The skills are being passed on! I'm going to show my kid the bit about "legend up" on the caps. He's not into this kind of thing but it's wisdom that can be generalized. Thanks for these videos, very helpful.
Fantastic show here. I have one just like this from 2017. I have not had this issue, but it's good to see potential problems. It's always nice to seethe simple stuff again as a reminder. Thanks again for your expertise in the use of schematics. Always entertaining/educational. Wonderful job Stuart.
Nice clean fix Stuart, very interesting...Love the way you sneak around the amp and show practical examples of why these faults occur. Like the tea towel, cool info..Thanks for sharing,..Ed.UK.😀
Great channel! I have very little experience with amps but like to fix electronic devices in general. Your channel gives me access to so much experience (that I lack) which makes troubleshooting that much easier! So thank you so much for sharing these videos!
Great video Stuart.. Faultless diagnosis and a valuable lesson in reading a schematic. I wont repeat my mantra about Fenders production policies as I'm sure by now we're all aware of them. We must remember that Leo Fender was a skinflint and cut every cost he could on his product production, but the one thing he wouldn't do was sell you short term reliability.
Well deduced, Stuart! I give full marks for the brilliant modality in diagnosing this odd issue. To confess, it is one I have never seen occur. I am elated the customer agreed to the replacement of the caps in the doghouse. F&T are very reputable, and rarely if ever, fail. Since Leo's death, Fender has become a corporation who is single-minded of purpose to value profit far above quality. He must be spinning in his grave. Since he started with radio repair, his entire mantra was to design his amps to be serviceable. It is shameful that his legacy has been bastardized to the degree it currently resides. Thank you for posting this. I raise a pint to your health. Cheers!
@@goodun2974 Ok. JJ also now produce a range of HT caps. I wonder what they are, really. Hard to believe they make them in house. But they could, I guess.
Funny you talk about solder braid, I've also gone back to using it as my mine solder removal. I have the pumps, and even a good vacuum solder station, but I still like the 'wick' for the most part, especially on older gear with fragile traces.
I always find it funny that the capacitor outline on the pcbs better matches the caps you fit than those horrible ic caps, maybe whoever designed it had the better caps in mind originally? Then the budget department stepped in during production
My Deluxe reissue reverb works fine but not with the vibrato, its one or the other even after changing the pedal! seems these should be called fender electronic issues.. Great diagnostic BTW!
H Stuart. Really enjoying your channel and working my way through all your videos. As I really enjoy your teaching style I wondered if you might be prepared to do a tutorial on using an oscilloscope with guitar amps. I have watched loads of these but haven’t been totally convinced by any. Best regards, Paul
After watching your videos i think i might get the capacitors changed after buying a fender tube amp. Id quite like a vibrolux reverb or deluxe reverb. They are pretty expensive,you would think fender would use better capacitors. Brill video again,im learning a bit more each time i watch your videos.
Back in the day I was an examiner for City and Guilds electronic servicing courses, we always recommended the use of de-soldering braid. I find your videos fascinating and really useful as I use a 1973 pro reverb which has the dreaded turret board leakage problem. I’ve yet to try cleaning it in an attempt to reduce a bit of slight crackling. I’ve been into the doghouse (haven’t we all) and changed all the capacitors and received a shock (not electrical) as to how expensive the replacements were. Now Maplins are no longer in business, are there any similar retail companies in existence?
Thanks very much great to see , I have this hum/ buzz on my fender stage 100 it gets louder n louder and you can’t turn anything down to stop it. Turning it off at the mains is the only way , only happens if played load or distortion is switched on , any advice would be greatly appreciated as I’m about to take it apart to find this 4 year old fault.
Stu-Love your projects, and some of your shortcut methods that you have learned from experience and that seem to work so well. I saw the video of you using a Megger to test a capacitor in circuit for leakage, and thought that would be a great tool to have, so I bought a BM100/4 off of eBay, and now I'm trying to learn how to use it. I have its manual. I wanted to start by testing some old caps that have been removed from the circuit, and I didn't know if the Megger can be used to test out of circuit or not. The manual implies that the testing is done in circuit. Anyway, could you help me with this to get me up and running! Thanks again.
