Вставка
- Опубліковано 24 гру 2022
- New #tpa3116d2 2.1 Board, Economy and Hi Fi, Demo & Sound Test.
Buy it from here:यहाँ से क्लिक करके ख़रीदे
inkocean.in/collections/ampli...
inkocean.in/collections/ampli...
amzn.to/3PTo32f
amzn.to/3hXMUFo
amzn.to/3WHjMB3
Feature:
This is a support Bluetooth 5.0 audio receiver Updated, with a pre-amplifier, Bass crossover Processing. With bass, left and right channel volume adjustment, treble adjustment, the total volume potentiometer control 2.1 amplifier board.
Use DC power supply: 12-24V Power Supply, Maximum support 50W (left channel) +50 W (right channel) +100 W (bass channel) three-channel output.
Is the use of the United States TI company TPA3116D2 high-performance digital amplifier chip as the core, a parallel bridge subwoofer output, do a left and right channel output.
Wide operating voltage, power-saving design, efficiency up to 90%. You can use good performance switching power supply, laptop switching power supply, you can also use the charging bottle, or car power supply and so on.
Board is a good test of the finished product board is welded, according to figure connected to a good speaker, audio input or connect the Bluetooth audio device and connected to the power can be used
Tips:
If you need Power Supply,Please Choose this: 24V 6A Amplifier Power Supply, and if you need subwoofer speaker ,Please choose: 4OHM Subwoofer
Parameter
Size: 101 * 100 * 25mm / 3.98 * 3.94 * 0.98 inch
Operating voltage range: DC 11-25V (current 3-4A, or 19-24V/4-5A ,If the power requirements high, above20-24V/8-9A )
Bluetooth receiving distance: 8m(26ft)
Speaker impedance: Left/Right Channel: 4-8Ω , BASS Channel: 4-8Ω - Наука та технологія
Sir, esko wagnor car me nippon 9 pro ke sath chalu sakte hai kya aaur car ke battery pe direct chalta hai kya
Helow sir kya hum Amazon par milne wali (home acoustic tiles) speaker cabinet ke andar damping ke liye use kar sakte hen kya
Kya iske 2 channels m full range speaker lga skte h ya only mid range ata h ?
Hey sir
Mere pass sony ka srd 9 home theatre tha uska amp kharab ho gya hai mujhe use upgrade karna uske speaker ok hai to us ke liye amplifier bata do sabwoofer 3.6 ohm ka 30w hai or satellite 8 ohm 15w ke hai 2 pice to is ke liye best amplifier kon sa hoga to batado please
Sir IOT 255 ko agar transformer pawer supply banake chalana ho to kitne volt ka transformer use kare
Kya 2n3773 ke 2 amplifier board ek doosre se jode ja sakte hain, yadi haa to kaise ? Reply me please.
Kya lower suppy voltage ke sath higher ampere dene se output power same rahega ya kam hoga?
@what i think
Issse tramnsfoormmr se challaya ???
Am your iot 255 costomer Maine ye buy Kiya he mast work kar raha hai but. Mujhe ye 24v battery se chalana he to us battery ko charge karne ke leye mujhe 25.5v Dena padega usi wakt amplifier bhi connect rahega . Matlab amp ko 25.5 v milega kharab hoga ya nahi. Please reply. Very fast
Thanks a lot for your valuable knowledge sharing in easy language while still being rich in information.
I want to make your 100W class AB amp that you had shared in the past, but I don't know how to purchase those individual components, is there any website where we can send the list (or video) for getting the full components for the amp, PCB we can order from jlpcb as you suggested.
Also, I want to make a 4th or 6th order bandpass subwoofer for 20hz tuning . in one old video you gave example of Fredo company sharing the Ts parameters so planning with their 12" DVC sub . should I go for iso-baric configuration inside the bandpass box ?
your recommended inkocean and indian extreme audio seem to be great for the other parts
Halo sir mere paas bhut series ke board hai lekin havy bass ke kon sa board kharidu 2.1me bataya ga sir 🙏🙏🙏🙏🙏
Bhai Mera pass ek Kenwood KM 893 power Amp hai, per channel 120 watt 8 ohm me, mai khud (12 inch woofer, 5 inch mid, 4 inch tweeter) 3 way box banana chahta hoon, speaker , mid , tweeter kitne watt ke lena chahiye ??
Sir which class d board give heavy bass for 8 ohm 100 watt sub woofer?
4 ohm satalite speaker or 4 ohm subwoofer use krr sakte ha..?
