You can opt for razor style wheels and tires like I did for my sportsman. Also you can get better arms for extending it properly. I have two Polaris quads I tow with my 08 ram 2500.
put that new welder to work and make new upper shock mounts that will make the shocks tuck up in further so the a arms are flatter across but you will still have stock ride quality, i like the tire poke with the wheels flopped around but being on stock steel wheels i think it looks funny, keep up the great work hopping one day ill get the chance to meet you the family and crew!
I think the thing i like most about your videos is the fact that everything is blacked out. I hate chrome and black is my favorite color, keep up the great work hopefully some day Ill get to see ya at an event.
Just a set of after market wheels normally make them stand out Tires I don't know much about because my Commander wasn't even a year old and I lifted it. Lowering it you might try a set of springs off a lighter duty ranger or ones that have been over loaded a lot so they have been weaken Now the next time you go to change the spring lift, what I do is use 2 ratcheting straps to compress them
If you swap the wheels inside out you’ll probably have to drill for new valve stems and turn the factory ones inside out. I done it befor and had clearance problems.
Greg when you get taillights grab some LED ones instead of tinting the stock style again, look better and are gonna be brighter under tint so you don't get rear ended
On the danger. If you take the tire off of the wheel you can take a steel bolt in valve stem and put it in the rim backwards with the stem faceing in the rim to plug it with pressure and redrill a hole on the opposite side a place a new valve stem in that will make it so the stems dont hit the calipers
Hey guys, I have a bad vacuum line but haven’t been able to find a diagram of the vacuum lines. It’s a 2004 Dodge Ram 2500 diesel. If there is a video showing where the vacuum lines run through the engine bay and where it goes through the firewall it would be much appreciated
Move the top shock mounts to the inside holes, it will also lower it and soften the suspension, I am a Polaris tec and work on these every day, cant wait to see the end result with the turbski!
You should totally go with the Method 401 UTV Beadlocks w/ 28-30" Tensor Tire "The Regulator" A/T tires. That would be the best, in my opinion. Keep up the great videos, man!
You could get some stubby metal valve stems installed on the Danger... I don't know how close it is but if all you need is a half inch that might do it. Also the 05 would look pretty sick towing the 1st gen. Just sayin'.😎
Hiya Greg been watching for the last 6mths or so and really enjoy your videos on the danger wheels pop the tyres off the rims weld up valve holes and redrill new valve holes it's something we do in the UK for off road use to get a bigger offset
Morning Greg A! Been following you for a long time man, you’re always very informative and you’ve helped me A LOT with my own 12V build. 4th Gen is looking real good too!
Hey Greg, what kinda led fogs would you recommend. I bought the Opt7 cree bulbs not realizing they work best with a reflector in front. Looking to find the brightest 6k bulbs out there??
Hey does anyone mold there roll pan into fender ? My buddy did his when I was in high school. Hadnt really seen many folks do it. Its allot of work but is super clean .
Greg, check out the Pro Armor whiteout tire, it comes in a 27x14x14 tire size and Pro Armor also makes some 14x10 wheels and you can get them at most every Polaris Dealer. Super ATV makes forward front control arms for rangers but I don't think they are compatible with the older diesel models.
I can’t wait to see you in Scranton. Man I wish my truck was done!
My son was born on mother’s day so not to far off from baby a and he loves the ceiling fans also😂 as did I when I was a baby apparently ....
the single cab drag truck will be my favorite !
Seeing the tow-pig always makes me smile inside.
You can opt for razor style wheels and tires like I did for my sportsman. Also you can get better arms for extending it properly. I have two Polaris quads I tow with my 08 ram 2500.
Custom forces for the Ranger now that would be sick smoke out the tail lights.
She looks just like her mommy!! Congratulations again
put that new welder to work and make new upper shock mounts that will make the shocks tuck up in further so the a arms are flatter across but you will still have stock ride quality, i like the tire poke with the wheels flopped around but being on stock steel wheels i think it looks funny, keep up the great work hopping one day ill get the chance to meet you the family and crew!
