Großartiges Video - ich liebe es zu sehen, wie ordentlich ihr arbeitet :-) Die Plugs rauszutreiben ist eine super Sache. Als ich mal bei einem Euro-Zylinder (Marke weiß ich nicht mehr) da gleiche versucht hab', hab' ich echt lange hingeklopft, bis ich dann drauf gekommen bin, dass die Plugs konisch waren ;-)
Potti314 ja das hatten wir auch schon 😊 aber eine Lösung ist nie weit entfernt. 😉Super das dir unsere Arbeit gefällt Micha😊 Wir werden mehr DIY Sachen zeigen wenn es gut ankommt. lg
Steel Pinnings We are glad you like our work! The undercut tools are relatively simple but effective! I built it with a thin diamond cutting disc on the dremel tool. Greetings from Germany
wow, great work on the undercuts!! I really thought the only way to do that would be with a mill, but im happy seeing this because all i have at my disposal is a drill press
Sorry about delay in answering mates, youtube did not notify me of your comment :-(( I think I get an idea of how you do it, I'll try to make myself one. Do not have problems of overheating? Being able to watch a video of the process would be great. Thank you very much for the information ;-)))
Thank you for watching! In that case it was pretty easy to find. You should search for one on a Burgwächter. They hide their retaining pins really well. 😀
Danke für den 2. Teil :D. Euer Abus 85 ist echt toll geworden :). Ich hab die plugs beim 80Ti mit einem kleinen Sechskantschraubendreher durchgeklopft, das ging ganz gut und den retaining pin mit ner Schraube gezogen wie Potti :). Euro undercutting Bohrer sehen ja cool aus ;). Euer Video war echt super informativ, spitzenmäßig :D und ich bin jetzt zuversichtlich, dass ich auch mit meinem Versuch weiterkomme haha. Danke und LG :).
redcatimaging Toll freue mich schon darauf dein fertiges schloss irgendwann zu sehen. Die undercut Bohrer/Fräser machen wir immer selbst oder ändern dremel Fräser ab.😊
Keymaster super das es gefällt! Potti 314 bohrt die plugs mit einer Hand Bohrmaschine und einem 2mm bohrer auf und dreht dann eine Schraube rein um sie anschließend zu ziehen. Also alles machbar 👍😊
Keymaster eben es ist meistens nicht so schwierig wie man denkt ..und selbst wenn etwas schiefgeht hat man doch eine Menge gelernt und das nächste mal sieht dann schon ganz anders aus.
Hi Stefan. Danke erst mal. Fast alle Pinbretter in unseren Videos sind selbst gemacht. Das hier ist aus einem Schneidbrett. Wir haben die alten Kernstifte gegen neue, zum Schlüssel passende Stifte getauscht. Das war ja auch der Sinn der ganzen Aktion. 😀 Gruß Tobias
One thing I'd like to see is for someone to make a proper rekeyable lock from a standard brass padlock. I think it would be possible. You would need to provide a means of holding up the driver pins while removing the core, similarly to that of an Almont lock.
Yes. It should be possible. I don't know if we've got the means to realize that. We're definitely no machinists, and sometimes that's really limiting us.
Ive been meaning to ask. I want to try this undercutting method. Which bit ended up with the best result? Think it might be a good day for a project like this.
gibts eigentlich hier in deutschland auch schlösser die sich "ernsthaft" repinnen lassen? immerhin kann man das schloss aus dem video logischerweise nicht verwenden um etwas abzuschließen.
My1 ja natürlich jede Menge zb. die Abus 72/40 sind sehr populär giebt aber auch andere größere die wesentlichen teurer sind. Und jeder Profilzylinder natürlich. 😊
wenn ihr mit Profilzylinder die "eurolocks" wie sie bill immer nennt, die man an der tür hat, das ist klar, hier ging es eher um Vorhängeschlösser. bei türschlüssern kann man auch nach spaß und laune rumbohren, da der möchtegern einbrecher keinen zugriff auf das ganze schloss hat. bei vorhängeschlössern ist das aber natürlich nicht ganz so simpel, da man da einfach die schrauben rauszieht und fertig das ganze. aber danke für den tipp mit den abus, dann kann ich mir mal n schloss persönlich von innen ansehen.
