Marie, I have just started a job teaching pottery. Your videos have taught me so much about the craft, and how I want to teach it. Thank you for being the soft spoken guide into a new chapter of my life. You are a beautiful woman, thank you for these videos. (We also have the same kiln, so exciting!!)
I am so happy for you Elisabeth.😊 It is great to hear that you are teaching😍 What a wonderful compliment. I'm glad I could help you on your journey to help others learn the craft. 😍
I just ordered my first kiln - 818-3. Very excited & nervous. Thanks for this video - and all of your videos - this is a brand new adventure for me - 60 years old and a little bit freaking out - so out of my element here but soooo excited.
Hi Kelly. So exciting. Welcome to the wonderful world of crafting pottery. I remember how nervous I was when I got my first kiln. I didn't touch it for months because no one told me about Kilns. In class, we could not go near them. Enjoy your new KIln. I love my 818 😊
That is great to hear. I just love it! The 3 inch brick is the way to go. The room does not get as hot and you use less energy. Here is the link to where I got it geni.us/GCrzBDK 😊
Hi, So excited for you! I felt the same way before I got my kiln. I love my Kiln! It is very smart to get informed before you take the big step. Kilns are very safe if you play by the rules when installing and using them. These 2 posts will help. Here are the links for you potterycrafters.com/how-to-use-a-pottery-kiln-at-home/ potterycrafters.com/are-pottery-kilns-safe/
Oh my gosh!!! Thank you so much. What an exemplary teacher you are. I am considering adopting an entire ceramic studio and all supplies. My knowledge is limited. I’m a little “scared”. Your voice and demeanor calms me. I’ll be learning so much from my subscription to your site. You are precious. ❤thank you.
You are most welcome! Here is a video on all you need to get started at home ua-cam.com/video/QAdchhoJ-QE/v-deo.html and a post to go with it potterycrafters.com/making-pottery-at-home/ This is a more advanced studio set up. ua-cam.com/video/qvsoGw7q7mM/v-deo.html Welcome to the wonderful world of crafting pottery 😊
Marie, you have kept me from just giving up on my wheel throwing I was ready to sell until I watched your video. I went today and bought the amaco clay #76 you recommended. It made all the difference in the world an the video showing how to center was great! Thank you so much
That is most Wonderful to hear. Thank you for taking the time to write me. I struggled so much with centering until one of my teachers showed me that way. I am so glad it help you you also. 😊
Thank you so much for this wonderful video! Selling pottery has become a main part of my business, and I have reached a point where I should probably get my own kiln instead of paying for it to get fired at a shop but I have been soooo anxious about learning about kilns. Your video makes it seem very achievable and I found your vibe so calm and relaxing and enjoyable to listen to. Thank you! 🥰❤️
That is great, Flynn. I remembered how nervous I was with my first KIln, and no one helped me out. After using my kiln the first time and talking to the techs at Skutt, I was no longer stressed about firing a kiln. I felt beginner kiln users would like to know this stuff. So I put together this video to answer all the questions I received from my viewers to put them at ease. So glad to help. Enjoy your new Kiln. If you have any questions feel free to ask.
Loved the tip about the cone 10 clay with heavy grog for the cookies. They will survive much longer. Since I hate making them and hate throwing them away, I shall definitely use a groggy clay in the future. Thanks! Loved that you left the blooper in. Funny.
So glad it was helpful! I was so afraid to fire my first kiln, it took me months before I did. Getting some important basic information helped a lot. Now it's nothing to fire up the kiln. 😍
This is a wonderful and helpful video! I was wondering if you can recommend a online store to purchase this kiln. It looks like local pottery stores do carry them but they are more expensive than online order, which one would you recommend?
Thank you! Here is the link to my kiln geni.us/GCrzBDK Hope it's cheaper then the local stores. Here is a link to my Kiln post also with other kilns to choose from. potterycrafters.com/buying-a-pottery-kiln/ 😊😊
Love this video answered all my kiln questions as I am an older 3rd Art Teacher Student. I did burn up a table the kiln was on during test fire, I now have it on the blocks as suggested, thank you so much!
Congratulations Peggy!!! How exciting. Glad it was helpful. When you're dealing with high temperatures these questions are valuable to new kiln owners. Enjoy your new Kiln. 😊
I like how you left you foible in. My mom would have said, "You got you tongue wrapped around your eye teeth, so you couldn't see what you were saying." Never could figure out if she was funny or just nuts. Either way she went with it so, we did too. Love your information and company while I work. My shop is too small and full for more than 1 actual person. My next shop is going to be a lot bigger. . . .with a bathroom! And a coffee pot. . . . . And a liquor cabinet with Bailey's in it. ~sigh~Someday~
That's funny. Thank you 😊 That sounds nice. Yes a bathroom would nice. it's still nice to have a shop. I would like my studio space to a little bigger also.
We have a brand new kiln and no experience. Neither the manual, videos or other videos we looked for have told us what the very first firing should be. 04, THANK YOU! I didn’t know if we should take it to it’s peak temperature, do it fast or slow or anything!!
Great question Linda😊 No you don't have to, just take it cone 04 test firing with a witness cone to make sure it fired to temperature on medium speed. This ensures your kiln is operating properly, burns off element oils, and develops an oxide coating that prolongs the life of your elements. Remember first fire is only kiln shelves and posts. After that, you can fire to your desired cone temperature. No need to fire to cone 10 if you don't need to. Glad to help. 😍
I know this is an old video, but I wanted to say that how your videos are informative and inspiring. I just started my journey to start my own business for a passion I had since I was a child
Very good information! I purchased a 30 year old kiln and the fire brick floor had some areas of glaze drip. I am wondering if I should sand lightly and use kiln wash to protect from further damage. Thank you for sharing your knowledge
Thank you Sue 😊 Great question. No, you can not put kiln wash on the bricks. and yes you can remove the glaze on the bottom. The brick is soft so be careful 😊
I’m so happy I found your channel! I’m so interested in pottery and often will get ahead of myself with purchasing supplies. All of your videos have made the process so clear and exciting
Marie...Love all your videos. I have learned so much . The videos on loading your kiln was so helpful. ...Do you think you would be doing a video on the first firing after you get a brand new kiln. I think that type of video would be very helpful. Thanks
Glad it was helpful! Hope this helps with your new kiln😍 3fs7rd1xi6sy2zofjv3g0a0q-wpengine.netdna-ssl.com/wp-content/uploads/FX-INSTRUCTION-MANUAL-FOR-FX-KILNS.pdf
Glad to help. 😊I remember searching for the answers to simple questions I had before I bought my kiln. They were hard to find. We are all new at some time and we want to know basic things before we invest in a kiln. 😀
Impressed you didn’t continue cracking up haha. I’m in Australia about to buy a skutt I’ve learnt so much from this one video. Didn’t have any clues what the 3 meant three inch haha
You said that the kiln must sit on a stand to prevent the floor overheating, but where can we buy tgese stands and what material are they made of that will be strong enough and non flamable metal or concrete? Are the stands dold with a new kiln? thanks. Your videos are excellent 👏 very informative and easy to follow
Hi Marie, I’ve been watching your videos for a couple of months now. I just bought a brand new kiln and will fire my pieces tonight. I already did the test fire with the witness cone, and it worked well. After seeing your whole video (thank you, very informative) I still have one more question, what is your opinion on how full should you kiln be in order to fire properly? I know the load needs to be balanced so that the heat flows freely, and evenly inside, but how full should it be? Thank you!
Hi MammaRoub. That is GREAT. Congratulations on your first Kiln. For glaze firing. I'm not sure if you have seen this one but filled like this video is fine. Here is the link for you. ua-cam.com/video/LsZM6bUmKOc/v-deo.html As long you don't have pieces touching and good airflow. For bisque firing, you can have them touch but don't overstack your bone-dry pottery.
@@PotteryCrafters Thank you so much! What is your opinion on firing a kiln with just a few pieces? Let’s say I have jewelry and only small pieces, is it okay if not all the shelves are completely full as long as I make sure there is good air flow?
Thank you. No, you would not need to candle. Only if your greenware is not bone dry. You would initially crack the lid until the kiln hits 1000F because most of the fumes burn out between 500F and 1000F. Plus, the kiln can't keep up the temperature after that, so the lid should be closed. For more information. Here is an article that will help. potterycrafters.com/is-it-recommended-that-a-pottery-kiln-be-vented/ 😊
Should I do a test firing without any pottery in it for the first time I use my used (but new to me) kiln? Thank you, Maire, for your wonderful videos!
very good question Stacey. Yes with a pyrometric or (witness) cone that you will be bisque firing to so you know if your kiln is accurate. thank you I'm glad they are helpful. 😍
I have an older skutt kiln it is very large but in great shape has three sections , I was wondering if I could take one section off and run it with just the two sections that are left
That is a great question. I have never tried it but based on how the kiln is built, I would say no because of the control panel and the placement of the thermocouple. Although you could call Skutt and ask, they have a great tech service. 😊
Marie I want to say, thank you for the videos, they are really helpful; I am learning so much. I am new at this and i am trying to learn everything that I can before to start doing it. One question: are the pottery Microwave, freezer and Dishwasher safe?
