7:10 my setup made it! Glad you approve of the majority of it. My desk is about 6 years old now, hence the terrible sag! Need to update to a proper butcher block that is longer so everything is centred as well! So many awesome setups in this.
It's impressive to see how creative and varied everyone's customization can be. The garden shed conversion and the clean, wood-toned setup especially caught my eye.
I've seen people even getting offended by giveaways, not because they didn't win (at times) they are offended by other people giving away things overall. @@scottjgray83
the n00bifiers setup is sweet. I have tested it a bunch of times, and it is epic. The monitors seem a bit high as the motion systems is at rest(down) but raises up significantly when turned on. Cool to see him featured on your show 😁
3:09 that's Noobifier! He is also a UA-camr and is former Canadian Military, also he does full motion simpit setups for a living. Contact him if you want to get setup with a rig.
The RTFM setup would fix the audio problem, and I'm surprised that they didn't use it like they did in the past when all three of them reacted to setups.
@@shadowwolf2608 I tried searching for 10 minutes and can't get anything else other than "read the F***ing manual" meaning for RTFM (or a variant replacing the F word) what does RTFM mean in your context?
YAAAAY ANOTHER SETUPS REACTION. It's always fun to hear y'all's feedback about setups and I can't wait to be able to show you what I have planned when I bring it into the world. :3
For a quick disconnect cooling you might try dry break fittings. We use them in drag racing for things like transmission lines so we don’t have to drain fluid out of the lines and cooler when swapping transmissions. They are a bit pricey but would probably work for rapidly swapping a liquid cooler.
Team - saw Jay's Tweet on the fundraising scams and so I did the right thing - bought a couple of shirts from your store! Keep up the great work and Jay - take care of yourself! Nic and Phil have your back and I for one am NOT going anywhere. This channel and team ROCK!
The retro builds didn't enough love! I remember those Alienware cases being all over Tigerdirect, tons of knock offs or similar dups some that era. And that Voodoo tower - what a brand - got absolutely destroyed when it got bought by HP. Love the reaction video guys - keep up the great work!
Yup, that's me. It's an AC Infinity intake fan. That hallway stays pretty cold, so it pulls in air and a huge AC Infinity T5 in the rear pulls out the hot air.
1:56 I used an Antec clone case, called the X-Superalien back in 2003, until 2019 when I built my current rig in a Lian Li 011 clone, which wasn't shown, again.
I love these videos. Wasn't able to submit my setup since I was at work when you tweeted out. I'm hoping next time you do this I'm home to send pictures.
love these! lots of inspiration for what i'm finishing up now came from watching and taking little bits here and there from your reaction videos keep it up!
For the Karlby/Alex drawer desk. I used that idea but subbed the Karlby (didn't like the MDF for reason pointed out in video) with an actual butcher block wood counter top from Home Depot got an unfinished one (but they did have finished ones) and stained it myself and came out to the same price.
5:00 - the backdrop behind the desk with The Lich King, is from "Heroes of the Storm" (Blizzard's MOBA), which combines all of their properties into one - WarCraft, StarCraft, Diablo, and Overwatch -- so it's got The Lich King, Falstad Wildhammer (the dwarf on the gryphon), and Tychus Findlay in the Terran Marine armor.
Havent watched in maybe years but this just came up in my feed. UA-cam stopped recommending these vids in my feed a long time ago. I wish you all the best
Jay mentioned quick release fittings which I had used in a build about 10 years ago using Lian Li extended case and had an additional external cooler that connected to tubing through a special slot PCI slot cover and I used Koolance quick release fittings. They are a twist-lock fitting similar to a BNC or cable connector and when you remove it both ends seal up automatically.
I love theses!!! And I know you said you don't want no health advice, but I think these videos ,and the ones where you guys sit around and shoot the breezed are fun ,and a healthy distraction. So keep it up. More Phil and Nick is good too.
