I am in the same situation as you. I have a 130 on my work bench. The Dial a Stitch is stuck. The needle moves up and down, but not sideways. I tried to replace its motor with a 1.5amp Accusew motor I bought on eBay but have yet to do it as a final step after cleaning the rest of the mechanisms. There is a hex rod under the machine which is cracked and I need that replaced first. The dial for the feed dogs is rotating, but it doesn't engage the feed dogs to move. I am overwhelmed. Any tips? Do you have an email to contact you so I can get some tips directly? Thanks, man. Keep up the videos. I wish they were step-by-step how-to tutorials. But keep them coming. Any info at this point is welcome here.
Lots of patience and oil. That cracked part is a concern - get a professional opinion. I did NOT power the drive until I had it freed. I then used the motor on low speeds to help the movement continue to get better. That old oil becomes like a glue, but more oil is the best solvent. I've had good luck with kerosene and Kroil. I've heard good things about CRC 3-36. Good luck!
SpiderLovesBeer Oh Yeah I do not know for sure. I mostly observe the machine and work with that information since I haven’t found repair info outside of UA-cam.
Do you find this machine a little snug when you turn the handwheel? I have oiled mine everywhere and it has freed up very considerably but i feel its not as the singer ones, i wonder if thats how this machine is supposed to be.
Good afternoon from Colombia, I need a toothed belt for the paff 130, the small sprocket has 10 teeth, please help me where I can contact
Good video
Greetings! Can you tell me the part number for this belt? The belt broke, there is no number, I can't find it .... Thank you.
Try Millard sewing center, that's where I got mine, not sure of the part number but they can help you with that
I am in the same situation as you. I have a 130 on my work bench. The Dial a Stitch is stuck. The needle moves up and down, but not sideways. I tried to replace its motor with a 1.5amp Accusew motor I bought on eBay but have yet to do it as a final step after cleaning the rest of the mechanisms. There is a hex rod under the machine which is cracked and I need that replaced first. The dial for the feed dogs is rotating, but it doesn't engage the feed dogs to move. I am overwhelmed. Any tips? Do you have an email to contact you so I can get some tips directly? Thanks, man. Keep up the videos. I wish they were step-by-step how-to tutorials. But keep them coming. Any info at this point is welcome here.
Lots of patience and oil. That cracked part is a concern - get a professional opinion. I did NOT power the drive until I had it freed. I then used the motor on low speeds to help the movement continue to get better. That old oil becomes like a glue, but more oil is the best solvent. I've had good luck with kerosene and Kroil. I've heard good things about CRC 3-36. Good luck!
Do you guys know if there’s a difference between the model 130 & 130-6 ???
SpiderLovesBeer Oh Yeah I do not know for sure. I mostly observe the machine and work with that information since I haven’t found repair info outside of UA-cam.
Do you find this machine a little snug when you turn the handwheel? I have oiled mine everywhere and it has freed up very considerably but i feel its not as the singer ones, i wonder if thats how this machine is supposed to be.
@@jph2329 Free really free and smooth