Sir 10 micro henry ki coil heat issue hota hai kya
I purchased it.but problem come with higher volume.when bass come ,mid and high become down.i use 12volt transform supply
Iss board me 4 ohm 60w ka woofer ke sath 10w ka 2 speaker use karne ke liye kitna volt ka smps chahiye??
Super sounds quality
Speaker ke liye enclosure market me milta hai kya?
Bhai car tweeter Ghar me use kar sakte hai kya
Bahot hee la Lajavab sound hai Guruji…
Philips ke 3Way Speeker chala sakte hai na…Powar supply ki price kitni hai
Bhai ismein 5.25 inch ka subwoofer chala sakte hain kya ??
Awesome board and review thank you 😊
do you know how to make that 50+50 watt as mono . .
Hello sir, Can i connect, two 4ohm midarange speakers in left channel in series and one 8ohm tweeter in right channel for 24bolt 6amp supply please suggest sir. I want to connect two midrange ad one tweeter in this board how can i connect sir. Please please help
Is there any option for 100+ 100 watt stereo kit???
sir aap @inkocean ki side kyu suges karte ho.
log vaga se purchase karte he material to vo log purani Repaird Board Bhej dete he.
or retun ka bolte he to mana karte he
सर जी मैने इस iot 255 bord me aux cable lgane se kam sound ata है ब्लूटूथ कॉनेक्ट करने पर साउंड फुल आता है
Thanks and keep enlightening us as usual🙏
Sir merpe 20 volt 3 amp ki power supply hai usse nahi chalega ye
Transformer se chala sakte hai kya sir
The power LED blinking or stable during functioning ?, My bord IOT 255 .2.1 blinking on giving power ,request answer from viewers, I powered with laptop adapter 20 v 4.5 amp connected with two satellite speakers of 8 ohm 10 watts each and a subwoofer 15 watt 4 ohm ,the bord gets heated up very quickly even at low volume, is it due to under power or under wattage speakers or issue with the board request reply to solve the issue , sound quality is good , During Bluetooth mode the led blinks
What is Tpa3110 current consumption on 12v at 10 +10w at full volume ??????????
Truck battery 24 volt mein Nahin chale gaye kya?
Mid rang speaker laga sakte hai
6 ohm sound system pe chala sahi hoga sir ??
Looks like a paid review to me 🤔
Sir ese 12v 16ampier se chla sakte hai.
12 volt5 Ampire se kitna watt output milega
sir aap jo soundbox use karte uska details digye waise kaise purchage kar sakta hu .kyoki aapka soundbox/ speaker best hai
Sir Total kitne watt de sakte hai Subwoofer or Satelite milake
Please reply dijiye ga apka reply mere liye bohot jaruri hai 🙏🏻🙏🏻
Please suggest me an amplifier board for keyboard amplifier.
What is the difference between chip types and smd indoctour
Sir song sun ke maza 😍 hi aa gaya 🤩🤩🤩🤩🤩🤩🤩
Bhai switch se mode nahi chenge hota, input me audio ka jack lgane par blutooth band hoker line ka deta hai
Can you post a video on TDA 7292 stereo amplifier
Sir 12 volt 15 amp se koi problem hoga kiya
8 inch speaker of 200 watt in rms can it available in market
sir please ink ocean ko aap recommend kigye ki way log 24 0 24 ,28 0 28 me bhi smps banaye jisss ki iska use lm3886 or tda7294 me kiya ja sake.maine ink ocean se baat kiya tha per unhonne mere baat ka aacha respond nahi diya
Sir 200 watt subwoofer ke liye accha hoga e board?
Sir Ye Bord 24 Volte 10 amp Smps Se Chalta Hoon Kuch Der Bad Hit Horaha Hai
Speaker series and parallel connection information please kay Speaker ka watt series mai Kam ho jata hai 😵💫
Can I run 2 ohm series woofer
Description box ke power supply board wala link is not working.
great video sir but can u make a video on 100w x2 , 300w x1 rms 2.1 amp for audio monitoring use video plzzz
Hi sir this amp best for 3way speaker 100 watt
Transformer se connection kese kar sakte hai sir
Ye satellite speakers kya hòta ha.
सर मुझे घर के लिए एक 300 -300 वॉट का sterio बनाना चाहता हूं active crossover ke साथ
(1) bass ke लिए 200 +200watt. 5200+1943 का board लगाना चाहता हूं
(2) mid के लिए 50-50watt का board लगाना चाहता हूं
(3) trable के लिए भी 50-50 watt का board लगाना चाहता हूं ये सभी board सही से काम करेंगे ..active crossover ke साथ..?
