Web admin interface of the Zyxel VMG8825-B50B router.
Вставка
- Опубліковано 4 жов 2024
- **Please Subscribe: UA-cam have required creators, like me, to have at least 1000 subscribers! I worry that they will up the minimum in the future too so every subscriber is gladly welcome.**
The website admin pages of the “Zyxel VMG8825-B50B” router.
The same interface is used with any Zyxel router running the Opal platform. This includes:
EX3301-T0 (DX3301-T0)
VMG8825-T50
EX5601-T0
EX5401-B1
DX5401-B0
DX5301-B2
AX7501-B0
Shows the following:
1:24 - Device status and connection speeds of things connected to it.
2:44 - Parental control settings and initial setup
3:45 - Broadband settings including how to configure the router for BT Openreach/Wholesale based ADSL or VDSL (FTTC)
5:00 - Cellular backup settings.
5:47 - Advanced VDSL settings such as PhyR.
6:01 - Wireless settings and configuration.
6:52 - Guest Wi-Fi settings.
7:41 - Wireless MAC Authentication / restrictions/ blocking.
8:01 - WPS settings.
8:56 - Channel Monitor / Channel Status / Channel scan.
9:25 - Wireless LAN Scheduler (turn wifi off at night).
10:19 - LAN IP and DHCP Settings.
11:55 - Static routes.
12:31 - QoS
13:28 - Port forwarding
14:19 - DMZ
14:42 - SIP ALG, PPTP and IPSEC ALG.
15:10 - NAT Sessions limits
15:45 - DNS Override / static entries.
16:31 - DynDNS / Dynamic DNS
16:57 - IGMP / MLD
17:11 - VLAN Group
17:27 - Interface Grouping
17:41 - USB File Sharing.
18:00 - Firewall Settings.
18:33 - LAN MAC Filtering
19:11 - SIP / VoIP Phone Settings.
21:14 - System and Security Log.
21:21 - Traffic Status
22:10 - VoIP Status
22:28 - ARP Status
22:35 - Routing table.
22:56 - DSL / xDSL / VDSL statistics.
23:14 - WLAN Status
23:49 - Cellular status
24:05 - User accounts
24:33 - Remote management and WAN Ping.
24:54 - SNMP settings.
25:05 - Time and date settings.
25:23 - Email alerts.
25:53 - Log settings and email of logs.
26:10 - Firmware upgrade.
26:17 - Backup and restore and factory reset
26:24 - Reboot router.
26:36 - Diagnostics, traceroute and ping tests
How to factory reset the router: • How to factory reset a...
General overview of the router: • A look at the Zyxel VM...
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Thanks for this I'm about to be connected to the B4RN fibre network and I believe this will be the supplied modem. Hopefully it will be faster than my 1.0mb connection over BT copper!
It will be bliss. If it isn't; comment here and I'll do my best to help. I can certainly help with router questions and can probably help with B4RN service questions. B4RN may be installing DX5301-B2 routers by now. Same web interface though.
I'm jealous; I get full speed 80/20 FTTC but I'd love to be on gigabit symmetrical and real fibre to the house.
@@freename Thanks for the information I'm located in eastern Cumbria and have tried various connectivity solutions including satellite ,this finished due to a satellite change being masked by the terrain here. Presently using EE 4g but it can die from time to time for no reason. A big reccomendation for Poynting anttennas if your in a poor location. I'll let you know which hardware I get.
@@twozerouk Satellite has never been a good experience. Starlink goes a long way to fixing that with 100mbps+ speeds on download and a viable ping time but still has dropouts which seem to be more regular than a good 3G/4G connection. Hope it all goes well.
Thank you so mutch!
:)
Hi there how long does the router store logs?
Btw helpful becoz I also have zyxel router 👍
Thanks :)
A bridge mode tutorial could be really usefull!Great vid mate
Might be different depending on the ISP you are using it with. What ISP ?
@@freename I resident in greece my isp is Wind though!I think is going to be the same because it also uses VOIP.Its similar with uk almost. xDSL
@@MrTaiman1 I'm not fully sure on DSL. I've only ever bridged that router using Routed Ethernet on the fibre / SFP port.