Thanks. It's just a 20uf 300VDC electrolytic cap. So I wanted to do the insulation testing that you did. The Spec Sheet indicates that the Insulation Test Voltage for the Megger is 500 VDC. Since my cap is old, it's from a 1975 Fender Music Master amp, and is only 300 VDC, it looks like the Megger's test voltage would be too high, and it would blow the cap. Am I correct?
I've just learned that you cannot test electrolytic caps for leakage with a Megger! But its still handy for coupling caps where we don't want any DC leakage to pass through with the AC.
The 220uf/100v cap is not the bias cap, it’s part of the odd Fender asymmetrical power supply caps, 47/500 + 220/100. All done to give the power supply 600v capacity.
Hi Jerry Okay, wow I didn't know that and didn;t check the schematic for this amp. Thanks for the info. I did wobder why it was 220uF which seemed high for the bias cap.
Yeah, I noticed that on the schematic and wondered "what the hell was Fender thinking"? Dissimilar series-wired capacitors not only increase the voltage handling of the pair, as one would expect, but also form a capacitive voltage divider, where the voltage inbetween those two caps isn't exactly half of the total B+ voltage, which might be handy if they wanted to tap off say 50 or 60 volts or so, whatever the difference might be at that point between the two caps, but it's not being used. (Also note the two different values of bleeder/balancing resistors). Or perhaps they just had a surplus of inexpensive 220 mfd, 100 volt caps. Otherwise, you'd expect to see a series pair of 47 mfd or even 100 mfd caps rated for 350 volts each.
@@goodun2974 I'm thinking the surplus was the case. Otherwise, I don't know what they were smoking that day. I just jumper it and use a 500V axial with capacitance value to user's taste.
65 DRRI ' when the reverb is turned on 10 it sounds like it's on 1 ' barley any reverb. It wasn't like that until I got it back from having it worked on. Has new tubes and supposed to have been recapped. Any idea?
Hard to say. Low revern is a tougher problem than no reverb. Long shot make sure the phono plugs are pushed firmly into their sockets. Sorry can;t help much more.
Hi Stuart, I have a Fender Hotrod Deluxe that the reverb volume is very low, you can hardly hear it. I already replaced the Potentiometer, I already tested the pan, I already reviewed the coax cables and I can't find the problem. Can you give me any more ideas please?
Hi Stuart - thanks for that. I notice you replaced C31 which was 100V 220uf with a new 100V 100uf. Obviously works from the video - but is that a normal thing to do. Thanks!
Yeah the gray IC caps are defective. Should always replace them when you see them. They sold the company and the new owner corrected the defect and changed the color to blue.
I just got mine B-Stock from Thomann, and the issue is idle hum noise, not super loud but still wish it was reduced, do you think replacing the tubes would be a good idea to start off?
Hi Wayne. Not sure but it's just another letter, e.g. the is an X and a Y HT supply so I guess Z follows. No real reason. Oddly the negative bias vvoltage is always called 'C'. Go figure! Sometime the HT is called B+.
@@stuartukguitarampguy5830 , The A, B, and C designations correspond to the batteries used for 1920s American radio sets, back in the days when all tubes were directly heated, 3-element triodes at most, and there were no "screen-grid" tetrodes nor indepently-heated cathodes. You couldn't run these tube types off of AC house current because there would be way too much hum (1920's filter capacitors weren't up to the job, as they were big, expensive, and of low capacitance value), and so the radios were powered by an A battery for the filaments, a B battery for the plates, and a C battery for the grid bias.
@@stuartukguitarampguy5830 , Just a few decades after those early battery radios were prevalent, the convention and nomenclature changed somewhat, so that when you look at a power supply from something built in the late forties or 1950s the highest voltage is usually called the A supply, the 2nd voltage/filter node is the B supply, and then the nodes are named C, D and E going down the line as the voltages are further dropped and filtered. And yet we still use B+ to refer to the highest voltage supply because of those "B" batteries 100 years ago!
