Wow, Brian, you are so kind and generous by sharing the secrets of construction. The world of amateur and enthusiasts tensor ring creators will greatly thank you. Many blessing bro.
Wow...this is master level art and craftsmanship Brian!. I tried making these myself and never got anywhere close to this. Plus, Since this is energy work you want the physics to be correct. Again...bravo!👍 Peace Lou
THANK YOU SO MUCH Brian !! It is wonderful of you to gift us this instructual video. It taught me so much. I am so grateful for your help and expertise. All the very best !!
looks great. Would like one of these. I just checked the price on an 8" generator on the site, and its 409.000 canadian. What size is that one and what size is the one advertised here? Thankyou
This is not really a how-to video, yet we do have a how to on creating the spheres and generators. We use oxygen acetylene and bronze brazing rods. But we do not go into how to for brazing, which you should be able to find a video tutorial on brazing :)
hi, im just wondering, to make theses do you use enamel coated copper wire or none enamel coated copper wire, or does it matter what you use? take care and have a greaty day!
check ebay. When you get one, it will most likely have to be shaved by a milling company, as the cones are old and used and full of dents. We never found a current cone manufacturer anywhere in the world.
2:24 "... ensuring that each wire meets back upon himself and creates a perfect joint ..." wow, how do you know or how you are checking this? because two types of connection are possible. 1:52 did you slide all the way on the twisted wire for pairing it? this gives me a headache, please help.
If the wires are offset, then the ends will meet together. you can offset the ends more than what is shown here, and then it will be obvious which ends meet.
@@Twistedsagecom , but how do you offset a wire when the other end of both wires are flat on the table? Also, you'd still have to twist the wire to make sure they align. Kind of hard when dealing with 8 gauge wire and the wires are somewhat twisted to capacity.
0:53 "hundred thousandths of a centimetre" incredible precision how it possible? 0.00001 cm -> 0.0001 mm please can someone correct me if I wrongly understanded what is the mean by this statement
We use a Digi-scope to double check our cuts. It will measure to .001 of a mm. I see that would actually be 10 thousandths of a cm. Thank you for helping correct this statement!!
@@Twistedsagecom I Reaaalllllyyy Want to believe this stuff! (doesn't require beliefs if it actually works though lol). ALL these people can't be fake reviews or placebo, so it's GOTTA be worth something. I just don't grasp the 'science' of it, and I understand science is the world religion of measuring God lol, it's a useful joke. ANYWAYS, I do not comprehend, that if these rings require THAT SPECIFIC of a measurement, to attain THAT SPECIFIC of a frequency (144 mHz, or a harmonic of the speed of light), the TINIEST mis-grind or mis-polish would make it SLIGHTLY OFF of that harmonic, therefore not being of use. Do these resonances work even if it's .1% removed from the target frequency? Would they still help? Because music tuned to A = 432hz has healing properties, a small move to A = 440hz produces anxiety and the sense of separation, fueling ego-mindedness. If these tensor rings are even slightly off, wouldn't they produce harmful frequencies? Appreciate any response brother.
Wow, Brian, you are so kind and generous by sharing the secrets of construction. The world of amateur and enthusiasts tensor ring creators will greatly thank you. Many blessing bro.
So appreciate the demonstration of what it takes to create these and all the other videos you have created.
You guys are master ring makers in all the realm. Thanks for the video I enjoyed watching the building process of the tensor generator.
Wow...this is master level art and craftsmanship Brian!. I tried making these myself and never got anywhere close to this. Plus, Since this is energy work you want the physics to be correct. Again...bravo!👍 Peace Lou
Thank you so much for existing! Thank the Universe!
Much Love from Switzerland.
THANK YOU SO MUCH Brian !! It is wonderful of you to gift us this instructual video. It taught me so much. I am so grateful for your help and expertise. All the very best !!
I have one of these and love it. Two simultaneous reactions to this video:
... WOW i love seeing how it's done and ...
I CANNOT HEAR YOU !!!