@@freename oh i see thanks anyway for the reply!
@@freename Is it possible to see a history of devices that connected to my router and for how long?
A video showing how to enable ipv6 tunnelling would also be good
With which service? Tunnel broker?
10:33. Can I use an IPv6 suffix value like '::1' in the Manual option of ''LAN Global Identifier Type", or it should be defined in full like 'a:b:c:d::1'?
My zyxel router came in new and all the passwords are different. I even rested the router 7 times That's still not the same passwords as what it shows on the label on the router. Have any thoughts on what should I do?
The ISP who supplied it has the option to put on their own default settings which may have different passwords. You can ask the ISP. The only option beyond that is to open the router and use a serial console to try and clear the config partition, by no means easy.
Is there a way to reset the password of the admin hub without the actual password needed?
That would defeat the reason to have a password! There is the users destructive way: Stabbing the factory reset on the router and then using it's default admin password on the back. This will have reset all the custom settings on the router.
Or if the router was provided by an ISP they may have TR-069 or supervisor access to the router and can reset the password without losing your custom settings.
hello. Nice setting interface tour.
Can i ask you if the wifi connection of this modem/router is good or had any issue ? Thanks
I would say that out of 100 routers I've had 5 with ongoing issues. The others might not have noticed the issues or do not have the issues. The main problem appears to be the 2.4GHz wifi going strange and not accepting the password even though it is correct. Often during this time just the 2.4GHz wireless light flashes orange (which isn't documented, Zyxel don't know what it means).
Both flash when you use the WPS button but nobody seems to understand what a single one going orange means.
I'm not yet sure if I would buy this router for my own use.
When i enter ip on my phone, it says unsafe website. Not to enter any info. Ignore it or new router? Its a new one i switch to fiber. Thanks in advance
A local IP can never have a legitimate certificate so that certificate warning is expected. It's fine to bypass it on the router but never do that if you visit a real website and get that kind of message!
I have a Zyxel XMG3927-B50A router (same interfacel, how do i get the log feature to show attacks?
I get the following message "It is impossible to retrieve the information now. Please try again"
Ive been in the Log Settings, which boxes do i need to tick & should i enable Syslog Logging > Remote or Local File? Or is it not needed to see it in the GUI interface?
Last time i got the Log working it showed i was getting attacked by Russian bots. I posted about it here:
forums.thinkbroadband.com/security/f/4666509-zyxel-security-log-attack.html#Post4666509
I don't know the answer to your question but I can throw in my thoughts about "attacks". Unless you are doing something particularly nasty on the internet there should be no reason that you would be specifically attacked. Stuff will be scanning the entire internet all the time so you will always see uninvited connection attempts to your router.
Unless you port forward or UPNP forward stuff through to internal things on your network these connection attempts will just drop and go nowhere. They won't be high enough volume to cause connection problems or slow downs of your internet.
Summary: It is more trouble worrying about it than it is worth. Unless you are in the business of intentionally annoying people on the internet whilst also somehow giving away your IP address to those you annoy..
@@freename I just use the Internet for browsing, im not a gamer, if you look at the response on the Think broadband forum
"If a hacker can potentially control a router they can use it to bounce their traffic, and it makes you look like the source of attacks. Or, they can use it with others to attempt DoS attacks on bigger targets...
Strictly speaking it's a reconnaissance for an attack but they didn't get in this time. Interestingly, had they got in, there would have been zero evidence in the logs as the router isn't logging allowed traffic."
@@freename That leaves me with the issue of why my logs are not showing? Ive enabled everything you have in the log settings.
