came out gave up replacing them. WHY? WHAT WAS THE PROBEM WITH THEM? Because most people turn the power on & off when going to make a cup(s) and the heater switch is (or was) being used everyday or every use to turn the machine on & off, and the heater switch burns out quickly that way being turned on & off so often. Not sure if Keurig ever fixed this problem, after it happened to me with my first machine that only lasted a year, from then on I just KEET THE MACHINE ON EVERYDAY AND NEVER TURN IT OFF. The lights are all that stay on power wise just like any old coffee maker pot clock. I keep the tank full always with fresh water (unless going away for a long period), and I've never had a problem with the machine in over 10ys+. I clean it twice a year & descale it easily within an half hour at most.
When using those fill your own cartridges in model B30 , it will pop open before the brewing is complete and the force is strong enough to jump the cartridge out of the holder. Have you had experience with this? Thank you.
I have a 2.0 keurig and the water comes out but not in a stream it’s going everywhere.. was in storage everything else works all displays but which hole actually should go to top or just HELP!!!! Live it and am not ready to throw away!!
Try pulling your black gasket around the top needle down a bit. I think I pushed mine up when wiping it down as I do once a week and man, I was getting so frustrated! I have a k cup drawer under my machine so everytime it would splash, it was a HUGE mess! Good luck! Our machine is 10 years old and I don't want to throw ours away either 😆
what do you do if the needles become dull that it doesn't pierce the bottom of the pods? is there a way to sharpen it or do you have to replace the whole unit cup holder?
Don’t rotate the k-cup if you want to reuse it just lift and close the lid and choose the desired amount. You get grounds because that k-cup has already been pierced if you rotate the k-cup it’s going to get pierced in different places and the grounds are going to “escape” and make a mess.
My coffee keeps tasting really weak. I have done cleaning Cycles and there are actually not many grounds when I do the cleaning. What causes weakness with it when the K-Cup already appears to be clean
I have the same issue, the coffee was tasting great, then I descaled with vinegar, suddenly the coffee was weak and watery. I cleaned the needles, they didn't seem to be clogged. Called customer support, they told me to descale again, I did, it maybe helped a tiny bit but I still haven't gotten back to the great coffee flavor I was getting before I descaled. I wonder if maybe the water is not hot enough so it's not bringing as much flavor out of the grounds?
I did this needle cleaning technique a few weeks ago and it worked, but today the issue came back (noise, but no water came out) and this time it didn’t work. I repeated the steps a few times and it hasn’t helped. Please help if you have another suggestion.
We got a brand new Keurig and we used it 3 times only, and the coffee grains started spilling everywhere inside of the coffee and fully loaded where we put the coffee K dispenser. I’m going to try the paper Clío cleaning, although, we used it only 3 times and it’s already doing this mess. I hope it works
My Keurig has been descaled with vinegar, and descaling solution, I have the many flows of water the problem is to descaling light refuses to shut off I don't know what to do. I've already done make sure with a needle everything was cleared everything's all good. Any solutions
My keurig is making weak coffee it flows too much water way too fast. I’ve done what you did. I took it apart, cleaned out all the needles and cleaned out that whole section and it’s still making wheat coffee. What’s up?
The same thing happens to mine. They run clear when there's no K-cup in there but when you put the K-cup in the water goes in the k-cup but it doesn't come out so the grinds bubble up through the top of the K-cup. I even replaced that first basket you pulled out even though it wasn't clogged. It still does it. It makes no sense the water goes into the K-cups and won't come out but rushes through the machine without a K-cup in place. I've had this happen on 2 previous machines and just end up replacing them. They only last about a year.
My keurig shuts off when I place a kcup in. It works without anything in it to just give hot water but the minute I place a kcup in it shuts the whole machine down (off...lights out)
Thank you! My K-Elite would power up, try to start brewing coffee and then shut off completely with no power. I watched your video and unclogged everything with a paper clip. She is back up and running! Did this all at 5:30AM desperate for a coffee 🤣🤣🤣 thank you!
What did you do to fixit?
@@sweetcaroline1125i unfortunately took the whole machine apart because I was sure I was having a power issue. I realized mine was just clogged up. I believe it was shutting down as a safety mechanism. I unclogged it and it started running like normal. Use a paperclip 📎 like in the video. It worked for me, good luck!
Paper clip worked for me, as well. Thanks!!
always keep a jar of instant coffee on hand in case the Keurig stops working
Thanks so much. I was having the same problem with my Keurig, so I researched UA-cam for a solution and found your video. It totally solved my problem and my Keurig is back in business. Thanks again.