My1 man kann die madenschrauben natürlich auch wieder versiegeln mit epoxidharz oder mit flüssig metall zb. das ist härter als der messing schloss Körper bzw. nach der Methode wie wir sie machen kann man die original plugs auch wieder einschlagen und über schleifen. wir machen halt ein Training oder challenge lock daraus deswegen die schrauben
Großartiges Video - ich liebe es zu sehen, wie ordentlich ihr arbeitet :-) Die Plugs rauszutreiben ist eine super Sache. Als ich mal bei einem Euro-Zylinder (Marke weiß ich nicht mehr) da gleiche versucht hab', hab' ich echt lange hingeklopft, bis ich dann drauf gekommen bin, dass die Plugs konisch waren ;-)
Potti314 ja das hatten wir auch schon 😊 aber eine Lösung ist nie weit entfernt. 😉Super das dir unsere Arbeit gefällt Micha😊 Wir werden mehr DIY Sachen zeigen wenn es gut ankommt. lg
Tolles Video. Sehr angenehm. Ich mag deine Problemlösungskompetenz.
Danke schön! Freut uns, dass es dir gefallen hat.
Bitte. :)
Amazing video guys,
I love the homemade counter-milling tools you made. I will definitely be making myself some of them too.
Thanks for sharing! !
Steel Pinnings We are glad you like our work! The undercut tools are relatively simple but effective! I built it with a thin diamond cutting disc on the dremel tool. Greetings from Germany
Ihr seid also die Typen, die unseren armen Bill zur Verzweiflung bringen xD
Saubere Arbeit!
noobhunter3000 Ja kann man so sagen! Geplant war es allerdings nicht 😉 lg
wow, great work on the undercuts!! I really thought the only way to do that would be with a mill, but im happy seeing this because all i have at my disposal is a drill press
Thanks a lot. We're glad we could help.
well done mate very very cool great job👍😊👍😊😎
Leon's lockpad Thanks for watching buddy! we are still waiting for part 2 of your padlock 😊
Great vid again! A pleasure to view ;-)))
how do you make the bits you use to milling the plug?
Thanks for sharing ;-)))
Tallan Pick We take drills or only the drill shaft with 2.5 - 3.0mm thickness. These we process with a thin dremel diamond disk
Tallan Pick I'm not sure if that was understandable!?🙈😉
Sorry about delay in answering mates, youtube did not notify me of your comment :-((
I think I get an idea of how you do it, I'll try to make myself one. Do not have problems of overheating? Being able to watch a video of the process would be great.
Thank you very much for the information ;-)))
Super, weiter so und mehr davon!!
Marcel Weigelt schön das es gefällt! Danke nochmal für den tollen Assa Zylinder!👍👍👍 lg
Thank you for the video and the subtitles. I would have made a mess of that lock looking for the core retaining pin.
Thank you for watching! In that case it was pretty easy to find. You should search for one on a Burgwächter. They hide their retaining pins really well. 😀
Отличная работа!SUPER!
Vetal R Danke!😊
Danke für den 2. Teil :D. Euer Abus 85 ist echt toll geworden :). Ich hab die plugs beim 80Ti mit einem kleinen Sechskantschraubendreher durchgeklopft, das ging ganz gut und den retaining pin mit ner Schraube gezogen wie Potti :).
Euro undercutting Bohrer sehen ja cool aus ;).
