Reverse bldc motor without changing wire | BLDC reversible switch

Поділитися
Вставка
  • Опубліковано 28 січ 2022
  • Hello guys ! I hope you all are healthy and fit
    Today I am gonna show you How to reverse bldc motor without changing wire by making BLDC reversible switch
    You guys always faced problem with Bldc motor, that if you want to make rc car from it.
    Even if you made one, you will face problem during reversing the RC car. So studying such problems I have came up with the unique solution, means this technique is never used before. Making Bldc reversible switch, which allows us to reverse brush less dc motor without exchanging those 2 cables again and again. I call it Bldc reversible switch. Mechanism is very easy to understand, but still if you are facing problem while making just follow me on Instagram. link is given below. Guys please make sure you understand this switch carefully, because small mistake could lead to serious damaging of Esc as well as Bldc motor.
    .
    👇homemade 4wd RC car 👇
    • how to make remote con...
    .
    👇6 Ch Dumbo RC transmitter 👇
    • Cheap Radio Transmitte...
    .
    if you like this video then hit the like button and share with your friends also subscribe my channel and press the bell icon. Thank You 😊 !
    .
    Follow me on Instagram -
    dpstechz_of...
    .
    #bldc
    #rchobby
    #diy

КОМЕНТАРІ • 34

  • @1onelifemanygoals561
    @1onelifemanygoals561 2 роки тому +3

    Loved it brother.. Was searching for the way to reverse bldc motor to make rc car go backwards...this seems perfect... Thank you for the idea 💡

  • @mrx.0000
    @mrx.0000 4 місяці тому +1

    that looks innovative

  • @TechXplore_official
    @TechXplore_official Рік тому +4

    A small relay would have been a simple and easy solution dear

    • @DPSTECHZ
      @DPSTECHZ  Рік тому

      I know bro, But handling such high amps by relay could lead to heating and damage of relay. But I would try different options. Thanks for suggestions

  • @MangalikaSriyani-wx8yh
    @MangalikaSriyani-wx8yh 24 дні тому

    Super brother❤😮

  • @susangpatil777
    @susangpatil777 2 роки тому

    mast aahe ... 👏👌

  • @amansharma1937
    @amansharma1937 2 роки тому +1

    Very nice

  • @sugeeshdrone2090
    @sugeeshdrone2090 2 роки тому +1

    Good work brooo

  • @TheSuperunul
    @TheSuperunul 2 роки тому +2

    Cool creation. How about using blheli 32 with Alka motor firmware

  • @amansharma1937
    @amansharma1937 2 роки тому +1

    Best

  • @CLAUDIOSRC9529
    @CLAUDIOSRC9529 Рік тому +2

    exelente my friend u got 1 mor subk

  • @onlinehelper374
    @onlinehelper374 2 роки тому +2

    Make a gearbox with forward and reverse gear. Use crown gears as clutches.

    • @anindyasen1171
      @anindyasen1171 2 роки тому +2

      That will be very difficult task only for revesing...

  • @coddingbaba7654
    @coddingbaba7654 11 місяців тому

    I make it from using of 2 chainal relay module but concept is Same as you nice video of you

    • @DPSTECHZ
      @DPSTECHZ  11 місяців тому

      Thank you 😊

  • @sombras.666
    @sombras.666 2 роки тому +2

    LIKE POSITIVO 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

  • @ankushff8703
    @ankushff8703 2 роки тому +1

    Receiver and remote kha se laye plz batana

    • @DPSTECHZ
      @DPSTECHZ  2 роки тому

      I have made video already on that

  • @pn_armwrestling
    @pn_armwrestling 2 роки тому

    Bhai apne apne subscriber itne jaldi kaise badai

  • @eshaanzahid5073
    @eshaanzahid5073 6 місяців тому

    or maybe just buy a bidirectional esc

  • @pn_armwrestling
    @pn_armwrestling 2 роки тому

    Bata do

  • @yousefamar288
    @yousefamar288 Рік тому

    This is a good solution to the problem ? but i have a question can you switch while the motor is running and everything is active??? Need help as fast as possible

    • @DPSTECHZ
      @DPSTECHZ  Рік тому

      You can try with relay, but make sure that it must handle high amps

    • @DPSTECHZ
      @DPSTECHZ  Рік тому

      Yes we can switch while motor is running

  • @lorenzogarcia9890
    @lorenzogarcia9890 Рік тому

    A simple rc car toy has a simple built-in forward and backward from the factory. Why this can not have that built-in forward and reverse control?

    • @DPSTECHZ
      @DPSTECHZ  Рік тому

      It's a BLDC motor. It works on 3 phase AC . It has an converter called ESC which converts DC to 3 phase AC. For reverse motion 2 wires needs to shuffle which creates opposite AC phase supply. This can't be done Directly. That's why

  • @anindyasen1171
    @anindyasen1171 2 роки тому +1

    These switches are pathetic. The are capable of taking load of 1A max. In the long run it will fail definitively fail. I do it by using DPDT relay. U don't need the servo even..

    • @DPSTECHZ
      @DPSTECHZ  2 роки тому

      Thanks for info

    • @anonymousguy7251
      @anonymousguy7251 3 місяці тому

      @anindyasen1171 Bro can you help me I wanted to implement this in my project but I want to reverse the polarity automatically not manually

  • @rctechnology9647
    @rctechnology9647 2 роки тому +1

    Padhne Mein subscribe kare