This is exactly the type of hammer I want. Your'e simplicty is outstanding in making this . You are agenius . One day I will try make one . I would however try and put a ballbearing were the hammer handle meets the cam to reduce friction.
Well I'd say it won't win any races for speed but it works exactly as it's been designed. Ok bigger spring heavier head but was it built as a heavy use tool or something to assist and save ya arm from bashing a hammer about maybe flat material shaping . It's a good tool all the same , it's simple and portable and it works. Nice job . Thanks for sharing .
Really cool. If you increase the front spring I think you will get more force. I would be interested to see what it would do with some 1/2 hot roundstock, too.
Not bad. However, in the interest of reducing wear to the bearings in the drill, I would have mounted the driving sprocket in pillow bearings just like the driven sprocket. Hand drills are not designed to cope wth more than incidental lateral forces. Also a replaceable doubler on the pipe, to allow for wear from your cam, would be a good addition. Otherwise in just a few months of regular use you will be replacing the pipe.
@@jonathanresurreccion2995 A bench grinder in normal operation does have lateral forces applied to the spindle, so I would say a heavy duty bench grinder is probably up to the task and should last for quite a while. On the other hand, it must be said that angle grinders are cheap to replace. I just think it is good engineering practice to support rotating parts in heavy duty bearings when lateral loads are to be applied continuously..
Excelente trabalho.Da maneira como você corta materiais pesados e espessos bem que merecia uma serra fita para metais ou um corte plasma .Seria muito mais produtivo .Atenção fornecedores de materiais ,vamos ajudar o rapaz ?
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
This is 100 percent perfect for my needs and space. Do you by chance have a materials parts list for this build?? I want to build this using a variable speed motor, for forging demascus knife billets. 100 percent perfection, and simple design..... Thank you for sharing this!!!!!
@@robd6337Силовой молот? Главное- хороший кузнечный горн, чтобы разогревать металл до светло- жёлтой температуры, а потом бить можно ручным молотом без всяких "дополнительных заморочек". А ковать на мех.молоте и дурак сможет.
If you raised the back of the pipe for the hammer you wouldn't need to have an angle on the hammer head. Would work better for a more even hit. I'd also get a used motor instead of the drill. More power and longer life.
Or you could put that tool to the side and just stick the ends of that pipe into the bench vise that you used to build this tool and use that to press them. Done.
Hammer is striking way too soon and a lot of potential power is being lost. That rod on the pillow blocks and lifer should be lower than it is - so when the hammer hits the 'anvil' it full force is in use. Great project overall though - I love it. It had given me a few ideas! Keep on truckin!
It works well on cold pipe or tube. I think you’ll need a lot more power and weight for anything solid.
Good job.
задумка хорошая
Genius concept can always add larger spring great job!
Thanks man
Interesantă invenție. Ciocanul mai greu e mai bun la fierul forjat .
Ok thanks man
Mantap nih ide kreatif banget
Thanks dear
Wow Ide cerdas membuat alat sederhana tapi sangat bermanfaat... 👍👍👍👍
Thanku
this is amazing the latest knowledge from you. may God bless your life
Thank you very much man
Hola, ¿Me podrías decir que materiales son los que usaste?
This is exactly the type of hammer I want. Your'e simplicty is outstanding in making this . You are agenius . One day I will try make one . I would however try and put a ballbearing were the hammer handle meets the cam to reduce friction.
Ok man thank you. Your comment motivates me a lot.
@@DiamleonDiyBuilds uni u ú
it can be useful for cymbals hammering
Very ingenious and cheaply made.
Thanks man
Well I'd say it won't win any races for speed but it works exactly as it's been designed. Ok bigger spring heavier head but was it built as a heavy use tool or something to assist and save ya arm from bashing a hammer about maybe flat material shaping . It's a good tool all the same , it's simple and portable and it works. Nice job . Thanks for sharing .
Thank you very much dear
Really cool. If you increase the front spring I think you will get more force.
I would be interested to see what it would do with some 1/2 hot roundstock, too.
Thanks man and thanks for your suggestion
@@DiamleonDiyBuilds پ
@@DiamleonDiyBuildsman I need one of these tad bigger for breaking in baseball gloves
Great build. What brand is the green cutting wheel on your angle grinder.
Thank you❤. I use yuri cutting wheel
Thank you for the reply. They look like they hold up really good.
Ok bro
It looks killer!
Thanks dude
Bạn chế máy hút bùn mà không bị cuấn rác được không
You have too much hammer lift, also need to ad another ramp to lift the hammer twice as much.
Also a shorter stronger spring.
Nice job. God bless you.
Thanku
Excellent concept, love the enginuity 👍👍
Thank you very much bro
tolle idee.
very good a home made toffee hammer
Thank you
Very nice very beautiful and useful hammer.
Thanks dear
Super práce 👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks dear
good evening, I would like to know the dimensions of the machine for copying. Thank you
Sorry I'm not having the design plan for it
it was useful for me thank you
Ok thank you man
Sir please send mesurement all items....
Sorry bro I'm not having the design plan
Nice job!
Thanks bro
Those green cutoff wheels seem good. What brand/type are those
I use yuri brand
I love it!
Thanku
Cool idea
Thanks dear
Hi DL beautifully done good job mister well done
Thanks dude
Wonderful Man..Good Job. Keep it up.🙂
Thanks hari
Not bad. However, in the interest of reducing wear to the bearings in the drill, I would have mounted the driving sprocket in pillow bearings just like the driven sprocket. Hand drills are not designed to cope wth more than incidental lateral forces. Also a replaceable doubler on the pipe, to allow for wear from your cam, would be a good addition. Otherwise in just a few months of regular use you will be replacing the pipe.
Would a bench grinder with double chains works as well?
