I had to replace the coil packs and spark plugs on my daughters Infiniti G37 I bought her and until I found this video you made; I felt a lot of stress about getting in to it. After watching your excellent tutorial, I had it done in less than an hour! You made my job less stressful and so much easier. I did use an 18" extension for the 10mm socket and 14mm spark plug socket which made it easier to loosen/replace the coil pack fasteners & spark plugs and get around those pesky throttle body hoses😒, again you're a life saver! 🙂Keep up the great work! 👍
This is the first video where I can actually see what’s going on - thank you for filming in the light! I didn’t hear you mention anything about the ignition coil boot, is that not a component of changing your spark plugs and coils? (I know you didn’t swap the coils here but assume you could’ve popped in new ones just as easy?)
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
Thanks, this will help me out tomorrow. Very thorough. I'm a bit stumped, car cranks for like 5-10 seconds before starting. Threw a code for vacuum, found crack in hose by throttle body, fixed that, reset the light, still have the starting issue but no light. Kinda left guessing...
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
Місяць тому
YEOW Jules man, U R the BEST bro. Thnx. a mill. for this video. I am not mechanic but YOU explain this so clearly, I going to do my plugs change my self. I have a 2009 fx35 with over 200 thou. And I luv this suv. I live in the ORLANDO area, dont kknow where U are? but if U were close or even in a close state I would bring you my suv to work on it for me. In my area I can not find a good mechanic. Still looking thou. Thnx a lot again.
What was the reason you replaced your spark plugs? Routine maintenance? I’m asking cause I’m doing mine now and was due to rough idle which I’m not sure if it was misfiring. Old Plugs looked similar to the ones you took out. I’ll start it tomorrow.
goodmorning Mr, i would like to have you helpe. i have a 2003 nissan skyline gtm- gh-v35, vq25dd car bought in nagoya japan. is it possible to replace this engine with another vq35l v6 or q40 with vq25dd gearbox?
Great videos. I gave a 2011 g37xs sedan. The rear defroster is very weak and only and barely clears the bottom half. Ant ideas as to what it could be? Thanks.
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
So when I start the car, it idle low and sometimes dies, fine when you’re driving and have gas. At idle or when going into reverse with no gas, it sometimes dies. What you think? Spark?
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
Ever since I've gotten a new alternator installed brand new my idle has been to low . giving me vibrations in the engine. At stio lights but shakes until about 30 minutes of driving then no shake. Its annoying. I changed the fuel injectors today . still idling low . maybe its my fuel pump but that runs Smith from what I'm hearing. Plus the car starts to no problem.cleanedaf sensors. Cleaned throttles still low rpm .
I need help asap bro. I replaced the spark plugs with oem ones from z1 and cleaned the throttle bodies now everytime I start my car it auto revs to 1500/2500 rpm I need HELPPO
No, you don't need to remove the fuel damper. Just the pcv hose. The coil will wiggle out just fine. As for the idle relearn, there's an app that does it for you. No need to count, or hold accelerator.
So wait i know u answered it but to clarify if I disconnect the negative terminal I don’t have to mess wit this bs it’s so confusing for me cause my car is an 08 and doesn’t beep when pressing the start button
@@shomarinelson7779 lol yeah that did work for a little I guess i really have a transmission problem that’s causing the light and as I drove more the light just went off by itself again then but when I put the car in reverse it takes a while to actually shift in to the gear.
when i replaced my spark plugs and coils, the car will start but wont rev/drive/accelerate. i haven't done the throttlebody relearn procedure, I accidentally took off the left electrical plug on my throttle body. will the relearn procedure fix it?
You didn’t do relearn correct also I think the relearn he showed is shorter than the actual version. In the actual version you have to press the pedal down 5 times after light starts blinking
I had to replace the coil packs and spark plugs on my daughters Infiniti G37 I bought her and until I found this video you made; I felt a lot of stress about getting in to it. After watching your excellent tutorial, I had it done in less than an hour! You made my job less stressful and so much easier. I did use an 18" extension for the 10mm socket and 14mm spark plug socket which made it easier to loosen/replace the coil pack fasteners & spark plugs and get around those pesky throttle body hoses😒, again you're a life saver! 🙂Keep up the great work! 👍
This guys videos not being over 20mill views is crazy! Always the informative helpful videos that dont blow up…. Youre a life saver gang 💯🔥🔥
I love how thorough you are and you have a steady hand to be able to view without getting dizzy from watching your instruction. Thank you so much Sir.