Thank you! Very good questions. These Articles will answer the questions in more detail. Here are the links for you. potterycrafters.com/is-pottery-microwave-safe/ potterycrafters.com/can-pottery-go-in-the-dishwasher/ and this one you will find the question at the end. potterycrafters.com/can-pottery-clay-be-frozen/ Welcome to the wonder world of crating pottery! 👍😊
I have somehow acquired a free kiln in great condition and have a place to set it up, I was planning on doing handbuilding in my apartment and then going out to my dad shop to use the kiln. I have no experience and everything seems so overwhelming, I'm so nervous to try it for the first time. I wish there was a simple to read and follow instructions on how to use it, load it, bisque, fire and unload.
That is awesome! Congratulations on your first Kiln. Yes, it can seem overwhelming at first. That's normal. I remember when I got my first kiln. I was afraid to touch it for months. And now it's fun to fire. Take it one step at a time. The first thing you want to do is a bisque fire and make sure you have Pyrometric (witness) cones to make sure the kiln is firing to the right temperature. I do have a video on bisque firing that will help. Here is the link for you. ua-cam.com/video/LsZM6bUmKOc/v-deo.html After that, if you have any questions on the glaze firing, feel free to ask. Enjoy your new Kiln.
Thank you very much for your rapid response and I’m taking advantage of your kindness asking you which kiln do you recommend for 110 or 115 current so I don’t have to install a 220 volts current outlet and again thank you for your attention
Hi! Thanks for making this video, super informative. I have an additional question. There are several kilns online that have a different maximum temperature. There are some that go to 1100 deg Celcius (2012 deg F) instead of 1260 deg C (2300 deg F). what are your thoughts on having a kiln with a lower max temperature?
Thank you, Joy; good question. At 1100 Celsius, you can only low fire up to Cone 02. While at 1260 Celsius, you can fire up to Cone 9. If you get the high fire kiln, you can fire Low, Mid, and High fire. So, a low fire kiln is fine if you only fire to Cone 06 or 04.
Thanks for the video...very informative Ceramic tile installer since 1988 Looking forward to making my first piece in the near future..just subscribed 🙂
WOW, that's pretty cool, 32 years.😍 Welcome to pottery crafters. I hope you can get some cool decorating ideas and pick up some good tips on pottery crafting. There are so many things you can do with clay and glaze. 😊
Hello, I have an air inlet at the bottom of my nabertherm 45l kiln. On the program preset for bisque and glaze fire it says to close the air inlet for the last 20 minutes. Do you do this and recommend shutting the air inlet at the end of the program ? Thanks
Hi Marie, Thanks, as always, for such a useful and beneficial video! Because of your channel and website, and my own desires and needs as a potter, I am ordering a kiln just like yours today! Hooray! I am SO grateful for your excellent UA-cam channel and all your wonderful articles on your website! My kiln won't arrive until Nov, (Skutt is delayed due to Covid) but I want to be prepared for when it finally arrives. I have questions for you about witness cones and kiln shelves and posts. First, can you please tell me if you make your own witness cones, or do you prefer to purchase them? If you do purchase them, have you found it easiest to order the "self-supporting" cones, or if not, did you either order (or make) a witness cone holder? Next, if you prefer to order witness cones, do you order the "assortment pack" of 4, 5, and 6 cones, or what have you found is best to order? Also do you have a preferred store or online store to purchase witness cones? Phew. That's all my questions about witness cones. Next; have you found you needed to purchase additional kiln shelves and/or posts (other than what came with your kiln)? And if so, what additional kiln shelves or posts have you found you use "the most" and/or what additional shelves or posts do you recommend? And finally, I'd love to see a "how to load the kiln" video. I know you've said it can be like a jigsaw puzzle loading the kiln. Okie dokie, thanks again! Just like you, I plan to fire at Cone 5 and 6. I'll be brushing on Amaco Potters Choice glaze combinations, (love those colors and layering effects so much ~ especially those blues and greens) Have a great day!
That is so wonderful💖 Thank you very much Mary Jean,😍 I am really Happy for you. 😃You will love this Kiln and the technicians are so helpful. I have cone 5 and cone 04 witness cones that stand alone. I use them once in a while to make sure she is firing at the proper temp. My friend has an older kiln and uses three-cone sizes. she fires at cone 5 and will use a 4, 5, and 6 witness cone. You shouldn't have to do that with the new kiln. One cone will do. I bought my witness cones at the clay arts studio where I took classes. If I run across where you can get them I will let you know. I have not had to get more shelves. I use three on average. And the posts they provide are enough. I usually use the 4 and 5-inch posts. I was thinking of doing a loading video thanks for the suggestion. 😊
@@vickivanriel3082 Thank you, and thanks so Marie's wonderful videos and website, I purchased the perfect kiln for my needs and desires as a hobby potter. So grateful!
I greatly enjoyed your video! I'm just starting my long desired hobby of pottery but did not have the time due to school & work. Still, I recently became motivated to change all that and do what makes me happy and I am glad to have subscribed, I will be keeping all these pointers in mind ! Thank you
Hi Marie, great instruction for a new kiln owner. I did a test firing. Cones indicated heatwork didn’t come up to temp, Cone 6. I’m going to run another test and keep the posts away from the pyrometer pegs. I’ll see how that works. Also, you mentioned making cookies with cone 10 clay with grog for mid range firing. Do you kiln wash the cookies? The shelves? Thank you so much for sharing. LJ
Thank you, Linda 😊 I get cone 10 clay with grog because the cookies don't crack as easily and last longer. I was going to try kiln wash on my cookies but haven't yet. You can put kiln wash on shelves. I don't because my cookies work great, and I just don't want to deal with the maintenance of kiln wash. 😊
I have four kilns I have bought over the years I have small kilns and one that was given to me it's about four feet tall and maybe twofeetin diameter. That's a lot for someone who just wants to make pottery.
That is a good question. The technician at Skutt told me not to because the bricks are soft and porous and affect the insulation. Plus, you don't have the ability to scrape the old kiln, wash it off, and replace it. The kiln wash will eventually flack off and float onto your pottery. If the glaze does get on the bottom, you can gently remove it and even use fire brick fix if you need to.
Thx for the info. I have a manual kiln and fired a bisque for 6.5 hours. The 05 bar bent and the kiln sitter shut down. Now many potters have told me that I should spent longer bisque firing ? I had it 2 hours on low , 2 on medium and the rest of the time on high. What do you think?
You're welcome. I fire medium to cone 04 with no problems. You can bisque fire medium or slow. Even a combination of both. But I would not recommend high firing. It's ok for glass firing, but clay does not like it. 😊
Your videos are very helpful thank you. I just started making my own pottery. I just bought a brand new kiln and I have a question. I did 2 firings after the 2 firings the outside of the kiln lid started to have cracks I was wondering if that is normal?
Good question. Yes, cracks are normal because of how the brick expands and contracts. Keep an eye on it. If the cracks become bigger call the manufacturer. A little is normal A lot is not. 😊
I want to thank you for these videos. I just bought my first skutt and my greenware is almost dry enough to fire. I have embedded nichrome wire into the back of some tiles that I made. Can the nichrome wire touch the kiln shelf? Or should I make sure it does not? Thank you so much I appreciate you; any other tips about working with the wire would be appreciated. You make everything so clear!
Hi, Thank you very much. The Nichorme wire that I have says it can withstand temperatures up to1200 degrees Celsius to 2192 degrees Fahrenheit. That is right around cone 5 so if you fire below cone 5 should be fine. It shouldn't melt to the shelf. That sounds cool. Hope it turns out.😊
Glad it was helpful! Many potters new to using kilns have a lot of good questions. After all, they do heat up to over 2000 degrees. Some basic knowledge goes a long way. Enjoy your new kiln 😍 This post may be helpful also. Here is the link potterycrafters.com/buying-a-pottery-kiln/
Good Day, I ordered a brand new Caldera XL test kiln. When I opened the packaging to inspect the kiln, I noticed it have some incomplete sealant between the floor and wall bricks. In addition, I noticed the lid had a chipped about 1"x0.5" and another minor chip. There was also a heating element kind of off-seated. When the vendor got back to me, they were saying this is normal, to be expected, and most seasoned potters would find these things cosmetic and can be easily sealed/repaired. However as a customer of various products (stained glass to clothes to food), I can't find their explanation logical. I actually do quality for work and if a supplier would have shipped a part in that condition, I would reject it and then write the supplier up dinging their ratings. Then it was starting to sound as if, they were going about to hint that I could do the minor sealant repairs. This is starting to sound/smell fishy, I wanted to get your opinion and thoughts. Is this really normal? Or is this just the result of poor packaging? Or are they trying to pull a fast one because I'm a novice? I greatly appreciate all and any advice you have.
