Should I use the hydro ban sealing tape around the edges and the prefabricated corners? I'm not seeing those in the video and wondering why it's not used. Also, the pre-sloped pan is 34"x66", I need to cut my pans width down so that I maintain 15" to the center of the toilet drain, what does that do with the precut rabbit joins? Would I have to recut that rabbit joint after I've dry fit my pan so that I can install the hydro ban boards?
There is no sealing tape required when using our HYDRO BAN Liquid Waterproofing Membrane. If you choose to use the HYDRO BAN Sheet Membrane for treating the corners this would still be acceptable, but keep in mind for cement backerboard the entire surface would still need waterproofing. If you do modify the pan the rabbit joints would be recommended to be recut.
I would like to know why use 1/2 durock instead of you 1/2 hydroban shower board, I feel durock is a thing of the past. I like your hydroban system. im using it a lot now but I've preferred shluter line drains because of the application I also don't like foam pans they are cheap and will not pass a drop test
This video was actually created 8 years ago before we launched HYDRO BAN Board, so that is why it is showing Durock. So you are right HYDRO BAN wallboard is definitely the way to go!
The left part of the shower floor has a thicker foam than the right side due to the pitch. How would this work if you wanted to make this curbless? Do you offer pans that have a drain on the long side of the wall?
We do make custom pre-formed pans to fit any need. That can be generated through your local LATICRETE Sales Rep. Here is a link to the Barrier Free Shower Assemblies manual. You may find a design in here that would suit your needs… cdn.laticrete.com/~/media/product-documents/installation-information/ds0125-barrier-free-installation-manual.ashx?vs=1&d=20161109T211802Z Here's another link that might be helpful: ua-cam.com/video/LqLyL6IZe_U/v-deo.html
Hi Trevor - thanks for the question. Can you email us at socialmedia@laticrete.com - we have a PDF drawing that we'd like to email you that might help you regarding the drain installation. Thank you!
+SmokeyALCO Typically, the notch method under the flange is sufficient to support the flange as long as the flange is set properly on the mortar bed or substrate. Yes, the corners and board joints will require thin-set and alkali-resistant fiberglass mesh tape as directed by the board manufacturer’s instructions. Once the thin-set is dry then the installation of HYDRO BAN can commence.
Thanks for the question. We highly recommend a medium bed, polymer fortified mortar such as 4-XLT by LATICRETE in order to qualify for our LATICRETE system warranty. If you do not want to take advantage or our system warranty, another brand can be used. Here is the HYDRO BAN Linear Pre-Sloped Shower Pan data sheet for easy reference: laticrete.com/~/media/datasheets/lds0310.ashx
We have a distributor locator on our website that you can search using your zip code. We do however recommend calling them prior to ensure they have the exact product you are looking for in stock. You can find it here: laticrete.com/where-to-buy
Should I use the hydro ban sealing tape around the edges and the prefabricated corners? I'm not seeing those in the video and wondering why it's not used. Also, the pre-sloped pan is 34"x66", I need to cut my pans width down so that I maintain 15" to the center of the toilet drain, what does that do with the precut rabbit joins? Would I have to recut that rabbit joint after I've dry fit my pan so that I can install the hydro ban boards?
There is no sealing tape required when using our HYDRO BAN Liquid Waterproofing Membrane. If you choose to use the HYDRO BAN Sheet Membrane for treating the corners this would still be acceptable, but keep in mind for cement backerboard the entire surface would still need waterproofing. If you do modify the pan the rabbit joints would be recommended to be recut.
Does the drain have too be flush with the wall or can I have a inch of tile behind the drain
Hello! Thank you for your message. You can, but the pan would need to be modified in order to do this.
I would like to know why use 1/2 durock instead of you 1/2 hydroban shower board, I feel durock is a thing of the past. I like your hydroban system. im using it a lot now but I've preferred shluter line drains because of the application I also don't like foam pans they are cheap and will not pass a drop test
This video was actually created 8 years ago before we launched HYDRO BAN Board, so that is why it is showing Durock. So you are right HYDRO BAN wallboard is definitely the way to go!
The left part of the shower floor has a thicker foam than the right side due to the pitch. How would this work if you wanted to make this curbless? Do you offer pans that have a drain on the long side of the wall?
We do make custom pre-formed pans to fit any need. That can be generated through your local LATICRETE Sales Rep. Here is a link to the Barrier Free Shower Assemblies manual. You may find a design in here that would suit your needs…
cdn.laticrete.com/~/media/product-documents/installation-information/ds0125-barrier-free-installation-manual.ashx?vs=1&d=20161109T211802Z
Here's another link that might be helpful: ua-cam.com/video/LqLyL6IZe_U/v-deo.html
Does hydroban work on aquapanel in the uk tried Mapei Aquadefence seems to peel off easy thanks
It should, however we would consult with the board manufacturer and have them confirm roll on waterproofing are approved over it.
I understand everything except the tile on drain at the end. How does that work?
Hi Trevor - thanks for the question. Can you email us at socialmedia@laticrete.com - we have a PDF drawing that we'd like to email you that might help you regarding the drain installation. Thank you!
@@laticrete could you also send me this pdf thanks so much
@@laticrete hi I would also like to get this info in my email about tile covering the drain ashwellhield@gmail.com
Me also I was trying to make sense of it also at the end
@@laticrete hey I can sell this product hands down
And how do you snake the drain when it clogs if it’s tiled over 🤦♂️
Vince Black
The tray would be removable on a tile in linear drain.
Must i use a Laticrete drain or can i use a different?
If the threads match up you could.
Do I flat trowel the drains underside with 4xlt or comb it? Also, should the inside corners be taped with thin set before the Hydro Ban?
+SmokeyALCO Typically, the notch method under the flange is sufficient to support the flange as long as the flange is set properly on the mortar bed or substrate. Yes, the corners and board joints will require thin-set and alkali-resistant fiberglass mesh tape as directed by the board manufacturer’s instructions. Once the thin-set is dry then the installation of HYDRO BAN can commence.
Do I have to use your company's mortar?
Thanks for the question. We highly recommend a medium bed, polymer fortified mortar such as 4-XLT by LATICRETE in order to qualify for our LATICRETE system warranty. If you do not want to take advantage or our system warranty, another brand can be used. Here is the HYDRO BAN Linear Pre-Sloped Shower Pan data sheet for easy reference: laticrete.com/~/media/datasheets/lds0310.ashx
+LATICRETE International, Inc. Understood, I was googling a distributor here in Tucson, but couldnt find one thats why I asked about another mortar.
We have a distributor locator on our website that you can search using your zip code. We do however recommend calling them prior to ensure they have the exact product you are looking for in stock. You can find it here: laticrete.com/where-to-buy
Can I use 255 Multimax mortar to set the tile?
+tileformiles Yes, LATICRETE 255 MULTIMAX™ would be ideal for the installation of tile or stone over HYDRO BAN® Linear Pre-Sloped Shower Pan.
Bad tile layout.