The Full Motion Sims are DOF Reality and the H3 is $2500 to $2700. I got a chair on Amazon $150 that reclines for both driving and flight sims. I built a PC for a retired race car driver here intown, and he wanted the H3 which comes with 3 motors.
The guy who said he was on a commercial ship, I'm not surprised he has a desk. I was a Merchant Marine, and every ship I was on my room had a desk. I was just a lowly deck ape, but when you only have 26-36 people working on board, there's plenty of room for housing. I was also in the Navy, and those ships on the other hand... that's where they cram as many people into a space as possible. I had to share my berthing space with 200 roommates. I was on an aircraft carrier. I don't think there was enough space allowed for a desk until an officer hit lieutenant, and they still had to share the room with someone. Working on commercial ships is a dream compared to military vessels.
Waaiittt!!! You didn't even noticed that "N00BIFIER" is another UA-camr like yourself?!? I recognized his Setup before even noticing his name at the top screen! He recently had a Video of his Father (late 70's) playing on the LEFT SimRig! He professionally installs RacingSimRig for the very same company you see in the Setup! I've been following him for a few years! He even has a specific channel designed for RacingSimRig stuff! You'd really get along with him! He's Canadian, like me. And from my understanding, he only lives about 1h or so away from me 😅 ANYWHO! Enough said!
Awesome video and I agree with Jay on the best set up. Bring Nick and Phil more on camera and help them find their niche, help them rise to the occasion. I know these are terrible circumstances but this may be a sort of blessing in disguise, or perhaps, something that will help Jay, Phil, and Nick grow as a fellowship in such a way that will push them all to heights never imagined before. Godspeed and most of all, great video. ❤
13:10 I did the same thing as I build a 8x8x8 shed but I did it up nice. Concrete floor and a 30amp breaker box so I could put a mini split in it. I used it for several months as my office and had an AC unit in the window to keep me cool because my PC was also cooking me alive in there. My setup is now back in my garage and the shed is serving its original purpose... A chicken coop XD. Yes I built a climate controlled space for my chickens and ducks since it can get over 100f and below 20f here at its extremes.
Ive been praying for your life every day and i hope you are doing well Jayz! Keep up being the nicest person you are, we all love you brother! God bless you
Can confirm the Midwest (WI) sloped ceiling upper rooms. My house has them. Kids’ bedrooms and half bath up there. Anytime I use the bathroom there I rest my head against the sloped ceiling. And almost every time I access the attic space I hit my head standing up, as the access doors are these little half doors that would he over for like Frodo, but I’m like 6’2. 😝
Great timing! I'm building a new desk and will be redoing my whole setup within the next few days. So I can hopefully get some good ole inspiration in a vid like this.
Really liking the look of 14:00! Any idea where I could get a desk like that? The light above the monitor is great, the backlighting, the plants. Very relaxing.
Damn, I knew I saw that crazy setup somewhere. Turns out it's Noobifier's xD I watched some of his Constellation Alpha reviews, back when I was convinced I could afford a space simulator setup
With the Carl-B top, could you have some kind of metal strip attached underneath to get rid of the sag? Or perhaps build the tabletop into the wall studs and wooden wall braces?
My stuff is not nearly as impressive, but I recently got a pc for my wife up and running next to mine and I'm really proud of myself for finally getting that done.
Quick connect idea, hydraulic hoses have a quick connect system on bobcats to attach different attachments. It’s prettt simple connect that uses ball bearings on the collar. I think it should work with water aswell. Maybe already out there.
Those Alienware cases were built by Chieftec and they were robust, spacious cases. As far as late 90s building goes they were among the best for building powerful and tidy setups which is why Alienware must have chosen them.
You would love the look of my lap top with a mega usb hub feeding 5 or 6 external drives, some big, some small with wires everywhere. Guitar cables , audio interface next to a couple guitar amps next to a 3D printer and some dental lab equipment just to make sure theres no free desk space. The other side of the room has all my RC stuff. I like to call it "Licorice Spagetti"
I think it would be really cool and unique for you to build a cooling set up externally. Koolance makes some really interesting coolers, from an "almost" AIO that has pump, fans, rad, and controls that you mount externally, to even sub ambient coolers. Supposedly the "AIO" has a cooling capacity of 900w with a 25c delta to ambient.
hey there jay much love we all hope you get back to feeling well again real soon! remember to take it easy and take plenty of you time that you need to get to getting better.
