Bauer that was amazing! I watch all kinds of fabrication vids with gobs of fancy tools. What you just did was nothing short of brilliant. Kudo's man, from someone over 65 who's been a DYI'er forever. Simply brilliant.
Great Stuff!! The camera had a good view of angle-grinding with drill-press, but your view was somewhat obstructed looking overhead, yet you still achieved good accuracy -that was impressive.
Well done!! after reading some of the negative comments, it is obvious they have zero creative skill or ambition. The more you design and create, the better you'll get!
8 років тому
Very nice ! I also watched the other one because I like to hear (not so) boring commentary on stuff that is (not so) clearly shown on the video :-)
This is how I do my knives to where I work because they are really hard on them and they always end up with deep chips, knicks, and gouges in the blade,idk if the idiots hit the knives off the table or what they do with them but this is a very effective way to remove a lot of metal quickly, except I clamp the bandfile in the vice, level it, and feed the knife through heel to tip. you might like this way better to because you can easily flip the knife through the other direction to do the other side and it's relatively very easy to hold the correct angle this way with a little practice. This way gives me a little better control of how much pressure I want to apply to the blade itself if I want to remove less metal or I'm try to weaken my Burr a little before honing. This way won't get you knives hair whittling sharp, but I guarantee you that it's close to utility blade sharpness and I can do a box of about 20 knives in 15 minutes this way, as I just finish deburring it with a round steel honing file from Walmart for about 10 bucks.
Wow that was like a rock concert amazing sound score , I was transported body and soul to another dimension , this made the power file look so awesome , It conjured up visions of unimaginable power , wielding a mighty sword on a battle field , it made me want to throw all my other manly power tools in the bin and go buy one of these immediately , this thing makes King Arthurs Excalibur , look like a flaccid toothpick ... thankyou so much this has changed my life ...forever ..........uh huh
Initially, I was going to comment on how you could have saved yourself some time by buying inexpensive pre-made parts that would work, but fuck that...impressive skill and creativity. Very impressed. Just fucking make it.
manofausagain no. the drill shank is the same as the cutting tip. The shank is not heat treated on a twist drill and thus it remains soft. It has sufficient carbon to take a heat treat
Its F'in hard to weld small parts with the stick welder, well done for making this a success (video and home made tool) Was the drill press lathe inspired by Michaelcthulhu (Irish mike - big sword dude)?
Hallo, mir ist aufgefallen dass der Fräslift an deiner Tischkreissäge dem von Matthias Wandel sehr ähnlich sieht. Da ich gerade dabei bin mir selbst einen zu bauen stellt sich mir die Frage ob man den Kipp-mechanismus braucht oder ob der eher unpraktisch ist. Hast du deinen Fräslift fest auf 90° eingestellt oder ist er verstellbar ?
Nice job working with the tools at hand, however, a mini milling machine would have made the much easier and provide greater precision. Perhaps you should consider adding a mini milling machine or a mill-drill to your toolset or workshop as it would dramatically increase what you can do and I think you would enjoy it. Peace!
That attachment part is absolutely beautifully "machined" with ordinary tools. Love it.
FinnCrafted keren sekali buatan luar negeri
Bauer that was amazing! I watch all kinds of fabrication vids with gobs of fancy tools. What you just did was nothing short of brilliant. Kudo's man, from someone over 65 who's been a DYI'er forever. Simply brilliant.
Effing cool. You rock dude! The way you crafted your retaining pin on your drillpress angle gringer lathe was anazing.
love out of the box thinking. German ingenuity at its best. wonderful and inspiring.
I'll never cross you Cosmas, not even for a second!
Cosmas, you must be a fan of Make It Extreme.
Great Stuff!! The camera had a good view of angle-grinding with drill-press, but your view was somewhat obstructed looking overhead, yet you still achieved good accuracy -that was impressive.
Yeah sometimes the camera is getting in the way a little bit :D
Well done!! after reading some of the negative comments, it is obvious they have zero creative skill or ambition. The more you design and create, the better you'll get!