Good Day, Jan. No this is not normal. If any potter buys a new kiln they want it in NEW condition. Even if it's cosmetic. That would be fine if it were a used kiln. But no potter should do repairs to a new kiln. (that's why we buy new) I hope they can resolve this for you and give you a kiln in new condition that you ordered. 😊
@@PotteryCrafters Thanks. So it sounds like they ARE trying to pull the wool over my eyes and don't want to replace it. I think they are trying to justify their mistake, by saying since I'm a novice potter that i don't know and that i have to be an experienced potter to appreciate the kiln. But you are absolutely right, I bought a brand NEW kiln not USED kiln.
Yes, It's not your reasonability to fix a new kiln. Even if it got messed up during shipping. Fire brick is really soft and can chip very easily, but they should know that and pack the kiln properly. 😊
Great and informative video! I'm actually in the process of picking out a new kiln and I can't decide between the KMT-818 and the KMT-822. My concern for my area is that even though I have the space in my garage for this sized kiln, my garage tends to get hot and doesn't have much air flow. I do have a fan above to circulate the air but I worry living in Florida with the heat and the humidity, my kiln might shut off if it gets too hot. What would you recommend? Thanks!
Thank you Sandra😍 They are both good choices. I have the 818 with the 3inch brick. The 818 is 2.3 cubic feet and the 822 is 2.9. Those are both with the 3-inch brick. Because of the heat issue, I would strongly recommend the 3-inch brick, because the kiln will shout down if your control box goes over 160 degrees. I'm in the desert and never had it shout down. The 3-inch brick gives you more insulation in between, plus does not let out as much heat. you can check out the loading video ua-cam.com/video/LsZM6bUmKOc/v-deo.html to see if it is the right size for you. Plus check out potterycrafters.com/buying-a-pottery-kiln/ The 818 is in there. If you need a bit more room I would go with the 822. The apps are 33.4 and watts 8000 The 818 apps are 26.7 watts 6400 and costs me around $3 for bisque and $5 for cone 5 fire. Hope this helps. Happy glazing 😊
Hi I had a question! Can I keep the newspaper in when I fire? I used newspaper in the big kilns at my school, but I have a small kiln here at home and I don’t know if I can use it in my small electric kiln? Also loved the video it answered a lot of questions I had!
Thank you. That's a very good question. Yes, you can, but you don't want to use too much newspaper. You may get ashes from the newspaper in the kiln. But that's ok just vacuum out your kiln before you glaze fire so the ashes don't fly around and land on your glaze ware. Happy Glazing😍
Yes. A use a separate vacuum cleaner I keep the garage. I am not sure how many pounds or pieces I bisque fire. It can very. I can fit around 13 to 18 pieces for glaze firing, depending on sizes of the pottery. 😊
Yes, absolutely I love this Kiln. I would Definitely go with the 3 inch brick. Your kiln cools down slower, the outside of your kiln does not get as hot, and is more energy efficient. Here is the link if you want to check it out geni.us/GCrzBDK
Wonderful video! I've just bought a pretty old duncan teacher kiln and am in the process of hooking it all up (I loved how the first question was about the electrics which is exactly what I'm doing now!) anyway, quick question if you don't mind - Is it OK to put round shelves in even though the kiln is octagonal? I'm having difficulty sourcing octagonal shelves. Bonus question - The only shelf I have is the bottom one which was cracked in half, I've repaired it with fire cement and it fits together well, am I OK to place some pottery on that and fire or should I never fire on that shelf at all? (lastly, underneath thst shelf which was cracked is the very bottom of the kiln which had a matching crack, it seems to be some sort of flakey asbestos type material (I know it's not asbestos though!) is this a concern? It's not made a hole or anything. Thanks in advance John
Congratulations John😍 Those are good questions. Yes, you can use round shelves as long as you have a clearance of about 1 inch around between your selves and the sides. You can use the bottom shelves, but I would suggest putting extra support posts on each side of the cracks. Also, check out my loading video for placements of your support posts. The flaky material sounds like Kiln wash. I am 98% sure it is. That's why I don't use it. I use kiln cookies. ua-cam.com/video/FNzQiAsUQsc/v-deo.html Happy glazing. Enjoy your Kiln 😍
@@PotteryCrafters great stuff, thanks for the answer. The flakey stuff isn't kiln wash though. I actually just watched your kiln loading video (very good) and the difference between your kiln and mine is that in your kiln the very bottom doesn't come out whereas mine is actually a removable shelf, so when you lift it out you see the foam/insulation, and it's this that's actually cracked. I'm sure though that once the shelf goes back over it, it will be fine as it will be protected. Thanks for your reply.
Glad I could help. WOW, that's an older kiln. 😃 Do you have brick on the bottom? Make sure there is airflow between the bottom of your kiln and your shelf. also, make sure you vacuum that stuff out before firing 😍 Happy glazing
If you need help with choosing supplies you can go to my website potterycrafters.com and potterycrafters.com/recommended-tools/ also potterycrafters.com/buying-a-pottery-kiln/ if you are looking for a kiln or potterycrafters.com/pottery-wheels-reviewed/ Pottery wheels 😍
Great video! I'm a complete newbie and soaking up all I can before purchasing my first kiln. If you have time to answer a question I'd appreciate it. I'm not going to start off making pottery items but clay tiles - I won't be doing a bisque fire - I'll start with a cone 5 glaze, followed by an 04 for the details - how often would I vacuum out the kiln? At the same rate? Thanks so much!
Thank you Kelly. Welcome to the wonderful world of crafting pottery. In that case, I would vacuum around every 8th fire or so. Keeping the elements clean extends the life of your elements. Plus, you still get dust from the fire brick in your kiln. If you have any more questions, feel free to ask. Here is the link to my videos. www.youtube.com/@PotteryCrafters/videos I have over 100 for you to choose from. Plus, my potterycrafters.com website will help. Enjoy the journey. 😊
Hi Marie. I find your videos very helpful and enjoyable. I just installed a small kiln in my home studio and although I've been a potter for a few years I'm new to working a kiln. I've only just done a bisque firing and I'm looking forward to glazing .When it comes to glaze firing I don't understand anything about holding time and why I would need to do that. Can't I just follow the prompts for cone 5 or 6 firing with no hold time at the beginning or at the end? What's the purpose of holding? Have you done a video about that? If it matters I have an L&L E18s with a genesis controller. Thank you for such great videos.
Thank you Carmela 😊 Because many controllers are a little different it's hard to give a proper example. Holding allows your glaze to cure giving you less chance of pinholes. For your controller, this is hold time - Press ENTER. HOLD and 0.00 will flash. Enter a hold time or leave at 0.00. Numbers to the left of the decimal are hours, to the right are minutes. If you don't want to hold slow fire is the next best thing. It's not all about temperature. it's also about time. Rush a glaze fire ruin a glaze fire. it's so exciting to glaze fire for the first time. Happy glazing 😍
Can cones be reused? Help…! I was using cone 6 and my kiln turned off after the 3rd hour during the firing process. The kiln has cool down now, and I would like to know if I need to replace the cones before I restart the kiln again or should I use the same cones that are in my kiln right now?
Hi the video was very useful but my kiln just has a number scroll for temperatures so I have a couple of questions how do I know what temperature to put it on and will it be different for each piece of pottery I make and how long will a piece of pottery take to Kim since I can’t seem to find anywhere where it says it is done since it seems a very manual kiln
Good question Will, This chart should help. 😊 It gives the temperature you should fire to according to the cone size on your clay and glazes. www.skutt.com/pdf/op_manual/2009_op_manual/KM_Manual-09_Appendix3.pg44.pdf
Hello! Thanks for tis great, informative and generous video. I would like to ask you a question: I have a new kiln and I've done two firings. When I enamel fired, I noticed that the pieces move inside the kiln and they end up in a different position from where I first placed them. These pieces are little human figures of about 12cm high that I lie on metal spikes so that they don't stick to the shelves. Do you know what the reason for this moving around may be? Has this ever happened to you? Any tips? Thanks!!!
Hi Augusto. Thank you I'm glad it helped. It sounds like little human figures were walking around in the kiln. 😅 Just Kidding 😀 That is funny that they have moved. No I have never heard of that. I will ask my fellow potters and get back to you. That is pretty interesting. Enjoy your new Kiln.
Thank you. So glad it helped. I made the video because I too felt that way when I got my first kiln. And I know other potters that felt the same way. I have the Skutt 818 -3 The 3 inch brick makes it more energy efficient and it's 16-1/2" wide and 18" Deep. Fits 10 to 15 pieces depending on the size of your pottery. Plus it fires to cone 10 which means when you mid or low fire, your elements will last longer. Here is a link for you to check it out geni.us/GCrzBDK 👍
Hi Denise, You can try putting a 10-minute hold on at the end. This allows the kiln to reach the even temperature throughout the Kiln. Holding more than 20 minutes will raise the cone size to cone 7. 😊
Marie - I want to buy an electric kiln here in Europe but I would have to position it outside. It is humid where I live (island life 🌴). Is this advisable or absolutely not doable? I could build a cover/enclosure. Thanks for any help!! I’ve been really enjoying your videos 🙏🙏🙏
Thank you 😊 Yes, you should be able to as long as you build a cover so your kiln does not get wet. My friend has a kiln outside under a cover so it does not get rained on 😊
Can I fire (in the same kiln load) a low fire 06 clay with a low fire 06 glaze along with mid fire (cone 6) greenware pieces that fire (to become bisque) at 06?