@@jonathanresurreccion2995 A bench grinder in normal operation does have lateral forces applied to the spindle, so I would say a heavy duty bench grinder is probably up to the task and should last for quite a while.
On the other hand, it must be said that angle grinders are cheap to replace. I just think it is good engineering practice to support rotating parts in heavy duty bearings when lateral loads are to be applied continuously..
Good
Thanks man
Buenas días amigo
Top show parabéns 👏👏👏🤝👍🇧🇷🇨🇮
Thanks man
Thanks for sharing subscribed great video
Thank you very much bro
Show de bola.
Thanks man
Excelente trabalho.Da maneira como você corta materiais pesados e espessos bem que merecia uma serra fita para metais ou um corte plasma .Seria muito mais produtivo .Atenção fornecedores de materiais ,vamos ajudar o rapaz ?
Thanks man
listen to the boss,,,,, don't forget to stop by for black coffee together... goes duit and goes natural so that you will increase your enthusiasm for work and add brothers thank you very much
Great 👍
Thanks bro
Genial step by step tutorial 😊 it’s a pleasure to look , great job 👏 😊
Ok thank you very much man
Good job 👍👍👍👏
Thank you very much
Sir Iskandar ret kaya ha
Great idea!!! Greeting from Rosario, Argentina 🇦🇷 !!!
Thank you dude
il n'y auras jamais assez de force pour martelet un morceau d'acier plein
L'axe de maintien du marteau devrait être à la même hauteur que l'enclume pour frapper perpendiculairement .. Sinon bel outil ! 👍
Ok thanks for your suggestion bro
@@DiamleonDiyBuilds You're wellcome ! 😉
Ok
This is 100 percent perfect for my needs and space. Do you by chance have a materials parts list for this build?? I want to build this using a variable speed motor, for forging demascus knife billets. 100 percent perfection, and simple design..... Thank you for sharing this!!!!!
Ok thank you very much dear
Muito bom 👍👍👍👍
Thank you very much
Nice
Thanks man
You need a more heavy duty spring!
Thanks for your suggestion bro
Kitna me bechenge AAP bataye kharidna hai
Good luck my friend and i'm waiting for your new video
Thank you. Today I have uploaded a video
You should have done a stronger spring
Is cool machine
Thanks man
Superb
Thanks tony
@@DiamleonDiyBuilds welcome
nice
Thanks bro
Super
Thanks bro
HII i am student please guide me for this project which tools and materials needs to create this project
So many things wrong w this video, can never be wrong at a man engineering his own stuff though 👍🏽👌🏽
That'd be awesome for forging lead. Lol
Well... that spring is nowhere near tight or powerful enough
Let's see the power hammer you made.
Im not dumb enough to do this. I bought a rotary hammer drill like a normal person 🙏🏻
I think it's just a proof-of-concept thing.
@@robd6337Силовой молот? Главное- хороший кузнечный горн, чтобы разогревать металл до светло- жёлтой температуры, а потом бить можно ручным молотом без всяких "дополнительных заморочек". А ковать на мех.молоте и дурак сможет.
@@robd6337💪
Might be OK for cracking Walnuts, that would be its limit though.
Good ii boss 👍👍😊😊😍😍
Thanks dude
If you raised the back of the pipe for the hammer you wouldn't need to have an angle on the hammer head. Would work better for a more even hit. I'd also get a used motor instead of the drill. More power and longer life.
Ok thank for your suggestion bro
Обычная кувалда существует. Я даже их видел.
Ok for very light duty
do you have detail on how to make the power hammer
Sorry no bro
Se tivesse batido um martelo tinha economizado energia , e tempo
14:15 you could do that with a single hammer blow.
How many drills do you burn through???
Для кузнечной ковки металла
👍👍🙂
Thank you very much
Enserio....? Todo esto para golpear un tubo de 2 milímetros de expesor que lo puedes hacer a mano con tres golpes!!!!
👍!!!
Thanku
Ну тут по крайней мере работает. Не точто у других подражателей
Thanks bro
Mere ko yah machine chahie Sar Kaise Milega
The hammer need more load for harden steel.
Ok thanks for your suggestion bro
nice.. but two strokes with that hammer manually would have gotten the job done on that pipe....
Ok thanku
What is the total weight of hammer
What is that cutting blade?
I use yuri cutting blade
при ковке ножей, если доработать, то будет замечательно
Presser Ang Gawin mo walang power consume
Sir this project is available now
Sorry I'm not selling it
agarra un combo y ya
самоделка... ну вы поняли...
Sir is this available now
Sorry I'm not selling it
145 strikes to do what you could with 3 and your arm....
Maybe it’s for someone who’s missing an arm?
@redneckoperations for all the one armed smiths out there yeh? Still makes more sense to leghold tongs and swing you're good arm...
Or you could put that tool to the side and just stick the ends of that pipe into the bench vise that you used to build this tool and use that to press them. Done.
Yes we will win.
Thanks man
@@DiamleonDiyBuildsp
Drill machine watt?
Мужик, что за диск для Болгарии у тебя? 😂 посмотрел от начала до конча и он у тебя не сточился не на сантиметр
I got idea from hummer machine to dehusking coconut
😍😍😍😍😍😍😍
Thanks dear
1sec in proper press
Зачем?)))
Hammer is striking way too soon and a lot of potential power is being lost. That rod on the pillow blocks and lifer should be lower than it is - so when the hammer hits the 'anvil' it full force is in use. Great project overall though - I love it. It had given me a few ideas! Keep on truckin!
Thanks bro
👏👏👏👏👏🤜🤛
Thank you
Очень слабенький. Трубки тонкостенную мнет с трудом. Обычную водопроводную трубу так же мять наверное минут 40 будет если вообще сможет...
هاي توب