अगर ये सभी सही से का करते है तो मेरे को mid fenquncy & trable के लिए कौन कौन सी audio ic के board लेने चाहिए जिससे clear sounds मिले मेरे को ..?
(सर मैने आपका एक active crossover पर एक video देखा तब से मेरे को active crossover वाला amplifier बनाने का जुनून सा हो गया और मैं बाना कर रहूंगा पर छोटा बनाना है tatal 30+300watt sterio )
मैने dolgy sound के silkdom twiter भी ले लिया है
Mid के लिए भी speakers लिया हूं
बस bass के लिए कौनसा speakers लेना है woofer या subwoofer
🙏please sir help me🙏
Sair AK Acha Haby Bass Treebl Mid Full circuit diagram Dikhaie Class AB 600w Stereo Amflire ke Lie ,,Please
sir aap ek video smps ke uper bhi laaye jisse ki kisi bhi single supply smps ko kaiss dual supply me change kare
sir super thanks wala option youtube par lekar aaye jisse aapko financial bhi support kar sake
Awaz drop ka video banyea sir ji class d ka sabse jyda problem isi chiz ka hai
Sir what is the right way to use cross over with class d amplifier please make a video
Iska fix karna panel kidar milega
Jo red volor ki tpa 3116 chinese board aati hai usse compare kijiye
Nice performance
Sir op amp based ek powerfull tone control with mid design kijiye sir
Sir plezzzz
Aap alag se ish bord me pre amplifier lgake chalaye
But at its nob turns to high volume it stops sound. And it limits the volume.
Sir How to connect dual iot 255 amlifire together
A power supply me board trip to nhi honga.
Sir I had recently bought (tda8932) from flipcart, I was using a 19v 3a laptop power supply and a 6 inch 4 ohm oswal woofer the sound was very loud and the bass was awesome but the ic used to heat very easily and it last only for 2 days and it stopped working
Use heat sink
20-24 voult 8-9 ampere ka power supply nahi mil raha hai
Power supply ka link nahi hai
Sir diy circuit ki video banao
Sir 1 soundbar se dusra soundbar kaise chalega
As long as TI Class D ICs are use these are good enough otherwise it's all marketing
Sir how to make 3 way speaker in this board
On karte hi esa lagta hai jese speakers blow hogye ho ,baaki sab thik hai
Jai hind sir
💐👌🙏
I am Waiting for Do it yourself,= Video.....🙂🙂🙂🙂🙂🙂🙂
Where to buy this broad
Price at start please.?.
Koi aesa Bord Bataiye Jise 2 10inch Speaker baje Full Bass me Sasta me Link de sakte h
Is board me Bluetooth ka connection bahut weak hai, aur aux input dene par gain bahut kam deta hai.
ऐसे बोर्ड में एफएम support वाला मॉडेल बताये प्लिज
Sir iska Bluetooth range bahut kum h 2 miter only
Sir i hav aiwa ns 300 speakers
Which amp should i use ?
Speakers are 30 to 40 watts
6 ohms
Hai Sir... Could you please upload a video regarding active crossover for 3 way system....??... Learning lot of things from you.... Thank you
Will try....but I have to buy One.
@@WhatIThink Ok Sir, Thanks for the reply... Request for a paper presentation instead of buying a board.
sir super thanks wala option youtube par lekar aaye jisse aapko financial bhi support kar sake
I also want to know about 3 way active crossover for 5.1 home theatre making .
Thank you for spreading knowledge to all us .
I want to make a 5.1 dolby atmos home threatre for my home. Will you plzz give me some guidance about it . For my help to make it in budget.
Sir please
Power supply board ke link de do
24v 5amp 3116d2 4om speaker jal gaya ic jalgae stereo
Sir subwoofer channel me sirf bass aayega ya bass ke sath vocals bhi aayegi? Plss reply😢
Only bass
@@Techx429 Thanks bro
Sir please stk 4231 -2 ka review..
I mean 21 volt DC ke liye kitne volt ka transformer use kare
Sir 21 volt transformer use kare ya 18 volt
Sir kya is board ki sound quality tds7294 se achhi hai
aap apne experience se btaiye
7294 have some extra point compare to tpa3116.
Speaker box bhi bohot matter krta hai
Sir is board ko 24volt battery se
Sir when you make the 2nd part of assembling of a amplifier
Very soon
Hello sir,
I have a 150W 3 Ohms LG subwoofer with 4 satellite of 50w 4 Ohms
Can I use this board with 2 satellite channels or you can suggest a good board.
P
Yes you can