That is a very good question. Yes you can. This post will help. here is the link for you. potterycrafters.com/bisque-and-glaze-fire-pottery-at-the-same-time/ It is the last question in the post. 🙂
You're so welcome! In school they would not let us near the kilns. They didn't even give us a kiln 101 course. I was afraid of them for a while. I'm glad it helped. 💖
@@PotteryCrafters same here, college (I was in the art department but not a ceramic major), the studio I know go to, and the pottery supply store all have the employees work the kilns. Which totally makes since, I just need to learn more if I eventually what to get my own kiln ❤️
Hi Jesse, I do not have a store set up yet. Thank you for asking. On a mobile phone, hit the title under the video. Then hit the SHOW MORE SECTION. and on the computer, hit Show More. You can also check out my website. Here is the link for you potterycrafters.com/ and this section with over 100 videos for you to choose from. ua-cam.com/users/PotteryCraftersvideos 😊
Hi Marie. I have a couple of questions for you if you could be so kind as to take a minute out of your time to answer. I am getting ready to fire up my Skutt KMT 818 for the first time (waiting for my pyrometric cones to arrive) and I've read a couple of conflicting things about putting kiln wash on the bottom of your kiln. Some sites say to do it but others say to put kiln wash only on the shelves. 1.) Do you recommend kiln washing the bottom of your kiln floor to protect it? 2.) Should I bisque fire my new shelves in an empty kiln once before I apply the kiln wash? Thanks so much.
Congratulations on your new kiln! Those are very good questions.😊 No, you should never put Kiln wash on your bricks, because Kiln wash does not last forever. The kiln wash will seep into the soft brick and there is no way to scrape it off and replace it. After a while, it will flack off the brick and land on your pottery. I have a video on protecting your kiln selves that may be helpful ua-cam.com/video/ss-kqVRXhl8/v-deo.html You have to be careful with some pottery sites, as I have also come across some misinformation. You want to fire to cone 04 with just the shelves and posts and no kiln wash on your shelves. This extends the life of your elements and using pyrometric cones makes sure your kiln is firing to the proper temperature. Enjoy your new KIln 😍
@@PotteryCrafters Thanks so much. Most of the info I had read or seen already said not to add kiln wash on the walls and floor, but my boyfriend said he read it should be applied to the floor. So I started researching it and found conflicting recommendations. My reasoning to him was exactly what you just said about it flaking off and not being able to scrape it. I had watched this video twice to see if I could find my answer and saw your latest video about protecting kiln shelves a couple of days ago. After I left my question yesterday I went back and watched it again and got my answer. I really appreciate you taking the time to answer and I appreciate all the work you put into your craft and educating us newbies & novices. Could you maybe do a more in depth tutorial on pyrometric cones and how to use them in a kiln? I know it's probably not the most interesting of topics when it comes to pottery, but it's very important we all understand how our kilns are firing & running. Thanks again!
You are so welcome, glad to help 😊Thank you so much for the suggestion. You are right there are parts of pottery that don't seem that interesting but are very important to our success rate. I was actually thinking I should do a witness cone video.
Hi Shawn. I really love my Skutt Kiln. The 3 inch brick makes it more energy efficient and it's small enough that you don't have to make a lot before you fire. Around 10 to 15 pieces depending on the size of your pottery. Plus it fires to cone 10 which means when you mid or low fire your elements will last longer. Here is a link for you to check it out geni.us/GCrzBDK 👍
Hi Marie, I'm applying for a grant and figuring in the cost of buying a brand new Skutt kiln. What is your opinion on APM elements? Are they worth the upgrade? I love your videos!
Thank you, Cassy. That is great! Think of how high and how often you will be firing. I would recommend the APM elements if you are firing to Cone 10 and holding at high temperatures. Enjoy your new Kiln. 😊
I also had a crack on one of my shelves and cut it in half (with a concrete saw) is that ok? I was very worried that it would split and ruin everything
Hi Marie, Thanks for this great video. I just recently got an 822 and am learning about firing. Do you prop your lid until the kiln reaches a certain temp (1000 Degrees F) then close it for rest of the firing? I’ve read many articles that say you should do this if you don’t have a downdraft vent. I have an overhead vent only. Thank you!
You're welcome. Yes I prop the lid until 1000 and open the top peep throughout the firing 😊 This allows the fumes to escape and not settle back on your pottery or your elements 😍 Enjoy your new KIln
Hi Linda. No I don't have the space to be a production potter. This is just the perfect size for me. So I can make larger taller pieces and don't have to make a lot before I fire. It's 16-1/2" a cross and 18" Deep Here is the link for you to check it out geni.us/GCrzBDK
Thanks!
Thank you for your support ❤️
Love that you didn’t edit out that blooper.
Thank you Kevin 😊
I was going to comment similar 😅 🧡
@@PotteryCrafters great tips, trying to think of ways to use this info to increase the sex too, then it doesn't have to be a blooper
😃
I had to rewind to make sure i heard that properly. Was not expecting to hear that 🤣🤣🤣.
Bob Ross vibes and I love it.
Thank you 😊👍
Marie, I have just started a job teaching pottery. Your videos have taught me so much about the craft, and how I want to teach it. Thank you for being the soft spoken guide into a new chapter of my life. You are a beautiful woman, thank you for these videos.
(We also have the same kiln, so exciting!!)
I am so happy for you Elisabeth.😊 It is great to hear that you are teaching😍 What a wonderful compliment. I'm glad I could help you on your journey to help others learn the craft. 😍
Came here with the same sentiments! Love these videos and your soft spoken style. Thank you so much for taking the time to make these videos ❤
Thank you so much for taking the time to leave a most wonderful comment. I'm glad they are helpful for you. 💖
I just ordered my first kiln - 818-3. Very excited & nervous. Thanks for this video - and all of your videos - this is a brand new adventure for me - 60 years old and a little bit freaking out - so out of my element here but soooo excited.
Hi Kelly. So exciting. Welcome to the wonderful world of crafting pottery. I remember how nervous I was when I got my first kiln. I didn't touch it for months because no one told me about Kilns. In class, we could not go near them. Enjoy your new KIln. I love my 818 😊
Hey 👋 how do you like your kiln now that you’ve had it for a while? I’m looking at getting one too
That is great to hear. I just love it! The 3 inch brick is the way to go. The room does not get as hot and you use less energy. Here is the link to where I got it geni.us/GCrzBDK 😊
@@twixxbars I have just started looking and planning on getting a new kiln. So excited but a bit spooked too. All this info is really helping me.
Hi, So excited for you! I felt the same way before I got my kiln. I love my Kiln! It is very smart to get informed before you take the big step. Kilns are very safe if you play by the rules when installing and using them. These 2 posts will help. Here are the links for you potterycrafters.com/how-to-use-a-pottery-kiln-at-home/ potterycrafters.com/are-pottery-kilns-safe/
I just bought a used kiln and I'm eager to do my first firing but also nervous! Very informative video, thank you.
You're welcome Chase. 😀So glad it helped. Enjoy your New - used kiln. 💖
Seasoned potter here, still love your videos and pick up a few tips and reminders. your voice is very calming.
Thank you Penny💖
Oh my gosh!!! Thank you so much. What an exemplary teacher you are. I am considering adopting an entire ceramic studio and all supplies. My knowledge is limited. I’m a little “scared”. Your voice and demeanor calms me.
I’ll be learning so much from my subscription to your site. You are precious. ❤thank you.
You are most welcome! Here is a video on all you need to get started at home ua-cam.com/video/QAdchhoJ-QE/v-deo.html and a post to go with it potterycrafters.com/making-pottery-at-home/ This is a more advanced studio set up. ua-cam.com/video/qvsoGw7q7mM/v-deo.html Welcome to the wonderful world of crafting pottery 😊
Marie, you have kept me from just giving up on my wheel throwing I was ready to sell until I watched your video. I went today and bought the amaco clay #76 you recommended. It made all the difference in the world an the video showing how to center was great! Thank you so much
That is most Wonderful to hear. Thank you for taking the time to write me. I struggled so much with centering until one of my teachers showed me that way. I am so glad it help you you also. 😊
Thank you so much for this wonderful video! Selling pottery has become a main part of my business, and I have reached a point where I should probably get my own kiln instead of paying for it to get fired at a shop but I have been soooo anxious about learning about kilns. Your video makes it seem very achievable and I found your vibe so calm and relaxing and enjoyable to listen to. Thank you! 🥰❤️
That is great, Flynn. I remembered how nervous I was with my first KIln, and no one helped me out. After using my kiln the first time and talking to the techs at Skutt, I was no longer stressed about firing a kiln. I felt beginner kiln users would like to know this stuff. So I put together this video to answer all the questions I received from my viewers to put them at ease. So glad to help. Enjoy your new Kiln. If you have any questions feel free to ask.
