Tama STAR Walnut in Vintage Sea Blue

STAR is the flagship line for TAMA drums. It takes the knowledge and research we cultivated for the Starclassic series to the next level, by reexamining every detail to enhance shell resonance. Walnut has long been favoured by furniture makers for both its beauty and durability. As a drum shell material, Walnut’s naturally EQ’ed tone has been praised by the drum community for both the stage and the studio. The STAR Walnut shells project booming low end with enough cut to be heard through any mix.
This Kit Includes:
10″ x 7″ Tom
12″ x 8″ Tom
16″ x 16″ Floor Tom
22″ x 16″ Bass Drum
Tom arms/clamps not included
Hardware, Cymbals & Snare Drum not included
Bearing Edges:
Vibration produced by hitting a drum transfers to the shell through the contact point between the drumhead and the shell. Therefore, the shape of the bearing edges is one of the most important factors in a drum’s sound.
STAR drums feature a bearing edge shape as shown in the diagram. Its peak is rounder than TAMA’s traditional bearing edge. This rounded peak provides more contact between the drumhead and shell, allowing vibration to travel from the drumhead to the shell more efficiently. Also, the peak position of the edge is 3.5mm from the shell’s outer surface, which further improves contact between the drumhead and drum
Die-Cast Hoops:
Hoops are a crucial element to a drum’s sound and ease of tuning. STAR drums feature die-cast zinc hoops, which are manufactured by injecting molten metal into molds. Die-cast hoops are denser and more consistent in shape than triple-flanged hoops, which are manufactured by bending metal plates. Sonically, die-cast hoops provide crisper attack, greater projection and a more focused and powerful tone. Die-cast hoops also make tuning easier and keep drums in tune longer because of their density and consistency in shape. These hoops combine with the rich, resonant STAR drum shells for a very well-balanced, full-bodied sound.
Hold Tight™ Washers:
Hold Tight washers are designed to prevent the tension rods from loosening. They consist of a cup-shaped stainless steel washer which contains a rubber ring.
Vibration caused from striking a drum creates space between tension rods and hoops, which can cause the tension rods to loosen over time. The rubber rings on our Hold Tight washers help absorb the impact of vibration and keeps tension rods in constant contact with the hoops to prevent loosening.
Super Resonant Mounting System:
To maximize the natural resonance of drums, tom toms should be mounted with minimal stress and strain on the shells and hoops. STAR drums feature our brand new mounting concept to achieve this goal, called the Super Resonant Mounting System.
Minimum Shell Contact:
Every piece of hardware that is attached to shells affects the resonance and sound of the drums. In developing the STAR drum line, every detail was carefully considered to maximize resonance and optimize sound.
Walnut Shells (STAR Drum):
Generation of furniture makers have favored Walnut for its reliable solidness and long-term stability. As a drum shell material, Walnut’s distinctive warm, fat sound has long been subject of rumor among drum tone aficionados, and new STAR WALNUT are doubtlessly about to rekindle that discussion.
Floor Tom Legs:
In general, floor toms are positioned vertically and are struck with downward force. This means that the floor tom legs receive this downward impact directly. The tips of STAR floor tom legs feature a special, hollow, soft rubber construction which help absorb this impact in a way that emphasizes the drum’s natural resonance and sustain.
Quick-Lock Tom Brackets:
The new “Quick-Lock” tom brackets equipped on the Star-Cast Mounting System and on Starclassic floor toms have some very distinctive, ground-breaking features.
First and foremost, as their name suggests, these brackets allow for quick and easy setup and breakdown. But the real unique feature of these brackets is that once the drum is positioned on a tom stand or floor tom legs, there is no need to attach and adjust separate memory locks to save the setting. By simply sliding the switch on the tom bracket, the bracket separates into two parts. When the drum is removed for breakdown, the “memory lock” portion remains on the tom stand or floor tom leg. This saves your positioning and makes the next set up quick and easy.
Bass Drum Spurs:
The bass drum spurs adopt the same concept as the floor tom legs. Since the bass drum spurs receive the horizontal impact from the pedal striking the bass drum, properly absorbing this impact is critical to the natural resonance of the bass drum shell and for a comfortable feel from the bass drum pedal. This is why we designed STAR bass drum spurs with soft, high-mass rubber feet.
Heads used in demo: Evans G2 Clear (tops) with G1 Clear (bottoms)
Snare: Tama Starphonic Aluminium.
Demo: Brett Sawmy.

[@drummerboyharm3078]

From own experience. Fronthead bass with this drums is not a lucky combo... And I prefer Starclassic over Star... 😊

[@stevenfederico2594]

Not worth the money

[@MrGuitarandvocals]

DW drums are definitely not worth the money