Hi. Brilliant videos and I feel confident you can help as you also have experience with the THREE 5G home broadband device. From watching your other Three video I bought a similar router "Zyxel WMG8924-B10A! to go with the ZTE MC801A. I have tried various things, Double Nat, Bridge Mode etc. I am struggling to get the Zyxel to act as the DHCP server and wonder if you can give me some ideas and tips. Thanks (A new subscriber)
Describe the setup which isn't working.. ? You've got the three router set in bridge mode and then a network cable going between the three router and the wan port of the zyxel? The zyxel is then just configured in factory defaults?
do you know why i cant find broadband settings page on the ZyXEL website? when i go to network settings all i can see are Wireless, Home Networking, QoS, NAT, DNS and USB Service. trying to set up a new WAN but i cant exactly get to the page
What ISP provided your router? I know B4RN and other providers hide some of the pages.
Hi, so the router keeps capping my speeds at 100 m and says wan 100m/full even though I've tried several cat 5e and cat 6 cables. Can you please assist.
What are you plugging it in to?
@@freename from the ont to the router
What make and model is the ONT?
I have recently installed this router and my communication devices (iPad, iPhone etc) are connected but I am unable to connect other devices such as printers, Smart TV, Apple TV etc. When I enter router password on a printer the connection fails. The connection printout states: SSID Check; Communication Mode-Check; Security Mode-Check; MAC Address Filtering-Fail. There is then no connection. Any ideas as to any settings I need to change? Incidentally all devices connect readily to another network that I have.
Change the name of the 2.4GHz or 5GHz in the admin interface of the router and see if the printer or other devices are failing to connect to a specific frequency? Which ISP gave you the router? Which firmware version is it running?
Mine is way more basic than this there is no NAT tab which I need to access any ideas?
Which ISP are you with? Which username are you using to log into the router? And is it in bridge mode?
Great guide! How can I use this Zyxel as "modem only" in bridge mode for a FritzBox 4040 router cascade?
Which ISP?
@@freename I'm in Italy, Wind3 as ISP. Configuration parameters are the following:
VLan: 835(data)
VLan: 836(voice)
Protocol: PPPoE
PPPoE usr: benvenuto
PPPoE pwd: ospite
Encapsulation: LLC
NAT: enabled
COS data: 0 (IEEE 802.1 P)
COS voice: 5 (IEEE 802.1 P)
3:40 - does your ISP let you get to this screen.. the Broadband screen. If yes, what can you see?
Hi could you plz show how to put your router into bridge mode ready for Lila fibre thanks.
Bridge mode on these routers can be tricky. Best to ask your provider about it.
how to make your modem router as modem only and set as bridge mode my model is VMG3625-T50B n my isp is te data from cairo egypt
3:45 - Go to this page and then click the edit next to the connection your ISP uses.
Then in the Mode: box change it from Routing to Bridged.
You will also need to make the following changes:
Disable DHCP on the Zyxel
Disable IPv6 on the Zyxel
Disable UPnP on the Zyxel
Disable both 2.4GHz and 5GHz WiFi signal from the Zyxel
Enable bridge on the WAN interface.
Out of interest, who is your ISP?
Can you put the zyxel VMG8828 or similar in bridge mode so you can use your own router?
If its similar to the 8825 and your ISP (if supplied by them) have not locked down the function then yes, it can bridge.
I don't have access to the whole menu, why? :(
If it was provided by an ISP they have a function to hide some of the pages. Which provider did the router come from?
Where can I find the firmware? It is impossible to find on the Zyxel website.
Only your ISP can provide the firmware for this router. Or if you are the ISP, ask your vendor.
I have the same but the B50A, how do I open the ports? And is it port 80 for a ps5?
You shouldn't need to port forward, especially port 80!, for a game console. I presume they mean you need port 80 "open" outbound. It would be insane to require prot 80 for a game console inbound.
Hi! How do I turn on visited websites IP since when I’m going to log I see “dhcp sending discovery” in place of IP?
I wouldn't have thought the router can log or record the IP of each website you visit. DHCP is to do with the way your router gets its internet IP from your ISP.
So there is no way to track visited websites IPs? On zyxel router?
@@martynaszypua4171 Not that I know of directly on the router with the stock Zyxel firmware. There are many other ways such as if someone is running their own DNS server (pihole maybe?) on the network or is sending DNS off to somewhere like OpenDNS which allows you certain reporting and parental control on lookups.
what to do when I block a device then Zyxel tells " Set not successful, Please try again " ? how to fix this? TIA
Which section are you in for the blocking?