Loved the tip about the cone 10 clay with heavy grog for the cookies. They will survive much longer. Since I hate making them and hate throwing them away, I shall definitely use a groggy clay in the future. Thanks!
Loved that you left the blooper in. Funny.
Thank you so much Ann. My friend and I get the cheapest cone 10 with the heaviest grog and the cookies last a long time. So happy to help. 💖
Oh my goodness, this video has answered numerous questions that I had on kiln purchasing/operation/safety.
Thank you!
So glad it was helpful! I was so afraid to fire my first kiln, it took me months before I did. Getting some important basic information helped a lot. Now it's nothing to fire up the kiln. 😍
Definitely getting a Kiln now knowing that it will increase the Sex. Thanks!
😀👍
This is a wonderful and helpful video! I was wondering if you can recommend a online store to purchase this kiln. It looks like local pottery stores do carry them but they are more expensive than online order, which one would you recommend?
Thank you! Here is the link to my kiln geni.us/GCrzBDK Hope it's cheaper then the local stores. Here is a link to my Kiln post also with other kilns to choose from. potterycrafters.com/buying-a-pottery-kiln/ 😊😊
@@PotteryCrafters Thank you and best wishes! love your channel
Thank you so much! ❤️
Love this video answered all my kiln questions as I am an older 3rd Art Teacher Student. I did burn up a table the kiln was on during test fire, I now have it on the blocks as suggested, thank you so much!
That's great! So glad I can help.
Thank you for being so straight forward and love your voice!!!
Thank you very much Kay 😍
Thank you! I’m getting a new kiln in a couple of weeks. Your information is very valuable.
Congratulations Peggy!!! How exciting. Glad it was helpful. When you're dealing with high temperatures these questions are valuable to new kiln owners. Enjoy your new Kiln. 😊
Jen Ken Kilns in Lakeland Florida has amazing large kilns starting at around $2400
Thanks. Jen Kilns are good also. 😊👍
She’s like the Bob Ross of pottery.
Thank you 😊
I like how you left you foible in. My mom would have said, "You got you tongue wrapped around your eye teeth, so you couldn't see what you were saying." Never could figure out if she was funny or just nuts. Either way she went with it so, we did too. Love your information and company while I work. My shop is too small and full for more than 1 actual person. My next shop is going to be a lot bigger. . . .with a bathroom! And a coffee pot. . . . . And a liquor cabinet with Bailey's in it. ~sigh~Someday~
That's funny. Thank you 😊 That sounds nice. Yes a bathroom would nice. it's still nice to have a shop. I would like my studio space to a little bigger also.
We have a brand new kiln and no experience. Neither the manual, videos or other videos we looked for have told us what the very first firing should be. 04, THANK YOU! I didn’t know if we should take it to it’s peak temperature, do it fast or slow or anything!!
Great question Linda😊 No you don't have to, just take it cone 04 test firing with a witness cone to make sure it fired to temperature on medium speed. This ensures your kiln is operating properly, burns off element oils, and develops an oxide coating that prolongs the life of your elements. Remember first fire is only kiln shelves and posts. After that, you can fire to your desired cone temperature. No need to fire to cone 10 if you don't need to. Glad to help. 😍
I know this is an old video, but I wanted to say that how your videos are informative and inspiring. I just started my journey to start my own business for a passion I had since I was a child
That is most wonderful to hear. Enjoy the journey 😍
Very good information! I purchased a 30 year old kiln and the fire brick floor had some areas of glaze drip. I am wondering if I should sand lightly and use kiln wash to protect from further damage. Thank you for sharing your knowledge
Thank you Sue 😊 Great question. No, you can not put kiln wash on the bricks. and yes you can remove the glaze on the bottom. The brick is soft so be careful 😊
I’m so happy I found your channel! I’m so interested in pottery and often will get ahead of myself with purchasing supplies. All of your videos have made the process so clear and exciting
Hi Ally. That is great!! Welcome to the wonderful world of crafting pottery. The things we can do with clay and glaze are endless. 😊
Thank you Marie. Very much appreciated. I love all of your videos.
You are so welcome Happy Potter. 😀 As I said before and it is worth repeating, I LOVE your name😍
Pottery Crafters thank you ❤️
You are so calm talking and sweet, thank you so much for the tips
Thank you 😊You're so welcome!
Very helpful information for someone considering getting a kiln.
This is a great starter kiln and more energy efficient. Here is link for you to check it out 😊 geni.us/GCrzBDK
Marie...Love all your videos. I have learned so much . The videos on loading your kiln was so helpful. ...Do you think you would be doing a video on the first firing after you get a brand new kiln. I think that type of video would be very helpful. Thanks
Thank you very much for the suggestion Pat. 😊
Thank you, that was helpful for general information. Now i need to find a manual or videos more specific to this kiln.
Glad it was helpful! Hope this helps with your new kiln😍 3fs7rd1xi6sy2zofjv3g0a0q-wpengine.netdna-ssl.com/wp-content/uploads/FX-INSTRUCTION-MANUAL-FOR-FX-KILNS.pdf
you have a very soothing aura ma'am
Thank you very much💖
Thank you, I would like to buy a kiln at some stage and your videos are helping me understand the process.
Glad to help. 😊I remember searching for the answers to simple questions I had before I bought my kiln. They were hard to find. We are all new at some time and we want to know basic things before we invest in a kiln. 😀
💖you have such a calming voice
Thank you so much 😍👍
Impressed you didn’t continue cracking up haha. I’m in Australia about to buy a skutt I’ve learnt so much from this one video. Didn’t have any clues what the 3 meant three inch haha
Thank you! It's good to hear that you're learned so much from the video! 💖
What a great and thorough video. I am looking at buying this exact kiln. Thanks for taking the time out to share your knowledge!
That's great. Here is link for you to check it out if you like geni.us/GCrzBDK The 3 inch brick is more energy efficient 👍
You said that the kiln must sit on a stand to prevent the floor overheating, but where can we buy tgese stands and what material are they made of that will be strong enough and non flamable metal or concrete? Are the stands dold with a new kiln? thanks. Your videos are excellent 👏 very informative and easy to follow
Thank you so much. Here is link to just one of many stands. geni.us/jZXJN I have one that rolls out so I can tuck it away when I'm not using it. 😊
Hi Marie, I’ve been watching your videos for a couple of months now. I just bought a brand new kiln and will fire my pieces tonight. I already did the test fire with the witness cone, and it worked well. After seeing your whole video (thank you, very informative) I still have one more question, what is your opinion on how full should you kiln be in order to fire properly? I know the load needs to be balanced so that the heat flows freely, and evenly inside, but how full should it be? Thank you!
Hi MammaRoub. That is GREAT. Congratulations on your first Kiln. For glaze firing. I'm not sure if you have seen this one but filled like this video is fine. Here is the link for you. ua-cam.com/video/LsZM6bUmKOc/v-deo.html As long you don't have pieces touching and good airflow. For bisque firing, you can have them touch but don't overstack your bone-dry pottery.
@@PotteryCrafters Thank you so much! What is your opinion on firing a kiln with just a few pieces? Let’s say I have jewelry and only small pieces, is it okay if not all the shelves are completely full as long as I make sure there is good air flow?
Oh yes, that is fine. My friend does it all the time.
Love your vidoes so much. They have been so helpful! Do I need to candle a glaze fire? Like crack the lid for an hour to let all the fumes out?
Thank you. No, you would not need to candle. Only if your greenware is not bone dry. You would initially crack the lid until the kiln hits 1000F because most of the fumes burn out between 500F and 1000F. Plus, the kiln can't keep up the temperature after that, so the lid should be closed. For more information. Here is an article that will help.
potterycrafters.com/is-it-recommended-that-a-pottery-kiln-be-vented/ 😊
The blooper 😂🤍 you are amazing!
Thank you Chan 😊
Should I do a test firing without any pottery in it for the first time I use my used (but new to me) kiln?
Thank you, Maire, for your wonderful videos!
very good question Stacey. Yes with a pyrometric or (witness) cone that you will be bisque firing to so you know if your kiln is accurate. thank you I'm glad they are helpful. 😍
simply the sweetest teacher!
Thank you so much Regina 😍
I have an older skutt kiln it is very large but in great shape has three sections , I was wondering if I could take one section off and run it with just the two sections that are left
That is a great question. I have never tried it but based on how the kiln is built, I would say no because of the control panel and the placement of the thermocouple. Although you could call Skutt and ask, they have a great tech service. 😊
Marie I want to say, thank you for the videos, they are really helpful; I am learning so much. I am new at this and i am trying to learn everything that I can before to start doing it. One question: are the pottery Microwave, freezer and Dishwasher safe?
Thank you! Very good questions. These Articles will answer the questions in more detail. Here are the links for you. potterycrafters.com/is-pottery-microwave-safe/ potterycrafters.com/can-pottery-go-in-the-dishwasher/ and this one you will find the question at the end. potterycrafters.com/can-pottery-clay-be-frozen/ Welcome to the wonder world of crating pottery! 👍😊
I have somehow acquired a free kiln in great condition and have a place to set it up, I was planning on doing handbuilding in my apartment and then going out to my dad shop to use the kiln. I have no experience and everything seems so overwhelming, I'm so nervous to try it for the first time. I wish there was a simple to read and follow instructions on how to use it, load it, bisque, fire and unload.
