Major BroncStar Steering Issue Requires Full Rebuild!
Вставка
- Опубліковано 12 гру 2024
- On X is offering my audience an amazing deal.... By clicking the link below you will save 20% off your 1 year premium or elite membership!
webmap.onxmaps...
We're bringing back the ol' BroncStar and putting in a new steering box
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton...
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Repair
On X is offering my audience an amazing deal.... By clicking the link below you will save 20% off your 1 year premium or elite membership!
webmap.onxmaps.com/purchase/offroad/membership?promo=layton20
Bring Dinner back keep hillbilly tho!
Does on x work in any state, how many trails are available for the state of Texas?
Sucks that you are ruining secret trails for the locals.
it is a good app in the usa anywhere else no.. as it does not work in australia
You are definitely on the right path. High steering arm → straighter drag link → pitman arm. If you figure out the geometry to match the bump-to bump to the steering turn-to-turn when you do the steering arm, you can install a steering arm length to match your pitman arm... And then you won't need to change the pitman arm. But the ideal set-up would locate the high steer tie rod joint where it minimizes bump steer for on-road driving (static ride height), and then the pitman arm would be designed to match that.
I used to have a 1964 international Scout, and one of the necessary upgrades was power steering. I used a Saginaw steering box with an Isuzu power steering pump and reservoir. It sure made my drive handle better. The fun part was drilling the hardened frame.
Just a thought for the editor (in case you didn't already have a heavy workload). 🙂
When Robbie snaps his fingers to jump to "tomorrow", I envision that an accompanying sound effect would add an extra dimension to the production. Exactly what - (siren, cowbell, oogah horn, breaking glass, etc) - would be for someone else to determine. Have fun. I am. 😊
A Rooster Crowing?
A swami flute player
Fabulous Show 😎
BroncStar is coming along nicely... it's sure to be a beast once completed ✅
Keep Up the Great 👍 JERB...
It’s so interesting to see how you work thru different challenges. Great example of thinking outside the box or outside the bushings. Great video as always.
The ol' BroncStar is turning into a real great off road machine!!! Nice !!!!
"Must of had Taco Tuesday" OMG Hillbilly I am still laughing. :)
Amazing that Demri could keep filming and hold the camera still!
Most excellent. Little by little. It’s a work in progress
Hillbilly it’s definitely coming along quite nicely buddy!!! There’s always something to be done on a build but hopefully soon the list will be much shorter!!!! Lol!!! Awesome job on the power steering modifications!!! I would definitely go with a high steering setup!!! It should help out better for when you get into tighter spots on the trails and keep things from getting binded up in tight spots also!!!! Well remember keep up all the hard work fellas!!!!
Would love a dinner update. I really miss him!
I feel that's a bit of a sensitive subject... Robby went out of his way to support him, and in return he bailed on the business. We all enjoyed him, but actions have consequences.
@@MrBigtime2 not true. Robby stated Dinner moved to be closer to his new wifes family. Know, before you post. How disinformation starts.
@@RamsinGabriel 😂... and how is that not bailing on the business? There is no misinformation here, just facts pal 👍
Dinner definitely missed something good
@@MrBigtime2 what a world you live in. Im sure you think the election was stolen to. LOL.
Great job guys....cam shots are awesome....we're getting soooooo close to seeing Hillbilly smile !!!!
BroncStar has morphed into a beast!! Looks great!
Thanks for sharing 😊.
Nice ! Thanks for sharing !
I am definitely enjoying the videos on the upgrades to the Bronc Star I can see a major improvement on doing the trail
Time to get a lathe in your shop! $75 dollars for 6 sleeves is aerospace pricing!! LOL
It's coming along nicely so far. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep Making. God Bless.
Great job figuring the steering out. I can commiserate with you on buying unneeded parts. It’s not just the expense but the time lost going to different places when you already had what you needed in hand. 😞
I totally LOL'd @6:27... "Taco Tuesday"!!! 🤣🤣🤣🤣
Really enjoy watching this channel. This little buggy is coming right along. 😎👍
Hey Robbie, you are doing great repairs and building. I thought you were paint and body man great videos 🎉
If you go high steer, go ahead and put hydraulic assist on it too and have the best steering possible and keep it road friendly.
The Bronc ⭐️ is gonna be money!👍🏼
Nice work!
You have a 4 link front suspension and really should be running full hydro steering , the geometry is fighting each other running a drag link.
Big Ed Roth fan, can't wait till the trike built.
Here comes the flames 🔥
Robby, you need a lathe, sleeves and inserts
Easy Peasy (or a shop close by)
Or 9/16 bolts turned down and retreaded to 7/16 on the end for a perfect fit
Lots of progress! Can hardly wait until it's done!
Please do something with the intake. You spend crazy time on selecting washers but overlook the most basic parts of the build
3:06 Those delta trikes need independent rear brakes, for steering at an considerable speed.
ie apply the inside (of the turn) brake to steer above 10mph.
The delta trikes need to never be driven at high speed. Absurdly unstable, just fun to look at.
Awesome video guys!
I really e joy all your content. Cowboy is such a humble guy. And your whole family and awsome . Just good down to earth people. And how is Dinner i really miss him being around?
Putting broncstar outside, cutting it, setting it on fire and then starting over with a different choice would have, in the end, been a better option, IMHO of course.
Robby on your vw trike, you might want to use a 1.4 VW TDI engine. Of course its drive by wire, but the neat thing is, you can get 75-90 mpg on it snd still have fun. Your source for that engine might be eBay UK. Those engines can be had for about $2-300, and the ECU is dirt cheap. You'll also need a throttle pedal and a wiring harness.