Very nice ! I also watched the other one because I like to hear (not so) boring commentary on stuff that is (not so) clearly shown on the video :-)
Cool :)
Gotta love the DIY approach. Good skills man.
Man are you inventive. Nicely done sir
thats bad ass very smart you can make anything if you put your mind to it and have the right tools
This is how I do my knives to where I work because they are really hard on them and they always end up with deep chips, knicks, and gouges in the blade,idk if the idiots hit the knives off the table or what they do with them but this is a very effective way to remove a lot of metal quickly, except I clamp the bandfile in the vice, level it, and feed the knife through heel to tip. you might like this way better to because you can easily flip the knife through the other direction to do the other side and it's relatively very easy to hold the correct angle this way with a little practice. This way gives me a little better control of how much pressure I want to apply to the blade itself if I want to remove less metal or I'm try to weaken my Burr a little before honing. This way won't get you knives hair whittling sharp, but I guarantee you that it's close to utility blade sharpness and I can do a box of about 20 knives in 15 minutes this way, as I just finish deburring it with a round steel honing file from Walmart for about 10 bucks.
I'm very impressed ! Excellent idea .Dude,you rock !!!
Igor Krstic o
oh my god this guy is a genius
Отличная приспособление на болгарку! Молодец Cosmas Bauer!
Андрей Попов في 99حح9
Great build! And you've got to respect a guy wearing a Guinness shirt!
Wow that was like a rock concert amazing sound score , I was transported body and soul to another dimension , this made the power file look so awesome , It conjured up visions of unimaginable power , wielding a mighty sword on a battle field , it made me want to throw all my other manly power tools in the bin and go buy one of these immediately , this thing makes King Arthurs Excalibur , look like a flaccid toothpick ...
thankyou so much this has changed my life ...forever ..........uh huh
Initially, I was going to comment on how you could have saved yourself some time by buying inexpensive pre-made parts that would work, but fuck that...impressive skill and creativity. Very impressed. Just fucking make it.
Awesome build! Definitely on my to-do list!
Brilliant, no problems with belt wondering?
Amazing Work, nice seeing this short video as well !
Gonna try this out my self.
do you have any adjustments for keeping the sanding belt from walking to the left or right? Nice build
Dudes got skills, brains too...
good to see, my desirous collection of tools at one pl Ace.
pretty cool build 10/10
Nice work and cool project
I am impressed... You are an artist and a master too!!!
wow...that is what you call ingenuity
You inspired me to build my own and I love it! Thanks for the inspiration!
Very cool!
yes super
This is the case. Beautiful work...
really good cosmas!
Man, I need this gear, please come to Brasil, please. This is amazing, Bro.
Nice work and nice sweatshirt!
Mind blowing. Perfectionist you are
Creative use of tools!
Is this your answer to Make It Extreme? Great tool!
Dude u got skills. great job
Could you make a long neck angle grinder attachment?
Thanks.
amazing build, which electrode do you use for welding??
This is so cool! What magic is used to keep the belt in place?
Magic of properly aligned wheels with the touch of a crown to them :)
made my one to suit length of a standard 75 mm belt sander belt. Can split into 3 or 4 belts for this machine.
Great Job! Is the grinder variable speed? Or does a single speed 10,000 RPM grinder work with the belt?
Yes it does work great.
that's an awesome idea!
I saw you had a template you were using, do you have plans available?
You can watch the long version for a better look at the plans.
You are brilliant. keep up the great work.
awesome work dude👌👌
2:47 - 3:00 = so you first heatthreat it, and next you weld it? doesn't the weld make your hard steel soft again? otherwise, great project!
I doubt that little spot weld heated it up enough to make it soft.
it high speed steel it can be heat treated because its high carbon steel.
for future info the shank of a drill is usually made from softer steel and not HSS. otherwise you would ruin your chucks. you could use a bolt shank.
manofausagain no. the drill shank is the same as the cutting tip. The shank is not heat treated on a twist drill and thus it remains soft. It has sufficient carbon to take a heat treat
Congratulaciones from Honduras
extremely talented
amazing video!!!! do you sell this stuff?