She’s big my son used to like to look at the fans keep up the good work
The 08 will always be my favorite
Keen follower from Australia. Your uploads are always a highlights of my day. Keep it up man.
08 is my favorite for sure, love that truck
I think the thing i like most about your videos is the fact that everything is blacked out. I hate chrome and black is my favorite color, keep up the great work hopefully some day Ill get to see ya at an event.
The 08 is def my favorite truck
Just a set of after market wheels normally make them stand out Tires I don't know much about because my Commander wasn't even a year old and I lifted it. Lowering it you might try a set of springs off a lighter duty ranger or ones that have been over loaded a lot so they have been weaken Now the next time you go to change the spring lift, what I do is use 2 ratcheting straps to compress them
If you swap the wheels inside out you’ll probably have to drill for new valve stems and turn the factory ones inside out. I done it befor and had clearance problems.
I can't wait to see the first gen done and the new 08 tire and race truck built and I love the old tow rig
Greg when you get taillights grab some LED ones instead of tinting the stock style again, look better and are gonna be brighter under tint so you don't get rear ended
Yup! "Danger"...thumbs up!!
can’t wait for the ranger build !!!!!
2 inch spacers front and rear for the wheels
On the danger. If you take the tire off of the wheel you can take a steel bolt in valve stem and put it in the rim backwards with the stem faceing in the rim to plug it with pressure and redrill a hole on the opposite side a place a new valve stem in that will make it so the stems dont hit the calipers
We get to see a burnout in the 08 before new tires right?
Flatbed Danger with same color wood as your trailer?
Hey guys, I have a bad vacuum line but haven’t been able to find a diagram of the vacuum lines. It’s a 2004 Dodge Ram 2500 diesel. If there is a video showing where the vacuum lines run through the engine bay and where it goes through the firewall it would be much appreciated
Utv setup, method 406 matte black and super swamped tsl atv
Move the top shock mounts to the inside holes, it will also lower it and soften the suspension, I am a Polaris tec and work on these every day, cant wait to see the end result with the turbski!
Hey Greg A! Me and my dad run the morimoto fog lights on our 2017 2500 and they are amazing! I'm sure you will love them.
I love your trucks, they're all badass in their own right...
2in spacers with 14-16 in rims 👍
Love those new fog lights..
Like take it out An put it in backwards then just re drill a hole in the front man keep up the vids I met mikey g at rudys opener !!!
05/08 combined I have an 05 I love but it's a long bed
You should totally go with the Method 401 UTV Beadlocks w/ 28-30" Tensor Tire "The Regulator" A/T tires. That would be the best, in my opinion. Keep up the great videos, man!
You could get some stubby metal valve stems installed on the Danger... I don't know how close it is but if all you need is a half inch that might do it. Also the 05 would look pretty sick towing the 1st gen. Just sayin'.😎
When’s the straight pipe and wheels coming for the dually?!👀
The 08 is my favorite by far! is it a 1 ton?
Always love your videos! Keep up the great work.
Hiya Greg been watching for the last 6mths or so and really enjoy your videos on the danger wheels pop the tyres off the rims weld up valve holes and redrill new valve holes it's something we do in the UK for off road use to get a bigger offset
I love all the trucks but the first gen is my favorite!
Morning Greg A! Been following you for a long time man, you’re always very informative and you’ve helped me A LOT with my own 12V build. 4th Gen is looking real good too!
Love watching your videos bro keep up the good work
You can drill a new hole for the valve stem and put the old one in backwards for a cheap solution.
Jegs n summit have ton of stuff for pit carts would be worth checking out
Love those fog lights for the 4th gen
You’re such a good father!
VLEDS has some sweet plug and play LED bulbs that fit perfectly in the 4th gens
Put some white out tires on from polaris they are like 14 inch wide
they make spacers for the danger. they have studs that screw on the the existing studs to space out about 2"
Fixing to order a ez-LYNK tuner for 2016 ram 2500 with 68rfe trans.. should I get hpp or ppei?
