Bluetooth Two Wheel Car Pet.(Control Via Smart Phone)-Version 01

For the Code Example , Please Visit following Link : javainstituteforadvancedtechn... #Java Institute for Advanced Technology #java #Software Engineering #coding Ninja #pcjt #sqa #IICut #BCU

[@javainstituteforadvancedte1415]

javainstituteforadvancedtechnology.blogspot.com/2020/12/bluetooth-two-wheel-car-control-via.html

[@nirodharupasinghe2288]

☝☝☝☝☝code example

[@rathnaironworas4791]

😎එල මචන්

[@TS_CreationAqua]

Woow

[@hasithadilanka7865]

වාවු සර්.... 😍

[@zaid8779]

It's working? Or not

[@MClogc]

@@zaid8779 working bro

[@rathnaironworas4791]

❤❤

[@sltechgadgets9044]

niysmyi sir

[@cristinadascalu1514]

heeelp me it;s not working. what;s wrong? i put the code from video > not working, i put the video from comment still not working. what's wrong?

[@MClogc]

TX - > RX set karanna oni bluetooth module eke. Mata wune oya waradda💯

[@Autovehicles735]

This for use bluetooth hc 05

[@rasi1980]

mekata lights ehm hadanna barida

[@MaheshHeshan-wg8yt]

උදවූ ඕනි🥺

[@zaid8779]

Sir program code is not working please help 🙏

[@heardsth2484]

Yes sir

[@heardsth2484]

Code is not working

[@gamingsudda4285]

// Starting of Program
int Input_Pin_4 = 9;
int Input_Pin_3 = 10;
int Input_Pin_2 = 11;
int Input_Pin_1 = 12;
char Value;
void setup() {
pinMode(Input_Pin_4, OUTPUT); // Digital pin 9
pinMode(Input_Pin_3, OUTPUT); // Digital pin 10
pinMode(Input_Pin_2, OUTPUT); // Digital pin 11
pinMode(Input_Pin_1, OUTPUT); // Digital pin 12
Serial.begin(9600);
}
void loop() {
while (Serial.available() > 0) {
Value = Serial.read();
Serial.println(Value);
}
if ( Value == 'F') {
// Robo Pe_t Run Forward
digitalWrite(Input_Pin_1, HIGH);
digitalWrite(Input_Pin_2, LOW);
digitalWrite(Input_Pin_3, HIGH);
digitalWrite(Input_Pin_4, LOW);
} else if (Value == 'B') {
//Robo Pet Run Backward
digitalWrite(Input_Pin_1, LOW);
digitalWrite(Input_Pin_2, HIGH);
digitalWrite(Input_Pin_3, LOW);
digitalWrite(Input_Pin_4, HIGH);
} else if (Value == 'L') {
//Robo Pet Turn Left
digitalWrite(Input_Pin_1, LOW);
digitalWrite(Input_Pin_2, LOW);
digitalWrite(Input_Pin_3, HIGH);
digitalWrite(Input_Pin_4, LOW);
} else if (Value == 'R') {
//Robo Pet Turn Right
digitalWrite(Input_Pin_1, HIGH);
digitalWrite(Input_Pin_2, LOW);
digitalWrite(Input_Pin_3, LOW);
digitalWrite(Input_Pin_4, LOW);
} else if (Value == 'S') {
//Robo Pet Stop
digitalWrite(Input_Pin_1, LOW);
digitalWrite(Input_Pin_2, LOW);
digitalWrite(Input_Pin_3, LOW);
digitalWrite(Input_Pin_4, LOW);
}
}

[@alinanaeem2611]

@@gamingsudda4285 this code also not working

[@alinanaeem2611]

@@gamingsudda4285 is that code is correct i take it from another video
/ Starting of Program
int m1a = 9;
int m1b = 10;
int m2a = 11;
int m2b = 12;
char val;
void setup()
{
pinMode(m1a, OUTPUT); // Digital pin 10 set as output Pin
pinMode(m1b, OUTPUT); // Digital pin 11 set as output Pin
pinMode(m2a, OUTPUT); // Digital pin 12 set as output Pin
pinMode(m2b, OUTPUT); // Digital pin 13 set as output Pin
Serial.begin(9600);
}
void loop()
{
while (Serial.available() > 0)
{
val = Serial.read();
Serial.println(val);
}
if( val == 'F') // Forward
{
digitalWrite(m1a, HIGH);
digitalWrite(m1b, LOW);
digitalWrite(m2a, HIGH);
digitalWrite(m2b, LOW);
}
else if(val == 'B') // Backward
{
digitalWrite(m1a, LOW);
digitalWrite(m1b, HIGH);
digitalWrite(m2a, LOW);
digitalWrite(m2b, HIGH);
}

else if(val == 'L') //Left
{
digitalWrite(m1a, LOW);
digitalWrite(m1b, LOW);
digitalWrite(m2a, HIGH);
digitalWrite(m2b, LOW);
}
else if(val == 'R') //Right
{
digitalWrite(m1a, HIGH);
digitalWrite(m1b, LOW);
digitalWrite(m2a, LOW);
digitalWrite(m2b, LOW);
}

else if(val == 'S') //Stop
{
digitalWrite(m1a, LOW);
digitalWrite(m1b, LOW);
digitalWrite(m2a, LOW);
digitalWrite(m2b, LOW);
}
else if(val == 'I') //Forward Right
{
digitalWrite(m1a, HIGH);
digitalWrite(m1b, LOW);
digitalWrite(m2a, LOW);
digitalWrite(m2b, LOW);
}
else if(val == 'J') //Backward Right
{
digitalWrite(m1a, LOW);
digitalWrite(m1b, HIGH);
digitalWrite(m2a, LOW);
digitalWrite(m2b, LOW);
}
else if(val == 'G') //Forward Left
{
digitalWrite(m1a, LOW);
digitalWrite(m1b, LOW);
digitalWrite(m2a, HIGH); digitalWrite(m2b, LOW);
}
else if(val == 'H') //Backward Left
{
digitalWrite(m1a, LOW);
digitalWrite(m1b, LOW);
digitalWrite(m2a, LOW);
digitalWrite(m2b, HIGH);
}
}