Amazing !! you're a genius creator :)
Its F'in hard to weld small parts with the stick welder, well done for making this a success (video and home made tool) Was the drill press lathe inspired by Michaelcthulhu (Irish mike - big sword dude)?
You are a monster, good job
Dude this is sweet. Subbed
Very good project!!! Great!!!
Do you have plans it?! In Pdf?!?!
what is the orange magic stuff you put on the wood after 4:00 ?
3:16 You have no principles! X'D
Thumbs up.
What?
Cosmas I don't get it either. Nice build!
Cosmas I think he means you don't follow the rules as demonstrated by your clever use of the drill and angle grinder to shape a pin.
@Cosmas Indeed, William Parrish Got it right. :)
It is one of these granddad's tricks type of things :)
Insane talent! Way cool!
Love the milling machine think I will build that
Hallo, mir ist aufgefallen dass der Fräslift an deiner Tischkreissäge dem von Matthias Wandel sehr ähnlich sieht. Da ich gerade dabei bin mir selbst einen zu bauen stellt sich mir die Frage ob man den Kipp-mechanismus braucht oder ob der eher unpraktisch ist. Hast du deinen Fräslift fest auf 90° eingestellt oder ist er verstellbar ?
Meiner ist fest auf 90°. Ob du den Kippmechanismus brauchst kann ich nicht sagen ;)
Ich denke ich werde meinen Fräslift auch fest auf 90° einstellen, später kann man ja immer noch einen kippmechanismus ergänzen.
Cosm
Sev S.
That thing rocks! Nice ;)
very nice, do you make and sell these? If so I'm interested. Thanks
How do you set the tracking?
very talented..awesome DIY
Just excellent! very well done but I really have to save up for ALL the tools that you have used. excellent though...
Wow, you made that look easy! If I tried to do that it would take me a week lol. Will you make me one for 1" bands? Haha
yeah. great job. impressive craftsmanship!
Where you buy the vice
Hey cosel, kommst du aus Irland? Weil du einen Guinness Pulli anhast?
Useful and nice invention, apply for patent.
Great skill bro
Great job!
Well done!
Damn! what a nice latch!
Ok it look hard where can I just buy one?
Online
the fkn master ,you did it
I think you had a nice idea, but you need to include a securit there. Because If the tape breaks, it can cut your face.
Talent is a god gift.!! perfect work. you have a bright further.. "Cs"
einfach nur Klasse ....Daumen hoch....
Great built. Compliments
nicely done!
Tyler Hensley
excelente trabajo, gracias por compartirlo,saludos desde Chile
He is a genius.
But by time get all this tools we can but 10 belt sanders.
Nice job working with the tools at hand, however, a mini milling machine would have made the much easier and provide greater precision. Perhaps you should consider adding a mini milling machine or a mill-drill to your toolset or workshop as it would dramatically increase what you can do and I think you would enjoy it.
Peace!
You should consider sending me one over.
Yeah right, is tomorrow okay?
Of course! Thanks :)
good job done ... it seems you are doing something Extra then ordinary :)
Flawless. True Master.
so good bro
proprio necessaria la musica spacca timpani?
Nice work. They have a tool like that you can buy. I have one.
Hey man nice idea, great job. U make one for me and shop for ebay?
Teflon for main roller !
Boa noite por quanto você faz uma pesa desa de linchar que usa na lixadeira
great job
super bien réaliser mec bravo
Bisakah saya mendapatkan plans dari alat yang buat saya juga ingin membuatnya
Wow you're really smart
isso mim deu uma excelente ideia para desbaste de facas na minha cutelaria,vou fazer um prá mim agooooora!!!!
genius !!!
Simmilar edit to Make it extreme :D
What a perfect job. =)