@@stuartukguitarampguy5830 Yes it goes back to the old radio days in the 30s and 40's for WWII those letters meant something. Its looks like the voltage is Unregulated voltage and also no power conditioning meaning less power filtering for the reverb unit which I'm not sure why they are use less power conditioning for the reverb circuit stages?
I bet there are a number of your viewers that would like to build t.heir own "Stuart's Orininal capacitor box". What doe you say, Stu? Would you show a little schematic?
Hi Rich. Ok it's quite simple. Put a 100uF 500V cap in a box and bring out two wires, ground and positive. Across the cap put a 220K 2W resistor. This discharges the cap (slowly) if you happen to leave it charged, so next time you go to use it, it won't be 'live'.. Now put a momentary push switch in series with a 1K 5W resistor across the cap. Pushing the button connects this resistor across the cap, discharging it in a few seconds. Note there is a certain danger with this item. If you put the probes across a live cap in an amp, then removed the probes, then grabbed hold of the end of each probe you'd get a nasty shock as the internal 100uF cap discharges through your body! So you need to treat it with respect. I hope that helps.
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
The skills are being passed on! I'm going to show my kid the bit about "legend up" on the caps. He's not into this kind of thing but it's wisdom that can be generalized. Thanks for these videos, very helpful.
Hi Dennis. Great idea!
Those IC filter caps on Fender amps have been a dogs breakfast for amp techs. Great fix to an all too common problem.
Thanks David.
Fender uses glue that will last about thirty years to hold in electrolytic capacitors that will last about four years. Nice job Stuart.
Cheers Zack!
Warranty is 5 years so the caps are specifically chosen to last 5 years and a day. They save 50 cents per cap using them.
Great diagnosis, guys like you are tremendous asset. I hope your skills have been passed on.
Hi Martin. Alas no but my main reason for doing these vids is to help aspiring amp techs.
Fantastic show here. I have one just like this from 2017. I have not had this issue, but it's good to see potential problems. It's always nice to seethe simple stuff again as a reminder. Thanks again for your expertise in the use of schematics.
Always entertaining/educational.
Wonderful job Stuart.
Cheers Michael
Nice clean fix Stuart, very interesting...Love the way you sneak around the amp and show practical examples of why these faults occur. Like the tea towel, cool info..Thanks for sharing,..Ed.UK.😀
I'm never without my tea towel!
@@stuartukguitarampguy5830 😂😂
Great channel! I have very little experience with amps but like to fix electronic devices in general. Your channel gives me access to so much experience (that I lack) which makes troubleshooting that much easier! So thank you so much for sharing these videos!
Another channel to look into - Psionic Audio - Highly recommended!
Lovely, helped me down the road with my Twin. Bless
Glad to have been of service!
Great video Stuart.. Faultless diagnosis and a valuable lesson in reading a schematic. I wont repeat my mantra about Fenders production policies as I'm sure by now we're all aware of them. We must remember that Leo Fender was a skinflint and cut every cost he could on his product production, but the one thing he wouldn't do was sell you short term reliability.
I've seen the issue on 3 Deluxes Reverb Reissues, great diagnosis, well done! Everybody always thinks its the pan , tube or leads.
Damn I wish you'd been around to ask! I spent WAY longer than the video shows chasing hum loops etc.
I see you have the 4 x 12 Marshall cab under the bench. A mandatory workshop tool. I have one too. Another good video Stuart. Thank you.
Cheers. Yes I bought it cheaply because the actual cab is in shocking condition.
Great Job Stuart ‼️
Thanks Jerry.
Well deduced, Stuart! I give full marks for the brilliant modality in diagnosing this odd issue. To confess, it is one I have never seen occur. I am elated the customer agreed to the replacement of the caps in the doghouse. F&T are very reputable, and rarely if ever, fail. Since Leo's death, Fender has become a corporation who is single-minded of purpose to value profit far above quality. He must be spinning in his grave. Since he started with radio repair, his entire mantra was to design his amps to be serviceable. It is shameful that his legacy has been bastardized to the degree it currently resides. Thank you for posting this. I raise a pint to your health. Cheers!