@JAYZTWOCENTS Thanks for the mild roast... @11:52 mark yes my signs are straight from Amazon and if you read them they are spelled wrong too. As the two fans when I upgraded to the 7900xt it was too long with the fan in front so until my Y70 case comes in im just leaving the double fan. Thanks for the feature.. Love your videos...
TC Helicon Gaming just came out with an update before Christmas and they are putting a support team together again for future updates. Units are still available to purchase as well (2:45)
instantly recognised Nobifiers setup. He also does youtube reviews of simulator peripherals and such, so it makes a bit more sense to have those setups....
7:10 my setup made it! Glad you approve of the majority of it. My desk is about 6 years old now, hence the terrible sag! Need to update to a proper butcher block that is longer so everything is centred as well! So many awesome setups in this.
If I'm looking at the right build. I love what you did with the wall behind it. Cool stuff!
@@BenMagargeeyeah, right setup! It didn’t turn out exactly as I imagined but I love it.
Hey Jay hope you're feeling okay today. We love you and we hope you're feeling back to normal soon. As always, fantastic content.
Jay needs to retire and find something new cause he keeps this up he won't have any company left exiled by all companies
@@ShadowBoss0001 exiled my ass
It's impressive to see how creative and varied everyone's customization can be. The garden shed conversion and the clean, wood-toned setup especially caught my eye.
Damn Jay you are so close to 4 million. Well done!
what were they offended about?@viperpit-lr2rp
@viperpit-lr2rp offended about what?
@@scottjgray83 Who knows. People wake up offended these days.
Didn't know that his social blade never showed 4 mil but i hope he makes it ..
I've seen people even getting offended by giveaways, not because they didn't win (at times) they are offended by other people giving away things overall. @@scottjgray83
the n00bifiers setup is sweet. I have tested it a bunch of times, and it is epic. The monitors seem a bit high as the motion systems is at rest(down) but raises up significantly when turned on. Cool to see him featured on your show 😁
i have also tested the setup and it's AWESOME!!!
Phil's laugh never fails to brighten my day!! Love these videos and so glad they are back (hopefully)!
Imagine Phil and Luke from LTT at a comedy show...lol
He seems cool, but that's definitely not the kind of laugh you'd want to hear, walking down a dark alley at night.
3:09 that's Noobifier! He is also a UA-camr and is former Canadian Military, also he does full motion simpit setups for a living. Contact him if you want to get setup with a rig.
Keep these going, love a light hearted glimpse at what other people do with their setups.
We need Nic and Phil on Mic, the audio is horrible for them. Love these segments though.
The RTFM setup would fix the audio problem, and I'm surprised that they didn't use it like they did in the past when all three of them reacted to setups.
@@shadowwolf2608 agreed
@@shadowwolf2608 I tried searching for 10 minutes and can't get anything else other than "read the F***ing manual" meaning for RTFM (or a variant replacing the F word)
what does RTFM mean in your context?
@DragoNate it's a live show that they do. Look up rtfm show.
@@dfsgaming1 oohh gotcha. thanks!
YAAAAY ANOTHER SETUPS REACTION. It's always fun to hear y'all's feedback about setups and I can't wait to be able to show you what I have planned when I bring it into the world. :3
For a quick disconnect cooling you might try dry break fittings. We use them in drag racing for things like transmission lines so we don’t have to drain fluid out of the lines and cooler when swapping transmissions. They are a bit pricey but would probably work for rapidly swapping a liquid cooler.
Yasssss! I’ve been waiting for these to return! I love this series.
Love these... Don't stop doing these Jay! Easy content for you guys to be all on camera as well. Good to see other people have cable nightmares too...