@@freename I'm trying to block it just on the Connectivity section in wireless option, when clicking " Internet Blocking > clicking Save > it says " Set not successful, Please try again " "... haven't try to block the mac address yet..
@@vondecastro9301 Not sure, seems to work ok for me. This is under Wireless --> Mac Authentication. Am I in the wrong section ?
hi.
how to hard reset emg3525-t50b?
I was tried , but don't work
I do not know but it is possible the ISP have set a "ROMD" on the router so any ISP based settings stay the same. If you change the WiFi name and then reset does the WiFi name go back to normal? (That would indicate if the ROMD is the problem).
How do I bridge two Zyzel routers Wirelessly ? EMG3525-T50B
I doubt that is a function, though I've not seen your specific router to know. Having seen lots of zyxels, I've not seen one with client or client bridge mode WiFi.
Hello I was wondering if it's possible to manage/limit bandwidth usage on certain devices? I'm using a router with a similar interface as this one.
12:31 are the screens you need.
@@freename hello, thank you replying.
Yeah I saw this section and figured it was this but honestly this is so confusing to the last router I used that had the option to just add a device and set a limit to their upload and download.
I clicked on queue setup and there is already an automatically configured queue setting set to "SP" and idk what thay or any of the other tabs mean
Question. I have a Zyxel 8825 B50B on fibre connection. I want to connect a TP-Link Deco XE75 router and have this act as the DNS server and the ZYXEL as just modem. What setting/s need to be changed to achieve this in the settings on the Zyxel. (i.e Bridge/Modem mode). Secondly should I connect Deco XE75 via the Zyxel WAN or LAN port? Your help on this would be most appreciated. Note: On my web interface there is no Broadband option in the Settings menu on the right. Is this because the Home Connectivity is in 'One Connect Setup' mode?
B4RN?
Yes. Good point. I’m guessing that the ISP manages the settings via an admin port which would explain the missing setting options. Next port of call B4RN. Cheers.
Your video tutorial on the Zyxel was very useful. 👍
B4RN definitely hide that page on their routers. I don't know what their official options are for bridging but there's lots of workarounds. If you need those, let me know ;)
In bridge mode your routers wan would plug into the b4rn routers LAN. The blue WAN port is unused
Do you have to open port 80 in order to have a remote management on WAN?
If you enable it in the remote management section you don't need to do anything else. No need to mess about in the firewall section..
Hello my Friend, thanks a lot for this video
But if possible, i need the best version of firmware, can you give me link
Firmware is annoyingly tightly controlled by Zyxel. You would need to speak to the ISP who supplied the router.
What firmware version are you currently running?
Good afternoon tell me please bought used Zyxel VMG8825-B60C can not go to the web interface I understood the provider disabled it, is it possible to flash in the base model where the interface 192.168.10.1 will be unlocked ?
Usually the default IP is 192.168.1.1 not .10.1
It would be unusual for the provider to turn the page off entirely. Are you sure you are just not accessing it correctly?
@@freename tried differently ,192.168.1.1 and 192.168.10.1 and many more like , but without success, and does it not be possible to somehow flash it through the web interface ? with a flash drive for example ..
@@freename maybe it has some kind of reset when you press a few buttons ?
ua-cam.com/video/U3MzTClzlMg/v-deo.html
Hi! Is there any way to see a network map on the Zyxel router? :D
Only a list of connected devices and how they are connected (top left square on the main page, then look at the tabs at the top) and a graphical representation of which ports are in use on the top right square on the main page and then on the top right.
It doesn't do LLDP(?) which is used to do the network map you may have seen on Windows Vista or newer. (Which can sometimes detect switches and which devices are off those switches etc.)
mingersoft.com/blog/wp-content/uploads/2011/07/Network-Map-Utility-in-Windows-7.png
I'm not sure that mapping function exists in windows any more ?