Thanks Leon, yes I've not come across this before either but if you see elwrongo comment above it's apparently quite common.
Some of the other techs I subscribe to on UA-cam are also using MOD capacitors and have had good results with those so far.
@@goodun2974 Ok. JJ also now produce a range of HT caps. I wonder what they are, really. Hard to believe they make them in house. But they could, I guess.
@@stuartukguitarampguy5830 , TAD [Tube Amp Doctor] also sells their own line of capacitors.
@@goodun2974 That's "Tube Amp Doctor"
Funny you talk about solder braid, I've also gone back to using it as my mine solder removal. I have the pumps, and even a good vacuum solder station, but I still like the 'wick' for the most part, especially on older gear with fragile traces.
Exactly the ame for me. I have all the other gear but default to braid.
Good detective work Stuart.
Cheers Dennis.
I always find it funny that the capacitor outline on the pcbs better matches the caps you fit than those horrible ic caps, maybe whoever designed it had the better caps in mind originally? Then the budget department stepped in during production
Hi I've never really noticed that before, but now you point it out...
Skiled repair by very time served electronics engineer.
Thanks Wayne
brilliant Stuart!!!!
Thanks Paul.
great fix. as usally I learnt something new
Thanks Bjorn
Thanks Berkshire Amp Repair. Rock and Roll.
Glad you enjoyed it.
Thanks Stuart
Glad you enjoyed it John.
Good job frend. Allways.
Cheers Miguel.
My Deluxe reissue reverb works fine but not with the vibrato, its one or the other even after changing the pedal! seems these should be called fender electronic issues.. Great diagnostic BTW!
Nicely done, but you gave me the yips when you have the cap in the wrong orientation in the prep 😉
H Stuart. Really enjoying your channel and working my way through all your videos. As I really enjoy your teaching style I wondered if you might be prepared to do a tutorial on using an oscilloscope with guitar amps. I have watched loads of these but haven’t been totally convinced by any. Best regards, Paul
Hi Paul I'm pleased you are enjoying the channel. Thanks for the suggestion, I might do that video at some point.
After watching your videos i think i might get the capacitors changed after buying a fender tube amp.
Id quite like a vibrolux reverb or deluxe reverb.
They are pretty expensive,you would think fender would use better capacitors.
Brill video again,im learning a bit more each time i watch your videos.
Thanks Dave I'm pleased you are enjoying them.
Back in the day I was an examiner for City and Guilds electronic servicing courses, we always recommended the use of de-soldering braid. I find your videos fascinating and really useful as I use a 1973 pro reverb which has the dreaded turret board leakage problem. I’ve yet to try cleaning it in an attempt to reduce a bit of slight crackling. I’ve been into the doghouse (haven’t we all) and changed all the capacitors and received a shock (not electrical) as to how expensive the replacements were. Now Maplins are no longer in business, are there any similar retail companies in existence?
Psionic Audio on UA-cam has done a number of videos on measuring for, and removing conductive residue from Fender eyelet boards.
@@goodun2974 Thanks very much, I’ll have a look, much appreciated.
Thanks very much great to see , I have this hum/ buzz on my fender stage 100 it gets louder n louder and you can’t turn anything down to stop it.
Turning it off at the mains is the only way , only happens if played load or distortion is switched on , any advice would be greatly appreciated as I’m about to take it apart to find this 4 year old fault.
Annoyingly I have a schematic drawing I got when this first happened and just can’t find it.
This is Craig Macdonald not my wife Katherine 😂
great stuff
Thanks!
Thanks again for the tips Stuart! Also, I really like your theme music and logo! Did you play/write it?
Thanks David. No I got it done on one of these creative websites where freelancers pitch. Cost about £50 from memory!