Glad I could help!
THANK YOU! Great video. I didn't know how to pop that bottom k cup holder out... our Keurig wasn't working and my wife had it in a bag to go back to Target. I watched your video... straightened a paperclip and cleaned out both needles - Voila! All working well again! THANKS.
I used your paperclip strategy. Although I did not see any grounds stuck anywhere voila! my Keurig is working again. Thanks. Two days without coffee is enough!
Thank you! Not joking, I almost threw this thing out. I literally emptied the tank, unplugged it and had it sitting by the back door. Working like a champ again.
Oh Lord thank you. The plastic part was clogged. Thank you so much. I almost through this bad girl out the door.❤❤❤❤❤❤
Thank you! I sat on a totally useless call with Keurig support, WAY too long and got nowhere. I watched your video and fixed my machine immediately!!
Wow! I really taught I was going to buy and spend on a new $ 300 Machine. The one I have was a gift to me. I saw it on Amazon $ 300. THANKS SO MUCH!! Blessings 🙏
They’re $89 at target!
Thank you! That was simple and easy. Great video. No over talking you’re clearly out to help - not just get views!
Glad you liked it!
Out of 5 videos and a disassemble 😂this is the one that did the trick. Thank you
-Model K84
This helped me. I used the paperclip on the upper needle and my Keurig now works!
Thanks for this video! Was clogged not pouring any coffee. One day was perfect one day clogged!
Driving my a bit crazy 😂.
Bc the water always came out with no coffee inserted. But when I punctured the bottom twice, it would come out.
With no coffee grinds now after using the paperclip method, it works just like it was new. Thank you for the information. I truly appreciate it. Stay blessed take care.
Life saver thank you !!!! This is my second keurig that stops working!
I was having coffee grinds all over my keurig as well. It took me about 45 minutes to clean my machine. We must have a hard water going forward. I did make sure that the needles were clean as well because I have seen the needle to where it was dark. I did not even know that it had holes in it.😂 that definitely worked for my Keurig🎉 thank you very much👏🏽😊
This video had nothing to do with my problem but it solved my problem anyway. While showing how to clean the pins I noticed that the bottom part of the K-cup holder looked different than mine. When I looked I found that mine had detached. I probably didn't put it back together properly the last time I cleaned it. So thank you for unintentionally solving the problem I was having.
I didn’t have coffee for a week so I checked out this video worked great ! Thank you so very much
Thank You! I was going thru caffeine withdrawal cuz the machine wasn't working. The paperclip tip did the trick.
Helped me out man. Just fixed an issue I’ve been having for days with your video 👏🏾
Extremely helpful. I unclogged my Keurig and it's good as new!
Thank you brother. Ran a paper clip through the holes and I’m back in business! 💯💯💯
_My duo is almost 2 yrs old. Never used the carafe side. Recently it started to do a weird thing that I can’t find a fix for. When I do the usual, it will fill hot water to the correct size into my mug & everything else works, no visible leaks to the outside, except it’s not going thru the k-cup. I’ve done descale maintenance & all. No luck. The only thing I haven’t done is taken it apart._ 😫
I was looking for help on a different issue (kinda similar tho) and somehow this had me check my needle and realize how raunchy it is. What I thought was a scaling issue turned out to be a dirty needle/top. Thanks for saving my day!!! 😅
This really helped me out and also saved me money. Thanks for taking the time to make this video!
keep with us by subscribed
Thank you so much for your help! My problem was a plugged lower needle that I was able to clear with a paperclip just like you said. My Keurig works again!!
5:56 am thank you your video got my keurig cups working. Thank you so much😊
Thanks!!! Unclogged and now works fine!
This video was very helpful....I got my machine working again. Thanks!
My Keurig acts like it has a plugged lower needle. I believe that the K cups are not being pushed down far enough or that the needle has receded a bit. The needle punctures the bottom of the k cup but it doesn't push the K cup far enough to allow the coffee to go through the needle orifice. Thanks for the great video.
I had the exact same experience. Coffee grounds all over, water splashing all over.
- Poked something through the spouts, now it works fine.
- Definitely seems like grounds got into the spiggets.
This fixed my issue!! Thank you very much for posting this video sir!!! Thought I was gonna have to invest in a new coffee maker!
How about when the lights just stays on and nothing happens
All my lights stay on and nothing happens
😢 same with my kduo
same
Mines doing that rn too
Mines doing it too
❤❤❤❤ this word for me couldn't see anything clogging the needles but there must have been something there cuz it works now.