Hi there i was wondering if the logd would show up as an ip address or the actual contents on what was searched
Which log screen? And which website were you on? (The actual answer is if the site is HTTPS then nothing that is not the website or your computer can see what was searched.)
@@freename Hey thanks for the reply what I ment to say was let's say I search something on the wifi or go into a website (I only use google) will it show up on the zyxel log admin page as what it was searched or just a ip address?
And how long do these logs stay for?
It would, at most, only know you went to Google. (And then any website name you clicked on if you clicked a result). I'm not even sure it has the ability to log websites visited anyway.
@@freename oh ok how can I find out if it does?
And by any chance do you know how long these logs are kept for? Would they clear if the router had been unplugged then plugged back in?
Logs would be lost on router power cycle / restart. (If you are using the Zyxel router as your only router or server type device. If someone's installed a PiHole or similar to do blocking and custom DNS stuff. That could be logging domain names visited and would store it forever).
Hi, please where I can find the firmware version that you use in this router?
On the zyxel ftp.
Hi would it be possible to block wifi for my children from 9:00 pm to 6:30pm in the morning . What would I need to input in schedule? When I put 21:00 to 6:30 it comes with a error
Maybe do 2100 to 2359 (or 00:00) and then 00:00 to 0630 ? It might not like "spanning" the midnight mark for a single entry.
@@freename thank you so much sir
I have tried eveything now! I cant get into the interface! when I my ip is (192.168.10.1.) it says that it can't conect to the website I have tried for hours
pleas help!
Have you previously been able to get into the web interface? And are you trying the IP of your default gateway to bring up the web interface?
i open the ports and is closed whyy.... cant open the ports this modem?
Made sure you enabled it at the top? It is easy to add them and they default to not being enabled.
the problemwith Zyxel VMG8825-B50B router with firmware version V5.13(ABNY.2)C0 it'is cannot startup pc with wake on wan through forwarding port 7 or 9 in router because noway to config a static arp adress table and adding static dhcp ip adresses do not solve the problem. i know we can startup pc with entering to web interface of router and going to WOL in lan settings but is not pratical method.
other problem when the router return automatically to dsl connection from 4g backup or when the 4g dongle plugged in usb port and working in standby with dsl connection , the router keep the public ip adress from 4g dongle and not dispatch the new one to the ddns server from active dsl connection.
WoL: There might be a command line you can do in SSH to add static ARP entry?
Failover ddns: Don't know the answer, sorry.
-can you give me ssh command to add arp ip static table.
- fail over ddns when 4g key connected can be solved by refresh ddns server all time with xdsl public adress when it is active, 4g key plugged or not. new version of firmware can recover these problems
Hi sir
The Wps section the bottom always stay Grey I can't turn in On
It's says the Wps switch is grayed out when wireless Lan is disable
I don't k know how to turn it ON
Sounds like the entire WiFi function is turned off? Are 2.4 and 5ghz lights on the front of router on?
@@freename yes it is
@@freename if you go on the video at 8:16 this Wps fonction always stay Grey I can't turn in On
Even you try to turn it on but it dosent work
Best guess. ISP have disabled it in config. Maybe.
Hi , having issues with the speed of my Wi-Fi. Plz can you help with any info to make it faster ?
What speed do you get on WiFi and what speed do you get when on a network cable with the computers WiFi turned off?
@@freename was on 100mbps , then I upgraded to 300. But the speed is very poor , even called the customer care still the same . The network is not stable , I even got a mesh to support the speed but still not working .
@@samuelakin7439 What mesh stuff did you get? And you definitely need to confirm the speeds using speedtest.net app when wired into the router. And what device are you testing on, if you are using a super cheap laptop with a weak processor that would be the limitation. If you are using a VPN that would reduce speeds.
@@freename I am using good devices. The problem I have is my wifi , I got the mesh to increase the speed but the mesh is not doing anything . I think it is the router .
@@samuelakin7439 The router should be able to achieve around 600mbps from the Zyxel's WiFi if configured correctly.
