Technics SA-TX50 / SH-AC500 / SH-GE70 Sound System
Вставка
- Опубліковано 25 лис 2020
- My Technics System at Home
Technics SA-TX50 DTS Receiver
Technics SH-AC500 Dolby Digital / DTS Decoder
Technics SH-GE70 Graphic Equalizer
Controlled by Logitech Harmony Elite - Наука та технологія
Ready for some new bulbs sir
Sweet setup 😍
Dems full range towers, or a Sat/sub combo? Or is it towers & a sub? Finally ordered me an SH AC500D for a set of powered 5.1 speakers, allowing me integration to my 2ch HiFi setup w/o taking much space. Opted for the technics over a budget amazon box type unit in hopes of some better control & quality.
I have some Bookshelf Speakers from Nubert. They Sound pretty good. If I would listen some Music on my Couch only, then there is no need for Sub-Support. But because my Living-Room is a bit bigger and I like to hear some Music when I sit on the Table, I go with Sub-Support for better Bass in some Areas in the Living Room.
@@tlc-2324 Most of the range still came through my system, a testament that bookies can def suffice! Id wanna try a nice horn speaker on that power amp personally, I bet it sounds like it puts out more power than its rating
What this sound processor does ?
Hello. can you show how you got it all connected together? greetings
What are you interested about? Connecting the SA-TX50 with the SH-AC500 and SH-GE70 for Stereo Application only? That is a simple thing.
In my case I connected the devices, that the sound loops to in the Equalizer in Stereo Mode. But it this loop is non activated if Surround Mode is on. Connecting like this is complicated a little. You need a Cinch Switch for the Loop, and a remote Power-Socket for the Equalizer, because this device is not remote controllable.
If you are interested, I can send you a Mail how everything is switched.
If you don’t have or don’t want a Harmony Elite, I would not recommend to install a Setup like this. There would be 4 Remotes necessary that everything works as it should. Switch on the Receiver and choose VDP Mode, Switch on Decoder and choose Stereo Mode, Switch on Equalizer, activate Cinch Loop to Equalizer.
@@thomaslanz1735 I am interested in connecting the sa-tx 50 with the sc-ac300 and sh-ge90 so that the stereo signal goes through the sound processor and if it is possible to transmit the surround signal also through the sound processor, I would also like to know how to do it. I can ask for photos of how it is connected with RCA cables, send me an e-mail to marcinpolczewski@wp.pl. greetings
Did you change sh-ac500' dark panel around screen to the sh-ac300?
Exactly :-)
Name song
Distribution of Hope - B.D.KOLD