Team - saw Jay's Tweet on the fundraising scams and so I did the right thing - bought a couple of shirts from your store! Keep up the great work and Jay - take care of yourself! Nic and Phil have your back and I for one am NOT going anywhere. This channel and team ROCK!
2:32 that does have cooling, that unit at the bottom of the door is an ac infinity cooler
The retro builds didn't enough love!
I remember those Alienware cases being all over Tigerdirect, tons of knock offs or similar dups some that era.
And that Voodoo tower - what a brand - got absolutely destroyed when it got bought by HP.
Love the reaction video guys - keep up the great work!
Bring these back 😎🤘 feels like people are still feeling the after effects of the horrible pc market we had a few years ago. Glad its doing alot better
@realfallenfoe was my absolute favorite setup in this lineup.
Thanks, Jay!! Love you guys!!
I will always support you guys and am praying for you to recover fully.
My setup is the one at 6:04! The fact that you think it’s promo level quality is a compliment lol. Thank you!
2:40 what you pointed to as the UPS is actually a thermostat controller fan/vent mounted into the bottom of the door. Pretty clever idea really.
Yup, that's me. It's an AC Infinity intake fan. That hallway stays pretty cold, so it pulls in air and a huge AC Infinity T5 in the rear pulls out the hot air.
The last one was my favorite by far! So clean, warm, earthy, lively and relaxing.
1:56 I used an Antec clone case, called the X-Superalien back in 2003, until 2019 when I built my current rig in a Lian Li 011 clone, which wasn't shown, again.
3:17:as someone who originally comes from Nebraska I can attest that basements are pretty cool
those colored alienware cases look like old chieftec cases, I loved my old blue chieftec Matrix circa 2004
Lovely set ups.. that last one is delightful.
Yes!!! Another one of these types of videos. Let's goo!!!!
i should find and send that old pic of my pc full of spider webs
I love this series. Is it a series? I love these videos, lol. Fun for all, easy for you to do, and literally endless!
its needs to be a series if its not for sure😂
I love these videos. Wasn't able to submit my setup since I was at work when you tweeted out. I'm hoping next time you do this I'm home to send pictures.
This was great fun! Hope you do bring it back as a series, with everyone like this!
love these! lots of inspiration for what i'm finishing up now came from watching and taking little bits here and there from your reaction videos
keep it up!
I've missed these videos. Jay's reactions to bad cable management are always funny 😂
For the Karlby/Alex drawer desk. I used that idea but subbed the Karlby (didn't like the MDF for reason pointed out in video) with an actual butcher block wood counter top from Home Depot got an unfinished one (but they did have finished ones) and stained it myself and came out to the same price.
5:00 - the backdrop behind the desk with The Lich King, is from "Heroes of the Storm" (Blizzard's MOBA), which combines all of their properties into one - WarCraft, StarCraft, Diablo, and Overwatch -- so it's got The Lich King, Falstad Wildhammer (the dwarf on the gryphon), and Tychus Findlay in the Terran Marine armor.
Havent watched in maybe years but this just came up in my feed. UA-cam stopped recommending these vids in my feed a long time ago. I wish you all the best
The builds that are funky and janky looking are the ones I love, it makes me feel like my set up is not so bad!
The cherry blossom fan cover @6:13 is a nice touch.
I hope you stay healthy and well, we appreciate and love you Jay.
that one setup was Neon from Starfield! awesome
I love the final PC, definitely gonna steal/use some ideas myself
Jay mentioned quick release fittings which I had used in a build about 10 years ago using Lian Li extended case and had an additional external cooler that connected to tubing through a special slot PCI slot cover and I used Koolance quick release fittings. They are a twist-lock fitting similar to a BNC or cable connector and when you remove it both ends seal up automatically.
Love you Jay and Co. Keep pushing through my guy!