That is awesome! Congratulations on your first Kiln. Yes, it can seem overwhelming at first. That's normal. I remember when I got my first kiln. I was afraid to touch it for months. And now it's fun to fire. Take it one step at a time. The first thing you want to do is a bisque fire and make sure you have Pyrometric (witness) cones to make sure the kiln is firing to the right temperature. I do have a video on bisque firing that will help. Here is the link for you. ua-cam.com/video/LsZM6bUmKOc/v-deo.html After that, if you have any questions on the glaze firing, feel free to ask. Enjoy your new Kiln.
Thank you for your explanations. So informative and clear!
You're very welcome! Glad it was helpful.
Thank you very much for your rapid response and I’m taking advantage of your kindness asking you which kiln do you recommend for 110 or 115 current so I don’t have to install a 220 volts current outlet and again thank you for your attention
You're welcome 😊I would go with the Skutt KM-614, keep in mind it only fires to cone 6 and it is 11 inches across and 13 inches deep.
So informative and kind, thank you!
Thank you! You are very welcome. 👍
This is such an informative video Marie. Thank you so much.
You are most welcome. Glad it was helpful!
Hi! Thanks for making this video, super informative. I have an additional question. There are several kilns online that have a different maximum temperature. There are some that go to 1100 deg Celcius (2012 deg F) instead of 1260 deg C (2300 deg F). what are your thoughts on having a kiln with a lower max temperature?
Thank you, Joy; good question. At 1100 Celsius, you can only low fire up to Cone 02. While at 1260 Celsius, you can fire up to Cone 9. If you get the high fire kiln, you can fire Low, Mid, and High fire. So, a low fire kiln is fine if you only fire to Cone 06 or 04.
Thanks for the video...very informative
Ceramic tile installer since 1988
Looking forward to making my first piece in the near future..just subscribed 🙂
WOW, that's pretty cool, 32 years.😍 Welcome to pottery crafters. I hope you can get some cool decorating ideas and pick up some good tips on pottery crafting. There are so many things you can do with clay and glaze. 😊
Hello, I have an air inlet at the bottom of my nabertherm 45l kiln. On the program preset for bisque and glaze fire it says to close the air inlet for the last 20 minutes. Do you do this and recommend shutting the air inlet at the end of the program ? Thanks
Hi. Yes The Technician at Skutt also recommended this so you don't lose too much heat too fast at the shout down.
Thanks for all the useful information.
Loved the booper. Put a smile on my face. Ha ha.
Glad you enjoyed it! Thank you 😊
Another great tutorial. Thanks so much Marie for taking the time to share your knowledge.
Thank you Stu. Glad to help. 😊
Hi Marie, Thanks, as always, for such a useful and beneficial video! Because of your channel and website, and my own desires and needs as a potter, I am ordering a kiln just like yours today! Hooray! I am SO grateful for your excellent UA-cam channel and all your wonderful articles on your website! My kiln won't arrive until Nov, (Skutt is delayed due to Covid) but I want to be prepared for when it finally arrives. I have questions for you about witness cones and kiln shelves and posts. First, can you please tell me if you make your own witness cones, or do you prefer to purchase them? If you do purchase them, have you found it easiest to order the "self-supporting" cones, or if not, did you either order (or make) a witness cone holder? Next, if you prefer to order witness cones, do you order the "assortment pack" of 4, 5, and 6 cones, or what have you found is best to order? Also do you have a preferred store or online store to purchase witness cones? Phew. That's all my questions about witness cones. Next; have you found you needed to purchase additional kiln shelves and/or posts (other than what came with your kiln)? And if so, what additional kiln shelves or posts have you found you use "the most" and/or what additional shelves or posts do you recommend? And finally, I'd love to see a "how to load the kiln" video. I know you've said it can be like a jigsaw puzzle loading the kiln. Okie dokie, thanks again! Just like you, I plan to fire at Cone 5 and 6. I'll be brushing on Amaco Potters Choice glaze combinations, (love those colors and layering effects so much ~ especially those blues and greens) Have a great day!
That is so wonderful💖 Thank you very much Mary Jean,😍 I am really Happy for you. 😃You will love this Kiln and the technicians are so helpful. I have cone 5 and cone 04 witness cones that stand alone. I use them once in a while to make sure she is firing at the proper temp. My friend has an older kiln and uses three-cone sizes. she fires at cone 5 and will use a 4, 5, and 6 witness cone. You shouldn't have to do that with the new kiln. One cone will do. I bought my witness cones at the clay arts studio where I took classes. If I run across where you can get them I will let you know. I have not had to get more shelves. I use three on average. And the posts they provide are enough. I usually use the 4 and 5-inch posts. I was thinking of doing a loading video thanks for the suggestion. 😊
That's so awesome congratulations to you!!!
@@vickivanriel3082 Thank you, and thanks so Marie's wonderful videos and website, I purchased the perfect kiln for my needs and desires as a hobby potter. So grateful!
I greatly enjoyed your video!
I'm just starting my long desired hobby of pottery but did not have the time due to school & work. Still, I recently became motivated to change all that and do what makes me happy and I am glad to have subscribed, I will be keeping all these pointers in mind ! Thank you
That's great Alexis. Thank you for subscribing. Welcome to the wonderful world of crafting pottery 😍
Hi Marie, great instruction for a new kiln owner. I did a test firing. Cones indicated heatwork didn’t come up to temp, Cone 6. I’m going to run another test and keep the posts away from the pyrometer pegs. I’ll see how that works.
Also, you mentioned making cookies with cone 10 clay with grog for mid range firing. Do you kiln wash the cookies? The shelves?
Thank you so much for sharing.
LJ
Thank you, Linda 😊 I get cone 10 clay with grog because the cookies don't crack as easily and last longer. I was going to try kiln wash on my cookies but haven't yet. You can put kiln wash on shelves. I don't because my cookies work great, and I just don't want to deal with the maintenance of kiln wash. 😊
Are there any electric kilns that don’t require modification to your house’s electrics?
That is a good question. Yes, there are, but they are very small. This one fires to cone 6 here is the link for you to check it out geni.us/7HRpG 😊
You are the best Marie! Thank you for such helpful and detailed info. Much appreciated!
You are so welcome! Glad to help. 😊
I have four kilns I have bought over the years I have small kilns and one that was given to me it's about four feet tall and maybe twofeetin diameter. That's a lot for someone who just wants to make pottery.
WOW, That sure is. Which one do use the most?
Do you put kiln wash on the very bottom of your kiln on the bricks? Or just the shelves
That is a good question. The technician at Skutt told me not to because the bricks are soft and porous and affect the insulation. Plus, you don't have the ability to scrape the old kiln, wash it off, and replace it. The kiln wash will eventually flack off and float onto your pottery. If the glaze does get on the bottom, you can gently remove it and even use fire brick fix if you need to.
Thx for the info. I have a manual kiln and fired a bisque for 6.5 hours. The 05 bar bent and the kiln sitter shut down. Now many potters have told me that I should spent longer bisque firing ? I had it 2 hours on low , 2 on medium and the rest of the time on high. What do you think?
You're welcome. I fire medium to cone 04 with no problems. You can bisque fire medium or slow. Even a combination of both. But I would not recommend high firing. It's ok for glass firing, but clay does not like it. 😊
Thank you, Marie. Very informative video! Just a question: the temperatures you are mentioning, are they Fahrenheit or Celcius? Thank you 🙂
Glad it is helpful. Good question. they are Fahrenheit 😊
@@PotteryCrafters Thank you 🙂
Your videos are very helpful thank you. I just started making my own pottery. I just bought a brand new kiln and I have a question. I did 2 firings after the 2 firings the outside of the kiln lid started to have cracks I was wondering if that is normal?
Good question. Yes, cracks are normal because of how the brick expands and contracts. Keep an eye on it. If the cracks become bigger call the manufacturer. A little is normal A lot is not. 😊
Wonderful information delivered tastefully. Thank you so much.
You are most welcome. Glad it was helpful. 😊
I want to thank you for these videos. I just bought my first skutt and my greenware is almost dry enough to fire. I have embedded nichrome wire into the back of some tiles that I made. Can the nichrome wire touch the kiln shelf? Or should I make sure it does not? Thank you so much I appreciate you; any other tips about working with the wire would be appreciated. You make everything so clear!
