NMD Nexus Medodent Dental Air Motor with irrigation substitute for clinical Micromotor 2021
Вставка
- Опубліковано 7 жов 2021
- Air-Motor is a dental equipment which can be used in Dental clinics & minor surgical units in place of micromotors. They are air driven motors .
Why should Dentist Use Air-Motor rather than Micromotor?
- Advanced Technology
- Economical
- Provides sufficient chair side time for clinical cases.
Features
1) Design
Extra-light & Powerful
2) Motion
360° rotation of the contra-angle handpiece on the motor
3) Compatible
For straight , contra-angle hand piece
4) Rust Free
Corrosion Resistant
5) Disinfection
Autoclavable
PRECAUTIONS:
Avoid contamination of handpiece with Blood or other fluids
Periodic oiling of the handpiece with good quality Oils will yield better results.
Key Specifications
WORKING PARAMETER: speed should be consuming amt of air
When Pressure of air supply is 245KPa (2.5kgf/cmsquare) 18000/min (rpm) 42NL/min
When Pressure of air supply is 294KPa (3.0kgf/cmsquare) 20000/min (rpm) 51NL/min
When Pressure of air supply is 392KPa (4.0kgf/cmsquare) 22000/min (rpm) 72NL/min
Buy best dental products online www.mydentalstock.com
Order by what’s app 9769193360
Does air also comes out like air rotor?
Nice
Nice Video. What is the price for internal as well as external H/P + MOTOR?
How to use sterile normal saline for surgical procedures which require bone cutting?
Option 1 - Fill saline directly in chair bottle and use internal / external irrigation air motor
Option 2 - hang Saline on higher point and use external straight hand piece to irrigate with saline .
Need irrigation tube
Portable dental unit how much price???
Hello sir, it can cause air emphysema ?as it is air driven
High risk. Shud not use this. Can be used only for contra angle Handpiece for polishing the teeth
1)Does this fit in regulsr handpiece points sir??
2))Can we use for all regular contraangle and straight handpieve work like crown teeth polishing, trimming dentures and all?
3) If water slot there, is there anything that we should do to stop water ehile trimming dentures or using polishing discs for composite restoration
4) Does it automatically reduce rpm to 35k just like other micromotor or should we manually reduce it
Kindly answer my queries... Thanks in advance sir🙏