That last one is my favorite not just cause it looks so cozy but because dude is a hendrix fan and had the vinyl displayed above the record player
I love theses!!! And I know you said you don't want no health advice, but I think these videos ,and the ones where you guys sit around and shoot the breezed are fun ,and a healthy distraction. So keep it up. More Phil and Nick is good too.
The Full Motion Sims are DOF Reality and the H3 is $2500 to $2700. I got a chair on Amazon $150 that reclines for both driving and flight sims. I built a PC for a retired race car driver here intown, and he wanted the H3 which comes with 3 motors.
I love setup reactions! but most I love YOUR setup reactions. its like the mother of setup reactions to me. thank you for another great video!
Always enjoy the setup videos. Thanks for the Karlby "sag" tip!
The guy who said he was on a commercial ship, I'm not surprised he has a desk. I was a Merchant Marine, and every ship I was on my room had a desk. I was just a lowly deck ape, but when you only have 26-36 people working on board, there's plenty of room for housing.
I was also in the Navy, and those ships on the other hand... that's where they cram as many people into a space as possible. I had to share my berthing space with 200 roommates. I was on an aircraft carrier. I don't think there was enough space allowed for a desk until an officer hit lieutenant, and they still had to share the room with someone. Working on commercial ships is a dream compared to military vessels.
always nice to see an ideas of how to decorate my future room!
Waaiittt!!! You didn't even noticed that "N00BIFIER" is another UA-camr like yourself?!?
I recognized his Setup before even noticing his name at the top screen!
He recently had a Video of his Father (late 70's) playing on the LEFT SimRig!
He professionally installs RacingSimRig for the very same company you see in the Setup!
I've been following him for a few years! He even has a specific channel designed for RacingSimRig stuff! You'd really get along with him!
He's Canadian, like me. And from my understanding, he only lives about 1h or so away from me 😅
ANYWHO! Enough said!
@Noobifier1337
Thanks for such a kind post.
So fun to see Noobifiers setup and to recognize it before he said who's it was.
Awesome video and I agree with Jay on the best set up. Bring Nick and Phil more on camera and help them find their niche, help them rise to the occasion. I know these are terrible circumstances but this may be a sort of blessing in disguise, or perhaps, something that will help Jay, Phil, and Nick grow as a fellowship in such a way that will push them all to heights never imagined before. Godspeed and most of all, great video. ❤
13:10 I did the same thing as I build a 8x8x8 shed but I did it up nice. Concrete floor and a 30amp breaker box so I could put a mini split in it. I used it for several months as my office and had an AC unit in the window to keep me cool because my PC was also cooking me alive in there.
My setup is now back in my garage and the shed is serving its original purpose... A chicken coop XD. Yes I built a climate controlled space for my chickens and ducks since it can get over 100f and below 20f here at its extremes.
Hearing all three of you laughing together was actually fun viewing. More please.
Ive been praying for your life every day and i hope you are doing well Jayz!
Keep up being the nicest person you are, we all love you brother!
God bless you
Can confirm the Midwest (WI) sloped ceiling upper rooms. My house has them. Kids’ bedrooms and half bath up there. Anytime I use the bathroom there I rest my head against the sloped ceiling. And almost every time I access the attic space I hit my head standing up, as the access doors are these little half doors that would he over for like Frodo, but I’m like 6’2. 😝
Oh TheNoobifier1337 watching you 😯 talk about a small world. I love that guy. My goto starcitizen guy.
Nice to see you here..
Missed these vids
I hope you do more of these videos, I love them.
Almost spit my food out when he said "They Shed" hahahah Thats so funny
12:12 the picture to the right says keep "clam" and game on xD
Great timing! I'm building a new desk and will be redoing my whole setup within the next few days. So I can hopefully get some good ole inspiration in a vid like this.
Love the muse and Queens of the Stone Age posters at nine and a half minutes.👍
Some pretty slick set ups there. Mic up your henchmen for the next one. Looking forward to more of these.
Really liking the look of 14:00! Any idea where I could get a desk like that? The light above the monitor is great, the backlighting, the plants. Very relaxing.