Hi, Thank you very much. The Nichorme wire that I have says it can withstand temperatures up to1200 degrees Celsius to 2192 degrees Fahrenheit. That is right around cone 5 so if you fire below cone 5 should be fine. It shouldn't melt to the shelf. That sounds cool. Hope it turns out.😊
Thanks Marie and I loved the mistake, made me laugh, I do things like that all the time!!!🤣
Glad you enjoyed it! Thank you. 😊
great i watched before going in to purchase. will go throu other videos thanks a million
Glad it was helpful! Many potters new to using kilns have a lot of good questions. After all, they do heat up to over 2000 degrees. Some basic knowledge goes a long way. Enjoy your new kiln 😍 This post may be helpful also. Here is the link potterycrafters.com/buying-a-pottery-kiln/
Very informative video for all levels, thank you for sharing you knowledge and experience
So nice of you, Thank you Robert 😊
Good Day,
I ordered a brand new Caldera XL test kiln. When I opened the packaging to inspect the kiln, I noticed it have some incomplete sealant between the floor and wall bricks. In addition, I noticed the lid had a chipped about 1"x0.5" and another minor chip. There was also a heating element kind of off-seated. When the vendor got back to me, they were saying this is normal, to be expected, and most seasoned potters would find these things cosmetic and can be easily sealed/repaired.
However as a customer of various products (stained glass to clothes to food), I can't find their explanation logical. I actually do quality for work and if a supplier would have shipped a part in that condition, I would reject it and then write the supplier up dinging their ratings. Then it was starting to sound as if, they were going about to hint that I could do the minor sealant repairs.
This is starting to sound/smell fishy, I wanted to get your opinion and thoughts. Is this really normal? Or is this just the result of poor packaging? Or are they trying to pull a fast one because I'm a novice?
I greatly appreciate all and any advice you have.
Good Day, Jan. No this is not normal. If any potter buys a new kiln they want it in NEW condition. Even if it's cosmetic. That would be fine if it were a used kiln. But no potter should do repairs to a new kiln. (that's why we buy new) I hope they can resolve this for you and give you a kiln in new condition that you ordered. 😊
@@PotteryCrafters Thanks. So it sounds like they ARE trying to pull the wool over my eyes and don't want to replace it. I think they are trying to justify their mistake, by saying since I'm a novice potter that i don't know and that i have to be an experienced potter to appreciate the kiln.
But you are absolutely right, I bought a brand NEW kiln not USED kiln.
Yes, It's not your reasonability to fix a new kiln. Even if it got messed up during shipping. Fire brick is really soft and can chip very easily, but they should know that and pack the kiln properly. 😊
Great and informative video! I'm actually in the process of picking out a new kiln and I can't decide between the KMT-818 and the KMT-822. My concern for my area is that even though I have the space in my garage for this sized kiln, my garage tends to get hot and doesn't have much air flow. I do have a fan above to circulate the air but I worry living in Florida with the heat and the humidity, my kiln might shut off if it gets too hot. What would you recommend? Thanks!
Thank you Sandra😍 They are both good choices. I have the 818 with the 3inch brick. The 818 is 2.3 cubic feet and the 822 is 2.9. Those are both with the 3-inch brick. Because of the heat issue, I would strongly recommend the 3-inch brick, because the kiln will shout down if your control box goes over 160 degrees. I'm in the desert and never had it shout down. The 3-inch brick gives you more insulation in between, plus does not let out as much heat. you can check out the loading video ua-cam.com/video/LsZM6bUmKOc/v-deo.html to see if it is the right size for you. Plus check out potterycrafters.com/buying-a-pottery-kiln/ The 818 is in there. If you need a bit more room I would go with the 822. The apps are 33.4 and watts 8000 The 818 apps are 26.7 watts 6400 and costs me around $3 for bisque and $5 for cone 5 fire. Hope this helps. Happy glazing 😊
Hi I had a question! Can I keep the newspaper in when I fire? I used newspaper in the big kilns at my school, but I have a small kiln here at home and I don’t know if I can use it in my small electric kiln? Also loved the video it answered a lot of questions I had!
Thank you. That's a very good question. Yes, you can, but you don't want to use too much newspaper. You may get ashes from the newspaper in the kiln. But that's ok just vacuum out your kiln before you glaze fire so the ashes don't fly around and land on your glaze ware. Happy Glazing😍
Thank you for this information ☀️
You are so welcome! 😊
What do you use to vacuum? Just a normal house vacuum? How many pounds of greenware can you fit in the 818-3? Thanks!
Yes. A use a separate vacuum cleaner I keep the garage. I am not sure how many pounds or pieces I bisque fire. It can very. I can fit around 13 to 18 pieces for glaze firing, depending on sizes of the pottery. 😊
Hello Marie thank you so much for your video! just a question, would you recommend me to buy same model as your kiln, for stoneware pieces?
Yes, absolutely I love this Kiln. I would Definitely go with the 3 inch brick. Your kiln cools down slower, the outside of your kiln does not get as hot, and is more energy efficient. Here is the link if you want to check it out geni.us/GCrzBDK
Wonderful video! I've just bought a pretty old duncan teacher kiln and am in the process of hooking it all up (I loved how the first question was about the electrics which is exactly what I'm doing now!) anyway, quick question if you don't mind -
Is it OK to put round shelves in even though the kiln is octagonal? I'm having difficulty sourcing octagonal shelves.
Bonus question -
The only shelf I have is the bottom one which was cracked in half, I've repaired it with fire cement and it fits together well, am I OK to place some pottery on that and fire or should I never fire on that shelf at all? (lastly, underneath thst shelf which was cracked is the very bottom of the kiln which had a matching crack, it seems to be some sort of flakey asbestos type material (I know it's not asbestos though!) is this a concern? It's not made a hole or anything.
Thanks in advance
John
Congratulations John😍 Those are good questions.
Yes, you can use round shelves as long as you have a clearance of about 1 inch around between your selves and the sides.
You can use the bottom shelves, but I would suggest putting extra support posts on each side of the cracks. Also, check out my loading video for placements of your support posts.
The flaky material sounds like Kiln wash. I am 98% sure it is. That's why I don't use it. I use kiln cookies. ua-cam.com/video/FNzQiAsUQsc/v-deo.html
Happy glazing. Enjoy your Kiln 😍
@@PotteryCrafters great stuff, thanks for the answer. The flakey stuff isn't kiln wash though. I actually just watched your kiln loading video (very good) and the difference between your kiln and mine is that in your kiln the very bottom doesn't come out whereas mine is actually a removable shelf, so when you lift it out you see the foam/insulation, and it's this that's actually cracked. I'm sure though that once the shelf goes back over it, it will be fine as it will be protected. Thanks for your reply.
Glad I could help. WOW, that's an older kiln. 😃 Do you have brick on the bottom? Make sure there is airflow between the bottom of your kiln and your shelf.
also, make sure you vacuum that stuff out before firing 😍
Happy glazing
Thanks a lot for sharing,...I want to get my girlfriend all the equipment needed for potterying and experimenting. Super good vid, very helpful!!!!
That is Awesome Jose'. 😍 So glad I could help. Thank you so much for sharing. Very happy for her. 😊
If you need help with choosing supplies you can go to my website potterycrafters.com and potterycrafters.com/recommended-tools/ also potterycrafters.com/buying-a-pottery-kiln/ if you are looking for a kiln or potterycrafters.com/pottery-wheels-reviewed/ Pottery wheels 😍
Great video! I'm a complete newbie and soaking up all I can before purchasing my first kiln. If you have time to answer a question I'd appreciate it. I'm not going to start off making pottery items but clay tiles - I won't be doing a bisque fire - I'll start with a cone 5 glaze, followed by an 04 for the details - how often would I vacuum out the kiln? At the same rate? Thanks so much!
Thank you Kelly. Welcome to the wonderful world of crafting pottery. In that case, I would vacuum around every 8th fire or so. Keeping the elements clean extends the life of your elements. Plus, you still get dust from the fire brick in your kiln. If you have any more questions, feel free to ask. Here is the link to my videos. www.youtube.com/@PotteryCrafters/videos I have over 100 for you to choose from. Plus, my potterycrafters.com website will help. Enjoy the journey. 😊
love you videos, my kiln controller is confusing the hell out of me. I have to put the minutes in for the rate of change and its doing my head in :(
Thank you Rob. 😍 So true. That's why I got the touch screen controler. What type of kiln do you have?
Hi Marie. I find your videos very helpful and enjoyable. I just installed a small kiln in my home studio and although I've been a potter for a few years I'm new to working a kiln. I've only just done a bisque firing and I'm looking forward to glazing .When it comes to glaze firing I don't understand anything about holding time and why I would need to do that. Can't I just follow the prompts for cone 5 or 6 firing with no hold time at the beginning or at the end? What's the purpose of holding? Have you done a video about that? If it matters I have an L&L E18s with a genesis controller. Thank you for such great videos.
Thank you Carmela 😊 Because many controllers are a little different it's hard to give a proper example. Holding allows your glaze to cure giving you less chance of pinholes. For your controller, this is hold time - Press ENTER. HOLD and 0.00 will flash. Enter a hold time or leave at 0.00. Numbers to the left of the decimal are hours, to the right are minutes. If you don't want to hold slow fire is the next best thing. It's not all about temperature. it's also about time. Rush a glaze fire ruin a glaze fire. it's so exciting to glaze fire for the first time. Happy glazing 😍
Can cones be reused?
Help…! I was using cone 6 and my kiln turned off after the 3rd hour during the firing process. The kiln has cool down now, and I would like to know if I need to replace the cones before I restart the kiln again or should I use the same cones that are in my kiln right now?