Euer Video war echt super informativ, spitzenmäßig :D und ich bin jetzt zuversichtlich, dass ich auch mit meinem Versuch weiterkomme haha. Danke und LG :).
redcatimaging Toll freue mich schon darauf dein fertiges schloss irgendwann zu sehen. Die undercut Bohrer/Fräser machen wir immer selbst oder ändern dremel Fräser ab.😊
Das wird aber noch eine ganze Weile dauern haha ;). Aber ich freu mich selbst auch drauf :). Danke Freunde :).
sehr informative Anleitung. Ich habe aber leider keine Standbohrmaschine, die ist schon essentiell dafür...
Keymaster super das es gefällt! Potti 314 bohrt die plugs mit einer Hand Bohrmaschine und einem 2mm bohrer auf und dreht dann eine Schraube rein um sie anschließend zu ziehen. Also alles machbar 👍😊
T&J's Lockpicking Nord okay, werden hier mal probieren, ich habe noch ein abus 85/60 um das es nicht Schade ist :)
Keymaster eben es ist meistens nicht so schwierig wie man denkt ..und selbst wenn etwas schiefgeht hat man doch eine Menge gelernt und das nächste mal sieht dann schon ganz anders aus.
Starkes Video. Woher habt ihr die Pickboards ? Wie kommt das, daß der fremde Schlüssel passt ?
Hi Stefan. Danke erst mal. Fast alle Pinbretter in unseren Videos sind selbst gemacht. Das hier ist aus einem Schneidbrett.
Wir haben die alten Kernstifte gegen neue, zum Schlüssel passende Stifte getauscht. Das war ja auch der Sinn der ganzen Aktion. 😀
Gruß Tobias
One thing I'd like to see is for someone to make a proper rekeyable lock from a standard brass padlock. I think it would be possible. You would need to provide a means of holding up the driver pins while removing the core, similarly to that of an Almont lock.
Yes. It should be possible. I don't know if we've got the means to realize that. We're definitely no machinists, and sometimes that's really limiting us.
Ive been meaning to ask. I want to try this undercutting method. Which bit ended up with the best result? Think it might be a good day for a project like this.
Rookie Lock hey!😊 the one I use most is a Dremel cutter/bit which I flattened. Works like a small saw! Greetings Julian
Thanks Julian! im going to make a few undercutting bits later today!
Rookie Lock Let me know if you succeeded☺
Könnt ihr vielleicht ein video machen wie ihr ein Pin-in-Pin macht, bzw. generell mal wie ihr pins bearbeitet?
Bearded Bushcraft Klar das geht los!😊 danke fürs schauen 👍
Schick :)
Stromi 90 Danke!😊
gibts eigentlich hier in deutschland auch schlösser die sich "ernsthaft" repinnen lassen? immerhin kann man das schloss aus dem video logischerweise nicht verwenden um etwas abzuschließen.
My1 ja natürlich jede Menge zb. die Abus 72/40 sind sehr populär giebt aber auch andere größere die wesentlichen teurer sind. Und jeder Profilzylinder natürlich. 😊
My1 Abus bezeichnet diese schlösser häufig mit einem RK in der Nummer was für rekeyable steht zb. 90RK50
wenn ihr mit Profilzylinder die "eurolocks" wie sie bill immer nennt, die man an der tür hat, das ist klar, hier ging es eher um Vorhängeschlösser.
bei türschlüssern kann man auch nach spaß und laune rumbohren, da der möchtegern einbrecher keinen zugriff auf das ganze schloss hat. bei vorhängeschlössern ist das aber natürlich nicht ganz so simpel, da man da einfach die schrauben rauszieht und fertig das ganze.
aber danke für den tipp mit den abus, dann kann ich mir mal n schloss persönlich von innen ansehen.
nette info. danke.
My1 man kann die madenschrauben natürlich auch wieder versiegeln mit epoxidharz oder mit flüssig metall zb. das ist härter als der messing schloss Körper bzw. nach der Methode wie wir sie machen kann man die original plugs auch wieder einschlagen und über schleifen. wir machen halt ein Training oder challenge lock daraus deswegen die schrauben