HOW CAN I CHANGE THE MTU PLEASE RESPOND SOMEONE
4:29 - on the "Edit WAN Interface" screen it is on the right, second option down with big letters titled MTU. If you are PPPoE it is slightly further down the page. (If you are PPPoA it looks like you can't change the setting.)
@@freename ty
@@freename I dont have the option for some reason
How do i setup UPnP?
It is on by default.
See the LAN setup under Home Networking. UPNP is one of the tabs at the top.
Please do you have a firmware file?
I cant find.
These routers were only ever provided to ISPs to give to customers. Zyxel require you to get the firmware via the original ISP.
how do I change the dns settings on this router
3:47 to edit your connection and 4:18 you can see "DNS Server" section.
Hi, I need to figure out how to change Nat type for my Xbox one?
If I had an xbox to test with I'd try and help - but I have no such thing.
@@freename how can I bridge my router?
@@fusedthewicked7279 4:29 - change the mode from Routing to Bridged? But BACKUP YOUR SETTINGS first.. in case things go wrong. Also note that I'm not going to be able to help troubleshoot problems much over youtube (nor do I have the time to) but I hope it goes well for you.
Do you know how I can change my nat type from 3(strict) 2(moderate) for my ps4.
What ISP?
@@freename the isp is from origin and the broadband is zyxel vmg8825t50
@@essaali4632 It seems like Origin might use "CGNAT" where you are behind yet another NAT router / gateway in their network. Incoming port forwarding won't work (and the NAT type will be more likely to be restricted).
See
forums.thinkbroadband.com/general/4672580-origin-fibre-broadband.html
And
www.originbroadband.com/help-and-support/article/static-ip-addresses
Paying the additional per month to have your own IP address might solve the issue. Or; change to a provider who doesn't use CGNAT.
@@freename thank you
I want to know how to use QoS on this router
12:31 ?
Thanks, in my settings , I can’t see QoS anywhere…
Who is your ISP? They might have disabled some of the screens.
How do we make this as an repeater or extender ?
An wireless WiFi extender
WiFi repeater, not possible. As a wired access point connected to your main router using a network cable.. that could be done, let me know if you want to know how to do that.
How can I set cloudflare DNS (1.1.1.1)?
Which screen should I go to? Thanks
3:45 "DNS Server" section when editing your WAN connection.
@@freename What about Network Setting>Home Networking>LAN Setup>DNS Values 10:26?
Many people change dns there... (I had read in some forums)
@@MarioArci You can do that but it would stop you looking up your own local device names by their DNS name. E.g. "ping HPLaserjet110" would fail where changing it in the WAN settings and leaving the home network settings default should allow you to lookup local names.
@@freename I don't understand, what practical implications would it have? (Thanks for your patience :) )
@@MarioArci Changing it in the WAN options is the normal and better route. Changing it in the LAN setup (DHCP settings) is the bodge method and likely to lead to more strangeness in the future. It would work for most use but not the better of the two methods.
How can I add a vpn to the router
That is not a feature the router has.
I no longer have a 5G connection ... you can help me with this one
Nope :( probably down to SIM plan or mobile coverage / mast issues.
You should call your mobil compagny and reset the sims card
Who is did out of a default wifi usage by dubbling the 2.4 g to 5.0g resulting speed up than the default range resulted to a high cost to user since months ago and therefore,need to be refunded.
I don't know what you mean or are asking. 5GHz is standard on almost all routers and on by default with the same details as the 2.4GHz.
How can i update firmware ?
Through the web interface unless your ISP has disabled access to that page. Note that there isn't any newer publicly available firmware than something.13.
What is the user name and password for log in?
It's on the label or card on the router and is unique to each router.
how to give virus to wifi thief....my neighbour are stealing my wifi and its making my online games lag ugh i dont want to just block them i want them to suffer for stealing my wifi without permission
Unless you gave them the WiFi password, don't have a password or use WEP (insecure and you should change it) and not a WPA password.. they can't be stealing your WiFi.
i want to change mine IP adres how i do that?
What ISP and why do you want to change IP?