Great question. The cones are made melt to the desired temperature so they should be fine. If you just want a peace of mind you can change them 😊
@@PotteryCrafters Thank you so much.
Thank you for the great video. Where can I find the link for your article on choosing a kiln?
Thank you very much. Here is the link for you. potterycrafters.com/choosing-an-electric-kiln-a-step-by-step-buyers-guide/
Thanks! Very gentle and information!
Glad it was helpful! 😊
Hi the video was very useful but my kiln just has a number scroll for temperatures so I have a couple of questions how do I know what temperature to put it on and will it be different for each piece of pottery I make and how long will a piece of pottery take to Kim since I can’t seem to find anywhere where it says it is done since it seems a very manual kiln
Good question Will, This chart should help. 😊 It gives the temperature you should fire to according to the cone size on your clay and glazes. www.skutt.com/pdf/op_manual/2009_op_manual/KM_Manual-09_Appendix3.pg44.pdf
Hi, this was great to watch. It answered a lot of questions that I had about my kiln. Thank you 🙂
You are so welcome Carolyn! That's great 😊
Hello! Thanks for tis great, informative and generous video. I would like to ask you a question: I have a new kiln and I've done two firings. When I enamel fired, I noticed that the pieces move inside the kiln and they end up in a different position from where I first placed them. These pieces are little human figures of about 12cm high that I lie on metal spikes so that they don't stick to the shelves. Do you know what the reason for this moving around may be? Has this ever happened to you? Any tips? Thanks!!!
Hi Augusto. Thank you I'm glad it helped. It sounds like little human figures were walking around in the kiln. 😅 Just Kidding 😀 That is funny that they have moved. No I have never heard of that. I will ask my fellow potters and get back to you. That is pretty interesting. Enjoy your new Kiln.
@@PotteryCrafters Hi! Thanks so much for your reply!!
Love your shirt and the Bob Ross vibes you give off.
Thank you so much Kristine. 😍
Thank you so much for this! I’m buying a new kiln and I’m a little terrified. What size is this one?
Thank you. So glad it helped. I made the video because I too felt that way when I got my first kiln. And I know other potters that felt the same way. I have the Skutt 818 -3 The 3 inch brick makes it more energy efficient and it's
16-1/2" wide and 18" Deep. Fits 10 to 15 pieces depending on the size of your pottery. Plus it fires to cone 10 which means when you mid or low fire, your elements will last longer. Here is a link for you to check it out geni.us/GCrzBDK 👍
@@PotteryCrafters Thank you! So helpful!
Hi there when firing with a half shelve my cone did not go to cone 6.
Hi Denise, You can try putting a 10-minute hold on at the end. This allows the kiln to reach the even temperature throughout the Kiln. Holding more than 20 minutes will raise the cone size to cone 7. 😊
Amazingly informative video, thank you so much!
Thank you 😍 Glad it was helpful!
Marie - I want to buy an electric kiln here in Europe but I would have to position it outside. It is humid where I live (island life 🌴). Is this advisable or absolutely not doable? I could build a cover/enclosure. Thanks for any help!! I’ve been really enjoying your videos 🙏🙏🙏
Thank you 😊 Yes, you should be able to as long as you build a cover so your kiln does not get wet. My friend has a kiln outside under a cover so it does not get rained on 😊
Can I fire (in the same kiln load) a low fire 06 clay with a low fire 06 glaze along with mid fire (cone 6) greenware pieces that fire (to become bisque) at 06?
That is a very good question. Yes you can. This post will help. here is the link for you. potterycrafters.com/bisque-and-glaze-fire-pottery-at-the-same-time/ It is the last question in the post. 🙂
Thank you so much for this video!! I feel like I have such a knowledge gap when it comes to kilns 😅❤
You're so welcome! In school they would not let us near the kilns. They didn't even give us a kiln 101 course. I was afraid of them for a while. I'm glad it helped. 💖
@@PotteryCrafters same here, college (I was in the art department but not a ceramic major), the studio I know go to, and the pottery supply store all have the employees work the kilns. Which totally makes since, I just need to learn more if I eventually what to get my own kiln ❤️
Where are the links you recommended? We are opening a pottery store and would love to read more of your stuff
Hi Jesse, I do not have a store set up yet. Thank you for asking. On a mobile phone, hit the title under the video. Then hit the SHOW MORE SECTION. and on the computer, hit Show More. You can also check out my website. Here is the link for you
potterycrafters.com/ and this section with over 100 videos for you to choose from. ua-cam.com/users/PotteryCraftersvideos 😊
Hi Marie. I have a couple of questions for you if you could be so kind as to take a minute out of your time to answer. I am getting ready to fire up my Skutt KMT 818 for the first time (waiting for my pyrometric cones to arrive) and I've read a couple of conflicting things about putting kiln wash on the bottom of your kiln. Some sites say to do it but others say to put kiln wash only on the shelves.
1.) Do you recommend kiln washing the bottom of your kiln floor to protect it?
2.) Should I bisque fire my new shelves in an empty kiln once before I apply the kiln wash?
Thanks so much.
Congratulations on your new kiln! Those are very good questions.😊 No, you should never put Kiln wash on your bricks, because Kiln wash does not last forever. The kiln wash will seep into the soft brick and there is no way to scrape it off and replace it. After a while, it will flack off the brick and land on your pottery. I have a video on protecting your kiln selves that may be helpful ua-cam.com/video/ss-kqVRXhl8/v-deo.html
You have to be careful with some pottery sites, as I have also come across some misinformation.
You want to fire to cone 04 with just the shelves and posts and no kiln wash on your shelves. This extends the life of your elements and using pyrometric cones makes sure your kiln is firing to the proper temperature. Enjoy your new KIln 😍
@@PotteryCrafters Thanks so much. Most of the info I had read or seen already said not to add kiln wash on the walls and floor, but my boyfriend said he read it should be applied to the floor. So I started researching it and found conflicting recommendations. My reasoning to him was exactly what you just said about it flaking off and not being able to scrape it.
I had watched this video twice to see if I could find my answer and saw your latest video about protecting kiln shelves a couple of days ago. After I left my question yesterday I went back and watched it again and got my answer. I really appreciate you taking the time to answer and I appreciate all the work you put into your craft and educating us newbies & novices.
Could you maybe do a more in depth tutorial on pyrometric cones and how to use them in a kiln? I know it's probably not the most interesting of topics when it comes to pottery, but it's very important we all understand how our kilns are firing & running.
Thanks again!
You are so welcome, glad to help 😊Thank you so much for the suggestion. You are right there are parts of pottery that don't seem that interesting but are very important to our success rate. I was actually thinking I should do a witness cone video.
What would be a good size and brand of a kiln for a home potter .
Hi Shawn. I really love my Skutt Kiln. The 3 inch brick makes it more energy efficient and it's small enough that you don't have to make a lot before you fire. Around 10 to 15 pieces depending on the size of your pottery. Plus it fires to cone 10 which means when you mid or low fire your elements will last longer. Here is a link for you to check it out geni.us/GCrzBDK 👍
@@PotteryCrafters thank you so much for you response :) Merry Christmas 🎄
You're welcome Shawn. Merry Christmas 😊
Super helpful video, thanks so much!
Thank you 😊 Glad it was helpful!
Watching this video was really insightful . If I am able to get my own someday I know that I will refer back to this video for sure 💜
That is great 💖Hope you can have your own Kiln some day. Thank you.
Hi Marie, I'm applying for a grant and figuring in the cost of buying a brand new Skutt kiln. What is your opinion on
APM elements? Are they worth the upgrade? I love your videos!
Thank you, Cassy. That is great! Think of how high and how often you will be firing. I would recommend the APM elements if you are firing to Cone 10 and holding at high temperatures. Enjoy your new Kiln. 😊
Is it bad to stand your kiln shelves upright on a concrete floor?
I also had a crack on one of my shelves and cut it in half (with a concrete saw) is that ok? I was very worried that it would split and ruin everything
Well that was a great way to salvage your shelf. 👍 Actually Kiln shelves can warp and crack after a while because of the intense heat of the kiln.
Hi Marie,
Thanks for this great video. I just recently got an 822 and am learning about firing. Do you prop your lid until the kiln reaches a certain temp (1000 Degrees F) then close it for rest of the firing? I’ve read many articles that say you should do this if you don’t have a downdraft vent. I have an overhead vent only. Thank you!
You're welcome. Yes I prop the lid until 1000 and open the top peep throughout the firing 😊 This allows the fumes to escape and not settle back on your pottery or your elements 😍 Enjoy your new KIln
@@PotteryCrafters
Thank you so much, nice to know I’m on the right path. Really appreciate your prompt reply! 😁
The time we take to create pottery. we want to make sure we are doing the right thing. So glad I can help.
Hi Marie, what size is your kiln, wideth, depth and cubic foot space? Are you a production potter? Thank you.
Hi Linda. No I don't have the space to be a production potter. This is just the perfect size for me. So I can make larger taller pieces and don't have to make a lot before I fire. It's 16-1/2" a cross and 18" Deep Here is the link for you to check it out geni.us/GCrzBDK