Question, we took over a place with the same system, is there a service IP address to access and reset the previous owner? Does it require license or another hardware?
Proper voltage for your LP1502 to all other boards come from FPO250 system power. If your system exceeds 12 mercury boards, you would want to get individuall power for each board through you D8 (Distribution Board).
Question, we took over a place with the same system, is there a service IP address to access and reset the previous owner? Does it require license or another hardware?
Grate video , how do you connect to the ACM, the IP ....50 is the master controller? have in ACM embedded?
Thank you
Good video thanks for the information, I have a question/ from ware I have to grab power for the LP1502 ? From the 12v power supply?
You could get power from the fpo75, but i usually see power coming from the D8 terminal.
Proper voltage for your LP1502 to all other boards come from FPO250 system power. If your system exceeds 12 mercury boards, you would want to get individuall power for each board through you D8 (Distribution Board).
valuable video... i wish it was wider than portrait
can you do a setup for gentetec
This is lenel or acm motherboard
Avigilon.