OMGoodness!! Thank you so much for this tutorial! You explained the steps so clearly and made it easy to set this up! Thank you, thank you, thank you!!!
I was trying to help my mom set hers up. When she goes to "Add" the machine to her database, nothing ever populates. Her laptop and machine (Babylock Vesta Embroidery) are connected to the same wifi. The database search eventually says "done" without ever finding anything. Any help would be appreciated.
I would suggest contacting her Baby Lock dealer where she purchased her machine from to see if they can walk you through some troubleshooting issues over the phone. Or contact Baby Lock directly for troubleshooting.
NOTE: Some people have been having an issue with not seeing their machine showing up on the Design Database Transfer even after following ALL of the instructions in the video. If that is the case, there may be too many wifi signal in the house and it's confusing the machine. Instead of hooking it up to your wifi, purchase a wireless router. Plug the wireless router near your machine, and using the password on the back, hook up both your machine and your computer to the wireless router. This seems to solve the issue and lets the machine connect to your computer program.
@@HayesSewingMachineCo thanks so much for following up with this!! I had facetimed her after my initial comment and basically made her start over everything from the start. We got it connected! Took a few tries but it eventually showed up. I will keep this in mind for future issues if we have them ☺️☺️ thanks for thinking of us!
You can use the software to look at embroidery designs and some of the data, you just wouldn't be able to send it over to the machine since it doesn't have wifi. You'd have to connect your machine or use a usb stick to transfer the design.
This is fine but nobody addresses what to do when the "add" button is pressed and no machine shows up, after hitting refresh still no machine after an update?????
Cheryl - few things to check. Make sure your embroidery machine is turned on and initiated past the entry screen. Make sure your wifi is turned on and enabled and that's its on the same wifi network as your computer. If you're still having issues, you'll need to contact Baby Lock for IT support.
NOTE: Some people have been having an issue with not seeing their machine showing up on the Design Database Transfer even after following ALL of the instructions in the video. If that is the case, there may be too many wifi signal in the house and it's confusing the machine. Instead of hooking it up to your wifi, purchase a wireless router. Plug the wireless router near your machine, and using the password on the back, hook up both your machine and your computer to the wireless router. This seems to solve the issue and lets the machine connect to your computer program.
I am having alot of issues with this program. I installed it, when I try and import pes files, it wants to reinstall the software every single time. It eventually transfers the file, but takes forever because of the install issue. I tried uninstalling and reinstalling, same thing happens. Always wants to reinstall
Just watched, AGAIN, in front of BabyLock and it worked perfect. Tip about getting WIFI to connect was very helpful.
Glad it helped!
OMGoodness!! Thank you so much for this tutorial! You explained the steps so clearly and made it easy to set this up! Thank you, thank you, thank you!!!
You're so welcome Annie!, glad it helped
This is such a great tutorial! Very clear and thorough! Great job. I hope you have more videos like this. I could really use them.
Glad you enjoyed it!
Do you have any video tutorials on the Babylock Flare? I would surely appreciate some of those.
I was just thinking about this program . Great timing great video. Thank you 🎉
Glad it helped Cheryl!
Thank you! :)
You're welcome!
Is this software compatable with Babylock Destiny 2
No it is not
Where can I find this software? The page on Babylock website is not available.
Baby Lock recently changed their website and they may not have everything switched over yet, so email them directly to get the new link
I was trying to help my mom set hers up. When she goes to "Add" the machine to her database, nothing ever populates. Her laptop and machine (Babylock Vesta Embroidery) are connected to the same wifi. The database search eventually says "done" without ever finding anything. Any help would be appreciated.
I would suggest contacting her Baby Lock dealer where she purchased her machine from to see if they can walk you through some troubleshooting issues over the phone. Or contact Baby Lock directly for troubleshooting.
@@HayesSewingMachineCo lol that's what I told her to do!! Thanks
NOTE: Some people have been having an issue with not seeing their machine showing up on the Design Database Transfer even after following ALL of the instructions in the video. If that is the case, there may be too many wifi signal in the house and it's confusing the machine. Instead of hooking it up to your wifi, purchase a wireless router. Plug the wireless router near your machine, and using the password on the back, hook up both your machine and your computer to the wireless router. This seems to solve the issue and lets the machine connect to your computer program.
@@HayesSewingMachineCo thanks so much for following up with this!! I had facetimed her after my initial comment and basically made her start over everything from the start. We got it connected! Took a few tries but it eventually showed up. I will keep this in mind for future issues if we have them ☺️☺️ thanks for thinking of us!
@@Gooterslaw You're welcome!
will this software work with a non-wifi Babylock? I have a Unity
You can use the software to look at embroidery designs and some of the data, you just wouldn't be able to send it over to the machine since it doesn't have wifi. You'd have to connect your machine or use a usb stick to transfer the design.
thank you!!@@HayesSewingMachineCo
This is fine but nobody addresses what to do when the "add" button is pressed and no machine shows up, after hitting refresh still no machine after an update?????
Cheryl - few things to check. Make sure your embroidery machine is turned on and initiated past the entry screen. Make sure your wifi is turned on and enabled and that's its on the same wifi network as your computer. If you're still having issues, you'll need to contact Baby Lock for IT support.
NOTE: Some people have been having an issue with not seeing their machine showing up on the Design Database Transfer even after following ALL of the instructions in the video. If that is the case, there may be too many wifi signal in the house and it's confusing the machine. Instead of hooking it up to your wifi, purchase a wireless router. Plug the wireless router near your machine, and using the password on the back, hook up both your machine and your computer to the wireless router. This seems to solve the issue and lets the machine connect to your computer program.
I am having alot of issues with this program. I installed it, when I try and import pes files, it wants to reinstall the software every single time. It eventually transfers the file, but takes forever because of the install issue. I tried uninstalling and reinstalling, same thing happens. Always wants to reinstall
Sorry you're having issues with it. You'll need to contact Baby Lock directly for technical support. Here's the link babylock.com/support/contact