Thank you for that my man's! Easy simple but so thorough keep up the hard work bro
He explained it well and I did it while watching nice work. Learning
Well done my friend, you're the man I need it to fix my infinity. Simple and well explained. ❤
I’m 4 minutes into it and I must complement you on speaking well thank u
You saved my car! Thank you!
Awesome Bro,...keep posting juicy videos man,...thumbs up 👍👍👍
Thanks for the vid! Super helpful
Yoo u blessed I’m sitting here for hours cold asl tryna figure out how to relearn the idle glookssss frrrrrr
Thanks man really easy step by steps 💯💯🤙
Wow, that’s way easier than I thought
Excellent video young man!! Keep em coming…. New subscriber
Very helpful thank you brother keep it going 💯
This is the first video where I can actually see what’s going on - thank you for filming in the light! I didn’t hear you mention anything about the ignition coil boot, is that not a component of changing your spark plugs and coils? (I know you didn’t swap the coils here but assume you could’ve popped in new ones just as easy?)
Nice. Where did you order the spark plugs? I have a 2013 Infiniti m37x
Torque specs for the throttle body and spark plugs?
Your content is awesome. Keep making more diy videos..
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
Appreciate this video gzzz
Thanks, this will help me out tomorrow. Very thorough. I'm a bit stumped, car cranks for like 5-10 seconds before starting. Threw a code for vacuum, found crack in hose by throttle body, fixed that, reset the light, still have the starting issue but no light. Kinda left guessing...
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
YEOW Jules man, U R the BEST bro. Thnx. a mill. for this video. I am not mechanic but YOU explain this so clearly, I going to do my plugs change my self. I have a 2009 fx35 with over 200 thou. And I luv this suv. I live in the ORLANDO area, dont kknow where U are? but if U were close or even in a close state I would bring you my suv to work on it for me. In my area I can not find a good mechanic. Still looking thou. Thnx a lot again.
What was the reason you replaced your spark plugs? Routine maintenance?
I’m asking cause I’m doing mine now and was due to rough idle which I’m not sure if it was misfiring. Old Plugs looked similar to the ones you took out. I’ll start it tomorrow.
Does this work on the 2014 q50 3.7?
That definitely help me out 💪
You're a genius 😎
Does this idle relearn work for the fx35 as well?
Can you send the link for the spark plugs? I have a 2013 G37X
Respect brother
Had to like and subscribe
Does it also work for 2011 m37X?
Is there a certain order to put them in
I broke one of the bolt when I was putting back the ignition coil lol
Never knew about the idle relearn wow
Thank you 🙏🏼
Why was your driver side throttle body converted in old and osssenger side is clean. Did you clean it out first
Great info
goodmorning Mr, i would like to have you helpe. i have a 2003 nissan skyline gtm- gh-v35, vq25dd car bought in nagoya japan. is it possible to replace this engine with another vq35l v6 or q40 with vq25dd gearbox?
I would imagine you need a new computer and possibly new wiring harness
My g is shaking and no check engine no power u think it’s galllery??
You can also take out the spark plugs with the same coil if you don't have a magnet ❤
i have a 08 G35 and i replaced the spark plugs and coils but cylinder 4 is still misfiring
Where can I find the throttle body island bolts from ? Mines are ruined
Dealer
When you removed your old spark plugs, wasn't that oil on them? And if so was your only replacement just a valve cover gasket and a tube seal?
If the spark plug flooded with oil chanhe the whole valve cover
i think i will replace the valve cover, plugs and coil packs at the same time.
I feel like I'm doing the idle reset exactly how you explain, but my check engine light never blinks..
Great videos. I gave a 2011 g37xs sedan. The rear defroster is very weak and only and barely clears the bottom half. Ant ideas as to what it could be? Thanks.
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
I thought this was much harder How long would it take an average weekend works on his own car mechanic to do it?
Having problems with my g37s autozone told me mass airflow sensors and throttle body sensor.
theyre cheap sensors that connect to your cold air intake i believe
So when I start the car, it idle low and sometimes dies, fine when you’re driving and have gas. At idle or when going into reverse with no gas, it sometimes dies. What you think? Spark?