Help please?! How to fix the arm on a K2.0 -500 model that is now discontinued? It’s stuck in the up position and won’t push down. Love this model! It features a touchscreen, 60oz tank, more importantly can be set to turn on/off, brew strength, water heating for tea/Cocoa, 4,6,8,10cup options. My point is they don’t make a similar model, none that will stay on with set on & off time. Are there Keurig repair professionals out there to take it to? Love my old Keurig!! Thanks😊
Lift arm look under you will see what I call a lip with a square indentation,lightly pullon it while lowering should shut then.
Worked for me.
This was enormously helpful. Thank you for posting.❤😊❤
Glad it was helpful!
Thank you so much! Following your vedio step by step, my Keurig works again!
Glad it helped!
It worked like a charm! :) Thanks for the helpful vid.
Thank you this fixed my problem with grounds in my coffee. mind was plugged on the bottom needle also.
You saved me at 3: 30 a.m.. Thanks man
Thank you so much!! This trick did the trick so easily
Your video clip helped me fix that very problem. Thanks!
Excellent video! 👍
Absolutely helped me out
Mahalos! 🤙🏾
You saved my Keurig!!!! Thanks so much!!!😊
Glad I could help!
Awesome, just fixed my Keurig. It wasn't pumping any water so, I follow your tutorial and Voila! It worked. Thank you!
Finally an answer to my problem. Thank you
Thanks,I almost bought a new one ,this fixed it instantly
My last shot at effective descaling/unclogging was to run through water just short of boiling ...That did the trick! be careful...but it worked!
god bless u for fixing my coffee machine sir
I have a model B77. If dispensing clear water (example, for tea) it works perfectly filling cup as necessary for size selected. However, with K-cup inserted, it will fill differently every time and usually only 1/4 cup even though large cup was selected. No extra water goes thru the diverted valve back to the reservoir when this happens. The check valve was disassembled and cleaned, works well. It is as if the water pump does not have sufficient pressure to force water thru K-cup. Any suggestions?
Dan
Same issue for me. Did you find a fix?
Paperclip method worked 100%. I was about to throw it out, and purchase another.
Thank you so much could you please get me some information about the Replacement Part Cup Holder Needle For Keurig B60 thank you 😊
Your the man!!!
Was plugged up big time but thx to your guidance,
It solved the problem!!!
👍🏼
Thanks. After descaling, it was still clogged. The paper clip worked for me. Very happy coffee drinker here❤
4:50 pm coffee grinds all over, gave it a good clean still did not work! Shuts down. Went and bought a brand new one and it’s doing the same thing! Same model. Keurig Elite model
Hi, what can i check for if mine does not light up at all, i have 120v to it though, is there a circuit breaker or fuse i can check? Thanks.
I'm always getting coffee grounds in my coffee maybe my lower needle is clogged thankl for the info😊
Do you have a link to kcup substitute you use with regular coffee grounds?
Yay...paper clip worked for my issues!!!
THANK YOU THANK YOU THANK YOU 😊 ☕💛
Thank you so much,now mine works!!!
I'm having a issue w water coming out for the pops but will work when I make a pot of coffee
Thank you for this. It helped me a great deal.
I've had my original classic Keurig machine for over 10+yrs now with no issues.
The first ones my friends bought when they first came out gave up replacing them. WHY? WHAT WAS THE PROBEM WITH THEM? Because most people turn the power on & off when going to make a cup(s) and the heater switch is (or was) being used everyday or every use to turn the machine on & off, and the heater switch burns out quickly that way being turned on & off so often. Not sure if Keurig ever fixed this problem, after it happened to me with my first machine that only lasted a year, from then on I just KEET THE MACHINE ON EVERYDAY AND NEVER TURN IT OFF. The lights are all that stay on power wise just like any old coffee maker pot clock.
I keep the tank full always with fresh water (unless going away for a long period), and I've never had a problem with the machine in over 10ys+. I clean it twice a year & descale it easily within an half hour at most.
It worked!!! Thank you so very much!!!
When using those fill your own cartridges in model B30 , it will pop open before the brewing is complete and the force is strong enough to jump the cartridge out of the holder. Have you had experience with this? Thank you.
Thank you, it worked, I was about throw it out.
I have a 2.0 keurig and the water comes out but not in a stream it’s going everywhere.. was in storage everything else works all displays but which hole actually should go to top or just HELP!!!! Live it and am not ready to throw away!!