Look at you the new racing sim legend!!!! lol haha keep up the good work J..
I've got Twitter notifications on but I ALWAYS manage to miss these somehow, I wanna get my shitty setup in one of these one day 😂
13:34 "It ain't stupid if it works" and yeah one of those mobile air coolers would be good in there.
I love the rain forest setup.
DO MORE of THESE!!
I always love these since my setup is usually so garbage it will eventually inspire me to convert it to a somewhat competent setup in the future 😁
Congratulations jay on ur nearly 4million subs i hope u get better soon.
Damn, I knew I saw that crazy setup somewhere. Turns out it's Noobifier's xD I watched some of his Constellation Alpha reviews, back when I was convinced I could afford a space simulator setup
Can you imagine Jay, Nic and Phil. Doing commentary like this in a Mystery Science Theater 3000 format. I think that would be hilarious 😂😂😂😂
With the Carl-B top, could you have some kind of metal strip attached underneath to get rid of the sag? Or perhaps build the tabletop into the wall studs and wooden wall braces?
@9:22 Thats a really cool portable gaming pc on a budget. Idk why anyone would use it, but it looks really cool.
2:02 looks like Chieftech? I still have a Matrix in use :)
My stuff is not nearly as impressive, but I recently got a pc for my wife up and running next to mine and I'm really proud of myself for finally getting that done.
Quick connect idea, hydraulic hoses have a quick connect system on bobcats to attach different attachments. It’s prettt simple connect that uses ball bearings on the collar. I think it should work with water aswell. Maybe already out there.
I've been wanting this back! Nice decision crew
Love your positivity, Jay its awesome. All the best wishes going forward for 2024 and 4 mill subs wow
6:05-6:25 This setup REALLY spoke to the girl in me!! SO cute!
Noobifier does content for star citizen, joysticks, and sim pits. I don't think he pays for those rigs. I believe they are reviewed units.
The server closet at the beginning had a PS5 in it too!
Love the format!!!
Those Alienware cases were built by Chieftec and they were robust, spacious cases. As far as late 90s building goes they were among the best for building powerful and tidy setups which is why Alienware must have chosen them.
You would love the look of my lap top with a mega usb hub feeding 5 or 6 external drives, some big, some small with wires everywhere. Guitar cables , audio interface next to a couple guitar amps next to a 3D printer and some dental lab equipment just to make sure theres no free desk space. The other side of the room has all my RC stuff. I like to call it "Licorice Spagetti"
3:06 noobifier! Knew it when I saw it!
7:57 that desk is SAGGING. holy moley.
Jay called Link "the Zelda"....
ANARCHYYYY!!
I think it would be really cool and unique for you to build a cooling set up externally. Koolance makes some really interesting coolers, from an "almost" AIO that has pump, fans, rad, and controls that you mount externally, to even sub ambient coolers. Supposedly the "AIO" has a cooling capacity of 900w with a 25c delta to ambient.
I feel called out; as an ex-Mac user as well, My PC is VERY similar to that setup at 4:10, including the orange lights in the computer. :D
7:50 yep my roof is the same way. i’m 6’3 and have definitely hit my head more than once 😅
I have one those "mess hiding room deviders". Except I don't hide a mess but instead block the air from my window A/C from freezing me out.
Thanks for bring this back, was fun.
hey there jay much love we all hope you get back to feeling well again real soon! remember to take it easy and take plenty of you time that you need to get to getting better.
@JAYZTWOCENTS Thanks for the mild roast... @11:52 mark yes my signs are straight from Amazon and if you read them they are spelled wrong too. As the two fans when I upgraded to the 7900xt it was too long with the fan in front so until my Y70 case comes in im just leaving the double fan. Thanks for the feature.. Love your videos...
TC Helicon Gaming just came out with an update before Christmas and they are putting a support team together again for future updates. Units are still available to purchase as well (2:45)
instantly recognised Nobifiers setup. He also does youtube reviews of simulator peripherals and such, so it makes a bit more sense to have those setups....