@@stuartukguitarampguy5830 Thanks Stuart, I get a kick out of it every time I hear it :)
Stu-Love your projects, and some of your shortcut methods that you have learned from experience and that seem to work so well. I saw the video of you using a Megger to test a capacitor in circuit for leakage, and thought that would be a great tool to have, so I bought a BM100/4 off of eBay, and now I'm trying to learn how to use it. I have its manual. I wanted to start by testing some old caps that have been removed from the circuit, and I didn't know if the Megger can be used to test out of circuit or not. The manual implies that the testing is done in circuit. Anyway, could you help me with this to get me up and running! Thanks again.
No you can definitely test out of circuit. Check what DC voltage it produces though. You don;t want to put 1000V across a 400V cap!
Thanks. It's just a 20uf 300VDC electrolytic cap. So I wanted to do the insulation testing that you did. The Spec Sheet indicates that the Insulation Test Voltage for the Megger is 500 VDC. Since my cap is old, it's from a 1975 Fender Music Master amp, and is only 300 VDC, it looks like the Megger's test voltage would be too high, and it would blow the cap. Am I correct?
I've just learned that you cannot test electrolytic caps for leakage with a Megger! But its still handy for coupling caps where we don't want any DC leakage to pass through with the AC.
@@wsscott72 Defintely not! Coupling caps only - and higher voltage ones at that.
The 220uf/100v cap is not the bias cap, it’s part of the odd Fender asymmetrical power supply caps, 47/500 + 220/100. All done to give the power supply 600v capacity.
Hi Jerry Okay, wow I didn't know that and didn;t check the schematic for this amp. Thanks for the info. I did wobder why it was 220uF which seemed high for the bias cap.
Yeah, I noticed that on the schematic and wondered "what the hell was Fender thinking"? Dissimilar series-wired capacitors not only increase the voltage handling of the pair, as one would expect, but also form a capacitive voltage divider, where the voltage inbetween those two caps isn't exactly half of the total B+ voltage, which might be handy if they wanted to tap off say 50 or 60 volts or so, whatever the difference might be at that point between the two caps, but it's not being used. (Also note the two different values of bleeder/balancing resistors). Or perhaps they just had a surplus of inexpensive 220 mfd, 100 volt caps. Otherwise, you'd expect to see a series pair of 47 mfd or even 100 mfd caps rated for 350 volts each.
@@goodun2974 I'm thinking the surplus was the case.
Otherwise, I don't know what they were smoking that day.
I just jumper it and use a 500V axial with capacitance value to user's taste.
It's not needed, since the voltage is less than 400 volts. Some folks take the 220uF a and the
And the 100k resistor out. Jumper where the 100k was.
Stuart,
I'm looking for a good capacitor tester, could you make a recommendation please.
Thank you,
Mike
Hi Mike. Loads of them in eBay at about £30. They're all pretty much the same.
65 DRRI ' when the reverb is turned on 10 it sounds like it's on 1 ' barley any reverb. It wasn't like that until I got it back from having it worked on.
Has new tubes and supposed to have been recapped.
Any idea?
Hard to say. Low revern is a tougher problem than no reverb. Long shot make sure the phono plugs are pushed firmly into their sockets. Sorry can;t help much more.
😄😎 thanks Stuart
Glad you enjoyed it.
@@stuartukguitarampguy5830 I'm always learning about amps
Hi Stuart, I have a Fender Hotrod Deluxe that the reverb volume is very low, you can hardly hear it. I already replaced the Potentiometer, I already tested the pan, I already reviewed the coax cables and I can't find the problem. Can you give me any more ideas please?
Hi Fernando. Seems like you've tried the obvious stuff. I'm afraid you're going to need a tech to take this further. I hope you get it sorted.
Hi Stuart - thanks for that. I notice you replaced C31 which was 100V 220uf with a new 100V 100uf. Obviously works from the video - but is that a normal thing to do. Thanks!
Hi Matt I can;t recall tbh, but the correct value is 220uF 100V. Maybe I made a mistake? It wouldn;t make a huge difference.
@@stuartukguitarampguy5830 Thanks Stuart
man i wish i could do this to my Fender Twin. i have horrible noise coming thru the reverb channel.
I hope you manage to get it sorted!
