Joe! Will any portal axles from redcat work with the Everest 10? My buddy just gave me his Everest and I was looking to slam the suspension and put it on portals to keep some of that ground clearance
Been thinking of getting this for one of my Groms. A bit disappointed to see now that it is showing in stock they are not including the servo mount/deck with it. Do you know of the best way to reach Furitek? I contacted them because I was going to order the setup for the Losi Mini LMT since it appeared to be the same kit, but they never responded to me verifying if there is a difference in the part numbers - which, now that this one for the Losi is released, it looks like there are three different part numbers for the same kit. It is also concerning that these are made for the specific vehicles and yet they did not orientate the wires on the motor for how it would sit in the chassis. Are you contacts with Furitek solid enough to get insight on that?
HRAGRM18A06 is the adjustable motor mount for the groms. 16-30t room to play. Blue aluminum is the only downfall but rattle can fixes that. 8.88 at Amain right now!!
Nice... Timing etc arent for drifting like someone said. But on a oval and with the grip you have got makes no sence i think. I got since few years a race esc and use these settings. In a way its like real turbo car. If it builds boost from standstill you spin the tires. If it builds boost halfway rpm it will be slower from start and faster at end. When set right they are 100% beneficial on a track. You can determine when the big power comes in, lets say out off a corner/mid straight/or close to end straight. The extra power only comes in when kept full throttle. So you can make/adjust powerband to a circuit.
It's insane in the Mojave. I finally got mine installed yesterday. It'll pull rolling power wheelies like it's nothing. 50 plus mph. Furitek should own the Grom market with this. Anyone with a Grom and $99 won't be disappointed.
It’s neat but kinda pointless. Not everything has to have a “speed run” setup. Or be stupidly overpowered. It’s too much IMHO. It should be brushless for smoothness and I’d like to separate ESC and receiver (maybe even AVC) but these overpowered setups are just for content. Would be interesting to see how you could tune it or use an AVC receiver to get out more realism.
Definitly way cooler now🏁❤
Man that thing is a little beast! Those power slides are mental 🔥
The boost and turbo adjustments are enough to get me interested.
That servo is badass!!!!! 🔥 my mouth did this 😮 when i saw you test it out
Also they need to make mini engine sound speaker. A racecar sound on like 10 of these at once would be sweet
That thing is a beast I love how u can adjust everything.
Looks like so much fun ✌️✌️
Got that baby moving 🔥😎👍
Thank you amazing video
❤ hell yeah
Yo I noticed you set your lipo cut off at 3v is that really safe? I have one rig that’s set on low and it’s like 3.2v I feel like that’s a little low?
Joe! Will any portal axles from redcat work with the Everest 10? My buddy just gave me his Everest and I was looking to slam the suspension and put it on portals to keep some of that ground clearance
Been thinking of getting this for one of my Groms. A bit disappointed to see now that it is showing in stock they are not including the servo mount/deck with it. Do you know of the best way to reach Furitek? I contacted them because I was going to order the setup for the Losi Mini LMT since it appeared to be the same kit, but they never responded to me verifying if there is a difference in the part numbers - which, now that this one for the Losi is released, it looks like there are three different part numbers for the same kit. It is also concerning that these are made for the specific vehicles and yet they did not orientate the wires on the motor for how it would sit in the chassis. Are you contacts with Furitek solid enough to get insight on that?
I do have contacts. Email me at exocagedrc@yahoo.com and I’ll forward your issue to them.
👍👍😃
Hola amigo,pienso que en esa pista desliza mucho,es resbaladiza,con mas agarre tiene que ir muy rapido ,un saludo desde España
👋
✌️@@needlejuse1113
The turbo and boost settings are more for drifting
Ahh ok. I’ve never messed with any of that.
Nice man I have been playing around with my new max 6 g2 the app is so cool
What’s the wheelbase on one of these haven been able to find it listed anywhere online
👍😁😎✌️
Should work for all the Groms too?
💯🙌♥️😄
HRAGRM18A06 is the adjustable motor mount for the groms. 16-30t room to play. Blue aluminum is the only downfall but rattle can fixes that. 8.88 at Amain right now!!
Hahaha this is great!
Needs more traction but great upgrade!!
What size motor is that?? It seems like it has a lot of extra power for its size
360 size. Maybe 380.
I wonder how that set up would do in a two-wheel drive 10th scale buggy
Hmmm. Not sure if the esc could sustain that for very long.
Have you found any aftermarket tire options?
🤷♂️😁
Perhaps metric vs standard threads
It’s possible but idk why they would put standard threads on a servo.
What battery are you using here ?
On your track you should leave the stock motor in 😮
We have a stock class to keep things cheap the mid class can be a bit wild.
Nice... Timing etc arent for drifting like someone said. But on a oval and with the grip you have got makes no sence i think. I got since few years a race esc and use these settings.
In a way its like real turbo car. If it builds boost from standstill you spin the tires. If it builds boost halfway rpm it will be slower from start and faster at end.
When set right they are 100% beneficial on a track. You can determine when the big power comes in, lets say out off a corner/mid straight/or close to end straight. The extra power only comes in when kept full throttle. So you can make/adjust powerband to a circuit.
U get 2hands on that remote u will be getting 4second laps. Pretty impressive. Maybe better tires
Im pretty sure, that the servo isnt toro, but torQ :D
Hmmm yes.
I changed it.
@@ExocagedRC No problem :D Its just, tie Q is really lookin like O :D but its Q
Hey what happened to the foody advice!? 🤣
I ran out of cheap stuff to talk about. LoL
@@ExocagedRC 🤣🤣🤣🤣
🍕🍔🍟🍗🍖🍝🍛🍩🍞🍤🍱🍣🍜😂❤
need to fix roll out for less torque at low speed (bigger pinion )
Or adjust throttle curve
Pinions are limited to 17-19 right now. I’m sure that will change.
Put that in the Mojave Grom instead
It's insane in the Mojave. I finally got mine installed yesterday. It'll pull rolling power wheelies like it's nothing. 50 plus mph. Furitek should own the Grom market with this. Anyone with a Grom and $99 won't be disappointed.
@@boduke9428 don't forget about the receiver
Too much power, not enough (touring) car, & driver mod disengaged🤷♂️
LoL yes the drivermod switch was faulty.
Those poor diffs are gonna be toast 😅😅😅
It’s neat but kinda pointless. Not everything has to have a “speed run” setup. Or be stupidly overpowered. It’s too much IMHO. It should be brushless for smoothness and I’d like to separate ESC and receiver (maybe even AVC) but these overpowered setups are just for content. Would be interesting to see how you could tune it or use an AVC receiver to get out more realism.
Tires aren’t gonna last long 😂
LoL nope
Pass . A woke rc car 😐😂🤣
LoL what?