Why not a 1,9 td from an old VW rabbit, or the 1,6? No electronics to mess with. Exept 12v to the pump and glow plugs? The adapter plats from a VW transporter T2 diesel will be a direct fit. That would be the thing i would do.
Or use a Porsche engine from the years the vw was made, The Porsche engine should have the same bolt pattern to mount the engine.
@@johnnyhomegrownholmgren9999 the 1.4 is a TDI, a 3 cylinder, and a cast iron block, and would outperform the two you mentioned, and, the later ones produce 90 HP, depending on the car it came from. They also have a very good reputation for durability.
@@danrussell3439: That would work great.
@Farm_fab: Sorry to break the news.... The 1.4 is one of the worst engines that VAG ever made. But IF you like them, good for you. 👍
Thanks for the content
In all my 61 years I've never heard a come-along called a chain-along Robby.
That Trike project will be really cool to see.
Looks great guys....
Robby , I didn't see anything about your brother's stolen trailer & tools. Did he get them back and catch the thief??
What I would have done is use the pipe. Drill out the frame bushings to the outside diameter of the pipe. Cut the pipe to match the length of the bushings already in the frame. Weld the pipe to the frame bushings and you have a strong mounting for your steering box.
Very nice job Guys
If your steering isn't hitting the physical stops, you are risking damaging the steering box when you are at the limit (left or right) as the stress is on the box not the physical stops.
Great video and great job with your truck, but you should put hydraulic steering on it and God bless from GA and stay safe
6:27
TACO TUESDAY LMAO!!!!
Put the radiator in the back with a elect. fan
Nice work so far, be good when you get the high steering worked out.
5:04 Robby is being a Doc Brown, and sending us Back To The Future. 😂
Stick with it guys, you'll figure it out!
Great job gents missed the boss she pretties up that whole operation
Yeah the Broncstar!!
You need a two wheel drive astro van box. Put it in front of radiator and do high steering kit
20:37 Robbie there is a guy stealing tools behind you 😉
Sweet trike!! I’m working on one!! Please do a video on the trike!!!
Blow that engine up already!, And yes, a dinner update
great working relationship both robby and hillbilly and can't leave out demeri...keep improving on your vehicle's someday you might have to use it on a retrieval it's good to have retrieval vehicle's in good condition and robby and hillbilly have a great relationship working...keep making great videos 📹 and working together....we need your daughter to bring up some good riddles and we miss dinner time.... or where he's at and how he's doing..thanks for the great 👍 videos 📹...
Any update on Robbie’s brother theft ?
great job again.
Man what a shocker...Ford bronco with steering issues.
How does he see anything where he's going with all that in the front. Cool but not very usable. Good job guy's really coming along.
The BroncStar is making serious progress.
Question... Hillbilly, how do you see out to drive the Broncstar down the road? What with all the "extra add-ons" on the engine, it looks to be a bit "visually impairing". 🤔
Update on Dinner? Thank you!
good job!
Keep at it guys
Good Job 👍
Im guessing now Big Dinner has gone there is no keep fit schedule on the go. 🤷🏻♂️
You were all doing so well 😞
He quit in march and moved away…..
on that rig, a full hydro setup might be a better option. Just a thought
Time to move the super charger and cooler so that they don't block visibility on the trail. The broncstar can kick some butt on the trails.
As a motorcycle rider, I loath trikes. That being said, I can't wait to see Big Daddy's trike done! Too cool! Kounter Kulture!
High steer won't fix the length issue, still going to require a bit longer pitman arm... say 3/4 to 1in longer. What about a full hydrologic steering setup?
Amazing how much cash you are putting into your content :)
Yes but it's good advertising for his company, extra payment for his employees and sponsors are helping too. I love the content!
Im enjoying your content. But im missing Big Dinner. Any updates on how hes doing in his new place?
The tighter the better,
I'm guessing, 😊
Awesome video
I see Demri, I upvote... even if it was only in a commercial break...
That's what you call power steering by arm strong 💪 hahahahaha 😆😅
To bad onxoffroad is only available in the US?
New drinking game: Take a shot every time Robbie says “Hurry”. 😂
OMG Robbie i had one those trikes back in the mid 80's i needed a truck & traded it off for the truck the next week the guy broke it in half being drunk trying jump a hill !
Choppy Choppy on the Bronc Star
Hey have you guys looked into a 1979 ford F-150 4X4 steering box might work pretty good!
Good job 😊
Is there a story behind Hanging tree trail.
Nice
"We're gonna build that one day".
The trouble is that "One day " never comes while you have other things that need to be done :)
When is a lathe coming ,u then make things like those bushes ?
@Robby Layton, where is dinner, havent seen him lately, how is he? and robby are going to skin the broncstar?
Love the Channel, I do my best to watch on a regular, unfortunately I have been way way behind. I am finally all caught up. Definitely great builds. Love the LayMo.😂.. However I do have one question.. Where is Dinner??? Did I miss something or a video??? Keep up the great work!!
Make a sleeve from deep impact socket
👍
Yes, sir new video
Same thing only different!
10:14 Robby Sounds like Kermit the frog singing 😂😂😂
Hey Robby
Great 🇺🇸 as always 🇺🇸 👍
Rat Fink - the Best.
Robbie: please let Dinner know we miss him and wish him well.
I wanna come out and do a build collab with that Ed Roth trike Robby!!!!
$75 for 6 sleeves, wow! They saw you coming with a wad of cash.