Dziękuję, bardzo mi pomógł ten film.
Z miłością i światłem.
Thanks for the video ❤️ love that last bit where you trow it in that thing to be polischt al in one go amazing
That's absolutely amazing! Thank you for sharing.
Thanks, Brian ... You do nice work.
Thank you for sharing the process.
Высокопрофессиональная работа'все четко'с благодарностью из России🤗
I love this thank you... Will be ordering again soon
Cool a lot of work for sure!!
looks great. Would like one of these. I just checked the price on an 8" generator on the site, and its 409.000 canadian. What size is that one and what size is the one advertised here? Thankyou
hi, everything is very clear and interesting, I would just like to understand what type of welding machine I use when brazing, thanks
This is not really a how-to video, yet we do have a how to on creating the spheres and generators. We use oxygen acetylene and bronze brazing rods. But we do not go into how to for brazing, which you should be able to find a video tutorial on brazing :)
hi, im just wondering, to make theses do you use enamel coated copper wire or none enamel coated copper wire, or does it matter what you use? take care and have a greaty day!
Where can I find the large steel cone shaped sizer please!!!
check ebay. When you get one, it will most likely have to be shaved by a milling company, as the cones are old and used and full of dents. We never found a current cone manufacturer anywhere in the world.
Beautiful 😍
very interesting thanks for sharing all the technique. greetings from ARGENTINA TRANCITA ILLUMINATING AND NEVER STOP BRIGHT.
2:24 "... ensuring that each wire meets back upon himself and creates a perfect joint ..."
wow, how do you know or how you are checking this?
because two types of connection are possible.
1:52 did you slide all the way on the twisted wire for pairing it?
this gives me a headache, please help.
If the wires are offset, then the ends will meet together. you can offset the ends more than what is shown here, and then it will be obvious which ends meet.
@@Twistedsagecom , but how do you offset a wire when the other end of both wires are flat on the table? Also, you'd still have to twist the wire to make sure they align. Kind of hard when dealing with 8 gauge wire and the wires are somewhat twisted to capacity.
thank you..you are so good person
extremely helpful
As usual you are superb.. I Love your videos. Could you tell the benefits of golden fire generator?
0:53 "hundred thousandths of a centimetre" incredible precision how it possible? 0.00001 cm -> 0.0001 mm
please can someone correct me if I wrongly understanded what is the mean by this statement
We use a Digi-scope to double check our cuts. It will measure to .001 of a mm. I see that would actually be 10 thousandths of a cm. Thank you for helping correct this statement!!
@@Twistedsagecom I Reaaalllllyyy Want to believe this stuff! (doesn't require beliefs if it actually works though lol). ALL these people can't be fake reviews or placebo, so it's GOTTA be worth something. I just don't grasp the 'science' of it, and I understand science is the world religion of measuring God lol, it's a useful joke.
ANYWAYS, I do not comprehend, that if these rings require THAT SPECIFIC of a measurement, to attain THAT SPECIFIC of a frequency (144 mHz, or a harmonic of the speed of light), the TINIEST mis-grind or mis-polish would make it SLIGHTLY OFF of that harmonic, therefore not being of use.
Do these resonances work even if it's .1% removed from the target frequency? Would they still help? Because music tuned to A = 432hz has healing properties, a small move to A = 440hz produces anxiety and the sense of separation, fueling ego-mindedness. If these tensor rings are even slightly off, wouldn't they produce harmful frequencies? Appreciate any response brother.
Н О Р М А Л Ь Н О 👍👍👍
1:34 what is the reason for hammering?
to align the crystalline structure, which hardens the wire.
Awesomeeeeee
Thanks for sharing ... ;-)
I have noticed very bad energy production when its soldered with 1 end sticking out even slightly.
@ ua-cam.com/video/jwalOlY0XTk/v-deo.html in the video, where did you get this Mandrill?
you have to look on ebay to find old blacksmith mandrels. they usually need taken into a machine shop to be turned to get the divits out and polished.