@@freename mine IP is leaked people knows mine IP so i wanna change it
@@HassyUI How do you mean "leaked".. There isn't much people can do if they know your IP. They could pay someone to DDoS you - but that is very unlikely to happen unless you really, really annoy someone on the internet. Otherwise what do you think is bad about them knowing your IP? And what ISP ?
@@freename i just ask you can i change mine IP?
@@HassyUI Depends on the ISP and how they run their network. If they assign IPs using Switch/Port ID; probably not. If they use PPPoE; probably not. If they use DHCP based on MAC address and don't do MAC binding then you probably can change IP.
How to get internet. I don't get internet with this modum.
What is your ISP?
@@freename I don't know, where can I find that. I'm new to this.
My dad has a router and modem but my xbox live connection gets blocked by it so I bought a Zyxel 50T modem and a TP-link C60 router for myself.
My dad his router and modem is 3 rooms away so I'm not planning to put a long ethernet cable in the hallway to that.
Both won't give me access to internet. Only my dad's router and modem gives me internet but not my modem and router.
There were no install instruction included with the Zyxel modem. Only 2 green phone cables but I don't have a regular phone, I only use a cellphone smartphone, A grey DSL cable and a yellow LAN cable. A phone thing and another block thing to put in a cable. I didn't have an USB cable but the Zyxel has a USB 2.0 and a USB 3.0 port at the back.
I did have a Wifi signal on network connections when the modem was connected to my pc but still didn't get internet access.
And the TP-link C60 router only wants to install if Its connected to a modem and that only included instructions for the router and a white ethernet cable.
I need to connect a modem first before I can connect that TP router.
I also own 2 very long ethernet cables.
A friend of mine will look up for instructions tomorrow so I will try tomorrow again.
I'm now back on the internet on my dads router and modem. But I need to make my modem and router work so I could try my xbox live on it if it would work but both the zyxel modem and TP router refuse to give me internet.
That's a lot of text and it's late at night here so I've not really digested it all.
But first things you need to know.
You can't have two routers plugged j to one cable service or DSL service.
You will need to link into your dad's router somehow or replace it with your router and then find a way to get the WiFi or LAN to where you want it.
That could be wifi, WiFi repeaters, a network cable or power line networking devices.
(Ignore the VoIP and USB ports on the back of the zyxel, they are for advanced features that I doubt you need yet and will just confuse the initial task of getting online).
I'll try and reply with advice but also remember that I can't see what you are doing or may not understand your setup, the help I can provide is limited and also do not blame me if you misconfigure something and end up with no internet!
@@freename Do I need to link up the TP router to my dads modem? The TP router is capable of wireless connection.
You could do possibly using the WDS Bridge mode of the tp-link but if your original router is, supposedly, blocking your games then it won't unblock that. What makes you think your existing router is causing the block or problem?
How can I block some websites such as instagram from this device?
Add a new DNS entry in this screen: 15:45 - something like www.instagram.com as the hostname and IPv4 of 127.0.0.1 or some other IP that isn't instagram. There might be more hosts you need to add so google for block instagram using DNS and see if anyone has instructions.
Trivial for someone to get around if they know that you've broken their DNS, they can just set OpenDNS or GoogleDNS on their device to bypass your DNS block.
@@freename Thank you very much but I asked from my internet provider to activate family filter. Thus anyone connect the modem can not be able to enter social media or any other harmful website.
What should I do to enable my UPNP to be able to play on my console? (Xbox one)
@@yrr3T Usually on by default. See the video at 11:00 where you see the UPNP screen.
@@yrr3T Enabling UPnP is like opening a backdoor to your security firewall.
Any way to change ip?
What do you mean by change IP? You can see the home network / LAN 192.168. settings in the video.
icannotgetafreename people are ddos me
icannotgetafreename its so annoying
What ISP are you on? (And what are you doing to make people want to attack you?)
icannotgetafreename ?
dam am stupid all i wanted to is to make my NAT open still dont know how
What isp?
Somone who knows how to portforward on this router?
See 13:28