Try pulling your black gasket around the top needle down a bit. I think I pushed mine up when wiping it down as I do once a week and man, I was getting so frustrated! I have a k cup drawer under my machine so everytime it would splash, it was a HUGE mess! Good luck! Our machine is 10 years old and I don't want to throw ours away either 😆
what do you do if the needles become dull that it doesn't pierce the bottom of the pods? is there a way to sharpen it or do you have to replace the whole unit cup holder?
the top needle is hollow and where the water goes into the k-cup ream that out with a paper clip as well
Thanks Carlos! Very helpful
Wait what if it's leaking from the top?can you post a video on that I need answers
Don’t rotate the k-cup if you want to reuse it just lift and close the lid and choose the desired amount. You get grounds because that k-cup has already been pierced if you rotate the k-cup it’s going to get pierced in different places and the grounds are going to “escape” and make a mess.
Thank you! Looking for paper clip now.
I did all of the things and it works again! No idea exactly what or how, but ok. Lol.
GREAT VIDEO ❗❗❗❗❗
My coffee keeps tasting really weak. I have done cleaning Cycles and there are actually not many grounds when I do the cleaning. What causes weakness with it when the K-Cup already appears to be clean
I have the same issue, the coffee was tasting great, then I descaled with vinegar, suddenly the coffee was weak and watery. I cleaned the needles, they didn't seem to be clogged. Called customer support, they told me to descale again, I did, it maybe helped a tiny bit but I still haven't gotten back to the great coffee flavor I was getting before I descaled. I wonder if maybe the water is not hot enough so it's not bringing as much flavor out of the grounds?
Thank you! This was the perfect fix!
I did this needle cleaning technique a few weeks ago and it worked, but today the issue came back (noise, but no water came out) and this time it didn’t work. I repeated the steps a few times and it hasn’t helped. Please help if you have another suggestion.
My lid will not close I can hold my finger on the button under the k express but how can I make the lid close to fix it so I can have my coffee 😢
Well done Carlos, thank you.
My K cup fills with water. The bottom needle doesn't poke a hole. This just started. 😢 Advise please.
I had that problem....turned out it was a faulty cup, no filter material was installed during production! Had to clean up, what a hassle!
We got a brand new Keurig and we used it 3 times only, and the coffee grains started spilling everywhere inside of the coffee and fully loaded where we put the coffee K dispenser.
I’m going to try the paper Clío cleaning, although, we used it only 3 times and it’s already doing this mess. I hope it works
The handle you lift to put k cup in is stuck in up position.what can I do?
AWESOME !!!!! FIXED IT 👍THANKS
keep with us by subscribed
Thank u so much mines working again ❤
Power light on but, display lights off. Black wire got pulled out while removing outer cover. Don't know where it connects too.
It worked for me thank you very much for the city of
I bought a brand new one and water wouldn’t pour. I followed these instructions and Bam we have coffee. Thanks.
My Keurig has been descaled with vinegar, and descaling solution, I have the many flows of water the problem is to descaling light refuses to shut off I don't know what to do. I've already done make sure with a needle everything was cleared everything's all good. Any solutions
It took me around 10-15 descaling processes for the light to turn off
How come needles won't puncture the k cup?
My keurig is making weak coffee it flows too much water way too fast. I’ve done what you did. I took it apart, cleaned out all the needles and cleaned out that whole section and it’s still making wheat coffee. What’s up?
My k elite has a descale light on but want descale or do anything plz help me!!!
This is great. I have also found a product called Kup-Lift to stop that annoying splashing.
The same thing happens to mine. They run clear when there's no K-cup in there but when you put the K-cup in the water goes in the k-cup but it doesn't come out so the grinds bubble up through the top of the K-cup. I even replaced that first basket you pulled out even though it wasn't clogged. It still does it. It makes no sense the water goes into the K-cups and won't come out but rushes through the machine without a K-cup in place. I've had this happen on 2 previous machines and just end up replacing them. They only last about a year.
Thanks this really helped W video ong
Thank you worked perfect.
In what universe does this "...Fix *All* Keurig Problems..."?! It did not address the problems that my machine is having.
me neither - mine has stopped an even flow
Greatly appreciate it I just learned something
hello friend, how are you, my coffee maker of this model is not clogged and coffee is not coming out, do you know what it could be?
What happens when the D scale process does not work on the Keurig coffee pot?
My keurig shuts off when I place a kcup in.
It works without anything in it to just give hot water but the minute I place a kcup in it shuts the whole machine down (off...lights out)