Are the probes switched wrong way round at 14:13?
Yes well spotted. But it doesn;t matter as my meter can read negative voltage.
Yeah the gray IC caps are defective. Should always replace them when you see them. They sold the company and the new owner corrected the defect and changed the color to blue.
Interesting, so were the new blue caps better?
@@stuartukguitarampguy5830 yes I haven't had a bad one show up yet of the blue ones
I just got mine B-Stock from Thomann, and the issue is idle hum noise, not super loud but still wish it was reduced, do you think replacing the tubes would be a good idea to start off?
My view is that it wouldnt help. Hum can be caused by so many things, alas.
@@stuartukguitarampguy5830 what about other models? 65 or 68 custom pro,same issues?
@@mackk294 I can;t recall tbh!
STUART, why do they call it the ZED Supply? for the values that feeds the reverb springs
Hi Wayne. Not sure but it's just another letter, e.g. the is an X and a Y HT supply so I guess Z follows. No real reason. Oddly the negative bias vvoltage is always called 'C'. Go figure! Sometime the HT is called B+.
@@stuartukguitarampguy5830 , The A, B, and C designations correspond to the batteries used for 1920s American radio sets, back in the days when all tubes were directly heated, 3-element triodes at most, and there were no "screen-grid" tetrodes nor indepently-heated cathodes. You couldn't run these tube types off of AC house current because there would be way too much hum (1920's filter capacitors weren't up to the job, as they were big, expensive, and of low capacitance value), and so the radios were powered by an A battery for the filaments, a B battery for the plates, and a C battery for the grid bias.
@@goodun2974 Very interesting thanks I didn;t know that.
@@stuartukguitarampguy5830 , Just a few decades after those early battery radios were prevalent, the convention and nomenclature changed somewhat, so that when you look at a power supply from something built in the late forties or 1950s the highest voltage is usually called the A supply, the 2nd voltage/filter node is the B supply, and then the nodes are named C, D and E going down the line as the voltages are further dropped and filtered. And yet we still use B+ to refer to the highest voltage supply because of those "B" batteries 100 years ago!
@@stuartukguitarampguy5830 Yes it goes back to the old radio days in the 30s and 40's for WWII those letters meant something. Its looks like the voltage is Unregulated voltage and also no power conditioning meaning less power filtering for the reverb unit which I'm not sure why they are use less power conditioning for the reverb circuit stages?
Hmmm, dunno. (Pardon the pun) I've got two
of these amps and they are dead quiet at idle. Don't think your noise floor is correct yet.
Hi Yes it was fine when I finished.
At 23:47, what is that noise emanating from? Thanks.
Do you mean that clanging sound? I probably just knocked the amp and it rattled the reverb pan. I had the reverb full up.
@@stuartukguitarampguy5830 The "sh" sound. Very faint. Is this normal?
A certain amount of noise is normal. It's a tough line though to decide when something is 'too noisy'.
I bet there are a number of your viewers that would like to build t.heir own "Stuart's Orininal capacitor box". What doe you say, Stu? Would you show a little schematic?
Hi Rich. Ok it's quite simple. Put a 100uF 500V cap in a box and bring out two wires, ground and positive. Across the cap put a 220K 2W resistor. This discharges the cap (slowly) if you happen to leave it charged, so next time you go to use it, it won't be 'live'.. Now put a momentary push switch in series with a 1K 5W resistor across the cap. Pushing the button connects this resistor across the cap, discharging it in a few seconds. Note there is a certain danger with this item. If you put the probes across a live cap in an amp, then removed the probes, then grabbed hold of the end of each probe you'd get a nasty shock as the internal 100uF cap discharges through your body! So you need to treat it with respect. I hope that helps.
You might like the YT channel - Psionic Audio. Lyle an Amplifier Tech from Memphis Tennessee. Thanks for the upload Stuart!
Thanks Alex, yes that's one of the channels I watch.
Do u use a variac to power an amp up ?
Very rarely and only if the amp is blowing fuses on switch on.
P r o m o s m 💪