Don't use brake cleaner on the throttle bodies. Brake cleaner will deteriorate the rubber gaskets and can affect the electronics. Use throttle body cleaner or maf sensor cleaner/ electrical contact cleaner
Good video. I hear every 120k it's good to change the coil packs $100 X 6 =🤑
The OEM ones are much more expensive ($100 each!). As long as they don't have any issues, changing them is unnecessary.
Ever since I've gotten a new alternator installed brand new my idle has been to low . giving me vibrations in the engine. At stio lights but shakes until about 30 minutes of driving then no shake. Its annoying. I changed the fuel injectors today . still idling low . maybe its my fuel pump but that runs Smith from what I'm hearing. Plus the car starts to no problem.cleanedaf sensors. Cleaned throttles still low rpm .
Do you have a check engine light? What code?
I need help asap bro. I replaced the spark plugs with oem ones from z1 and cleaned the throttle bodies now everytime I start my car it auto revs to 1500/2500 rpm I need HELPPO
Idle relearn bro.
Yes, better to set them in carefully
Do you have to do idle relearn after replacing spark plugs?
Nope
No, you don't need to remove the fuel damper. Just the pcv hose. The coil will wiggle out just fine. As for the idle relearn, there's an app that does it for you. No need to count, or hold accelerator.
Good job
@@JulesMechanics is there anyway I can contact you.. I need help with HR swap into 05 se-r Altima, automatic 5 speed. I live in NY/NJ for convenience.
whats the app then
@@odhdi It's NDS3 lite app. It only works with android and you'll need a obd blue tooth adapter. It's similar to the Torque app.
You’re right I did just that. Thanks for the tip
Do you have to do the throttle relearn if you remove the battery ?
No
Thanks brotha
So wait i know u answered it but to clarify if I disconnect the negative terminal I don’t have to mess wit this bs it’s so confusing for me cause my car is an 08 and doesn’t beep when pressing the start button
It’s low key easier to remove the whole intake as one, throttle bodies and all. You get a lot more room to work with
The only criticism I have is don’t ever drop a spark plug in there you’ll Dee gap them at least that’s how I feel.
That’s a myth it would be very hard to do that just saying
Do this work with q50?
Yes 3.7
How safe is it to drive when you need coil and spark plugs .
Going to be misfring like crazy
@@JulesMechanics I’ll forget that idea
Why isn’t mine flashing 😩😩 .. is there any special steps I been trying this and the method where they press it 5 times hard and nothing works.
Disconnect the negative for five minutes . then plug it back and try the process again.
@@shomarinelson7779 lol yeah that did work for a little I guess i really have a transmission problem that’s causing the light and as I drove more the light just went off by itself again then but when I put the car in reverse it takes a while to actually shift in to the gear.
@@ryanshivram9496 wait so your saying after you changed your spark plugs this problem happened?
@@angelgomez531 yeah but the problem wasn’t related to that I didn’t disconnect the battery before doing so and my transmission is starting to go also
My car has been shaking a bit out of no where never had an issue a leak nothing what will be the reason for this ?
Did you ever figure it out bro my does the same
Mine did that, there was a crack in the hose at the throttle body.
when i replaced my spark plugs and coils, the car will start but wont rev/drive/accelerate. i haven't done the throttlebody relearn procedure, I accidentally took off the left electrical plug on my throttle body. will the relearn procedure fix it?
Erase the code and do the relearn
@@JulesMechanics thank you, for that, what's the procedure on the racing the code?
@@JulesMechanics erasing* also that's awesome that you replied as fast as you did
@@joshpayton1629 if u dont have a scanner disconnect the battery for couple minutes
@@JulesMechanics you're awesome bro, i do have a scanner that im letting a buddy borrow, ill do both just incase!
Did me a solid bro
Always replace the ignition coils as well otherwise you will be semi-repeating this process when one of them fails.
My car smoking and it’ said service engine soon
I did everything and now my car auto revs without me touching accelerator
You didn’t do relearn correct also I think the relearn he showed is shorter than the actual version. In the actual version you have to press the pedal down 5 times after light starts blinking
My mechanic quoted me $600 for a spark plug change on this car.😢
Nah I know it smells like mad gas 😂😂😂😂