How to Replace Passenger Side Engine Mount 2002-2006 Honda CR-V
Вставка
- Опубліковано 4 тра 2022
- Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ib/1AEMT00330
This video shows you how to install a passenger side engine mount on your 2002-2006 Honda CR-V. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
This process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Socket 1aau.to/oc/1AXAA00017
• 14mm Socket 1aau.to/oc/1AXAA00015
• 17mm Socket 1aau.to/oc/1AXAA00015
• 3/8 Inch Air Impact Gun
• Torque Wrench 1aau.to/oa/1AXAA00044
• Block of Wood
• sanding disc
• Floor Jack 1aau.to/oa/1AXAA00068
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Got one for 09 ?
thank you for the detailed video. saved me a lot of work. however, i dont know if its movie magic or not, but your torque procedure is pretty hilarious. "ok, let me snug these down with a 1/2" drive impact driver, then torque them to 40 ftlbs." the socket doesnt even rotate the slightest bit before the torque wrench beeps. "yup, perfect". 😂
Just did the engine front and rear lowers.
Did right side 10 years ago, doing it next weekend plus the driver side upper.
Good vids, thanks.
Exelente video gracias por compartir tus conocimientos.
The best video about this subject... Really ..
Great videos one thing I will say is I never even if I thread it in by hand use air or impact to bottom out always by hand to remove not an issue but all it takes is one cross thread when you send it and your in for a bad day.
My mechanic is saying my right mount is sagging but I had it done a year ago. Is this guy trying to take advantage? surely a new mount would last longer than that.
5:04 that bolt the one that connects the brace piece to the mount.... I couldn't get mine to torque properly. It just kept going farther and farther down with a lot of the bolt threads showing above the mount. Anyone else run into this?
Ain’t you the guy from 1Aauto lol
Lol
what is that ground wire for.... thanks...
Its just a general ground, chassis to engine. It does not ground any specific component.
Stay gold.
using an air ratchet to remove a rusted 10mm ground bolt
#O.O
Vaselin !!!!!