You should get bronze fuel Anzas d583 for the ranger
For short trips you should take the 08 because we all love the 08
Hay Greg hauling the ranger! Looks like John doc.!!
My son loves ceiling fans also i hold him up so he can spin the blades and he thinks its the funniest thing.
Greg the tailgate issue is the tailgate bushings
I think a matte or bedliner paint job on the ranger would look sick.
Drill a hole for the valve stems on the outside of the wheel and flip the valve stem around to fill the rear hole
Where exactly is this youtube call out challenge at in North Carolina?
Where in nc is the UA-cam callout gonna take place?
That 08 is one sweet looking rig.
Plan on see you in nc at benson hope to have my 4th gen back going by then
Try some spacers to keep the valve stems away from the calibers
Walker evens wheels are nice. Check them out. I think they have a bunch for the side by sides.
You can get adapters to put whatever bolt pattern you want on. Hell you can put the tow pigs wheel and tire setup on it..
You should turn the 08 into a big heavy duty work truck with aftermarket bumpers an just anything that makes it look heavy duty
Hey Greg, what kinda led fogs would you recommend. I bought the Opt7 cree bulbs not realizing they work best with a reflector in front. Looking to find the brightest 6k bulbs out there??
Check out MSA wheels for the ranger
Shorter Valve stems will solve the wheel issue! Did it all the time with ours ..
Damn of course your gonna be in Scranton witch is 30 mins from me when I’m gonna be coming home from North Carolina that day!
Do you by chance remember what video you showed the motor mounts in? I need the part number lol!! Thanks
Will civic wheels fit?
Exact fogs I will be getting for my 4th gen whenever that is I get one
They love ceiling fans my son is almost 2 and still just chills out and watch's them LOL
Greg I have the same ones I love them in my 18 man they are brighttt. Tell me how you like them
I can't wait until June 23rd. Finally get to meet you in person, I'm from swansboro nc
Jason Hunt I'll be there also. I'm on the other side of the jville lol
I was so pissed I was at Daytona on Tuesday and Greg was there Friday 😂😂
Where in NC is it?
Sagen Shiell Galot motorsports park
Drill a new hole in the other side of the rim for a new valve stem and flip the old one inside out done it on my buddy's banshee and my 400ex
what kind of bulbs are you running on the 08 I wanna run different ones on my 06 but the computer wont let hid's work. Love the first gen and the 08.
Hey does anyone mold there roll pan into fender ? My buddy did his when I was in high school. Hadnt really seen many folks do it. Its allot of work but is super clean .
I vote for the smooth taillights for the 08.
Check out the msa diesel rims for the ranger.
How are the tires on the 08 in the winter? I love how they look, but Canada problems.
You need a set of 15" wheels and then put some car tires on them. Also chop the cage.
On my gas ranger I did that and flipped them and it looked pretty funny and it definitely was wide
if the wheel and tire package is too heavy, it wont be able to do burn outs. that cvt system does not put the power done well.
put on a super single for the rear duels
I had problems with leds burning out prematurely because they were getting hot
Greg, check out the Pro Armor whiteout tire, it comes in a 27x14x14 tire size and Pro Armor also makes some 14x10 wheels and you can get them at most every Polaris Dealer. Super ATV makes forward front control arms for rangers but I don't think they are compatible with the older diesel models.
Morimoto are the absolute best you can get.
Good to see you back home man
What do you want for that first gen tailgate badge? Highly interested
What you think about black led taillights?
You had a perfect chance to put in some of “the office” quotes when you said you would be in Scranton
What size tires are you running on the first gen?
No 20x12s on the Danger?
Pull the valve stem inside and drill you a hole on the other side of the rim with new valve stem cheep but it works...
yo any news on the american force wheels and are you going to level the dually
Put the valve stem upside down in the original hole and drill a new hole on the dished side
Methods for the win!
28” zilla’s ferda side by side??
Love the earlier videos, the trucks are looking awesome!!