That’s water left in the valve and hose that leaks when disconnected. The water in the tank won’t leak out from removing the hose. Don’t know why they needed to flush the toilet.
if you hold the handle down for a bit, it drains most of the water - just check the tank, it will be below the flapper - if you have a towel nearby it's useful to catch any water left in the hose, but it should be minimal.
I HIGHLY suggest purchasing your own (brass) three way adapter. The “mega adapter” is plastic and very cheap. Near impossible to get it installed without a leak. Wish they’d just charge $10-15 more and include one. Other than that this is a great product
Thx I think this might be why I’ve not been successful yet at getting mine installed. The leaky. I’m gonna take your suggestion and go get the brass one.
Thanks for the video. I recently bought a Tushy for my Deaf friend. Please consider adding captions to your own video. Captions by the creator are more aesthetically pleasing and it’s a small step to take towards equal access and inclusion. 🙌🏼😃 The auto generated captions from UA-cam’s system are not adequate and can change words based on the annunciation of the speaker.
You had me all in until you started getting all inclusionary etc. You could of just said what you said without getting all politically correct. I am sure Tushy thinks that adding captions to their videos is a great idea. Not everything in life can be absolutely equal and fair. Most people do their best to help others out, just like you are doing for your friend.
@@teddycaras8570 Right? Imagine being so triggered by someone asking for closed captions to accommodate for hearing impaired folks, you have to be all “nOt EvErYtHiNg In LiFe Is EqUaL aNd FaIr.” She probably gets angry when she sees braille on an ATM.
Remember when this is installed under your toilet seat, it will raise your seat off the toilet bowl. Make sure you have long enough screws to accommodate for the extra space.
@@DeimosPC Indeed, I havent had to buy TP in so long since my last costco visit since people went stupid back in march aside from food of course, but man the investment already paid for itself & I laugh at everyone whos going nuts over TP hoarding again. Once you go, use it to clean up & pat dry your self & i bearly use any TP. Well worth buying one
I put the rubber washers between the bowl and the Tushy unit, to help keep it from sliding, and as a material buffer. The purple cap looks like an extra tip when the one on the spray nozzle needs to be replaced.
For $80 and the funny advertising, it's worth it. But buyer beware! This is not a TOTO or high-end Euro or Japanese bidet. Cold water up the whooohooo is a little disconcerting at 7a.
I got my Tushy Bidet installed. The one with the warm water option. Honestly the cold water isn't that bad. But to have the option to set the perfect temperature is luxury! Haha!
Don't over-tighten the connections. I did that and it deformed the rubber washer so it wasn't mating flush anymore. Just back it off a bit and re-tighten with only moderate force.
I just installed my new Tushy bidet. Was easy to istall but not sure what I can do because it is spashing from the back of the bidet and onto the floor. what should I do to fix this???
Wasn't hard to install the Tushy that my sister bought, but when it was done, the toilet seat no longer sits flush ? It no sits 1/2 too high at the front of the bowl ?
It doesn't take 9 minutes to install as it is actually pretty difficult to operate behind a toilet next to a wall. Like the product but the installation is a nightmare and they should make that real clear.
This is a thing. My toilet seat just snapped today because of the pressure due to the back being raised. We've had the Tushy installed for 2.5 years, and I'm actually surprised it didn't happen sooner. Will definitely need to check out these bumpers they recommended when I replace the broken seat.
Hmm - we'll def need to see your toilet to give you the best answer. Please send pics to install@hellotushy.com and a description of what you're experiencing so our team can help.
We followed the instructions as they were easy to follow. It should had been an easy installation until we found that the wired tubing kept coming off the three way adapter or the bidet connection. It would had been easier to connect those two first before connecting to the seat because we had to use a wrench to make sure the tubes were really going in.
Another option would be for Tushy to include a set of rubber bumpers that you can stick to the bottom of the toilet seat so it sits level. They would also need to beef up the instructions so you could measure your toilet set before you order so you would know what size bumper to ask for. If I left the original bumpers on the toilet seat I would probably be complaining about the angle of the slope too. Home depot has a package of those bumpers, but they only come in one thickness - 7/16 inch. But after installing tushy the back part of my toilet seat is now 10/16 inch above the lip of the toilet bowl. I am ok with the angle, but that is not going to get them 5 star ratings.
My toilet has the silver hose on the other side. Do you have mirror image units or does the pipe stretch? My toilet is quite close to the wall on the right (as you sit on it) so it might not fit?
I've had to unscrew mine on two toilets to replace the flush valve.. I swear that thing was tightened by the hand of god itself. You'll need a GOOD wrench to get it off of there with any kind of ease.
Well that sucks... Just got a classic unit, I live in Canada and my toilet is a standard crane unit. The nozzle hits the rim so it cannot be adjusted towards the back, it's all the way "up"... the extenders should be included with every unit, would save a lot of headache, especially since 99% of your customers probably aren't plumbers or bidet experts. Now, because the extender is so cheap (5$), I obviously don't qualify for free shipping. This is quite a bummer... badum tss.
I had that issue with my Fluidmaster toilet fittings. Turns out the wall valve hose had some weird proprietary conical fitting inside that wouldn't allow the megadapter to fully tighten down. I had to replace that SharkBite fitting with a more traditional one (after shutting off the water main and draining the entire house!). It's been fine ever since. I also decided to replace the float valve while I was at it because I was never satisfied with the paltry refill rate of the original part.
I'm now trying to install. And I have learned that the screw on my toilet seat...are too big for what's going on at 1:51. The screws go through! Is there any way Tushy can make little adapters for "larger sized screws"? :) In the meantime I'm rummaging through my screw collection to see if I have anything that'll fit the bill.
Word of warning: My water valve was stuck, so I tried to install it without turning off the water, and I did not expect A FIRE HOSE TSUNAMI TO COME OUT.
Incomplete installation, no instructions on how to attach a hot line too! I live in Canada, you know what it means to squirt cold water on your private parts with -20??!!
@@kmaggie924 Do you have to maneuver your butt to actually clean certain spots because I find the nozzle forward and backward angle adjustment doesn't seem to have enough angle to hit those spots then again, it's only been 2 days since I used it and still trying to figure how to properly use it.
The nozzle doesn't move the water flow enough for to me to notice it that much either, but it does move enough. A bit of trial and error showed me that you don't really have to move yourself around because really the water only needs to hit one spot (unless you exploded lol)
Hey Alexander, they have an answer on their website: hellotushy.com/pages/frequently-asked-questions I'm currently considering purchasing one myself. :)
Ok now show a video using a real toilet. One in your apartment that has old, leaky hoses- not one on the showroom floor at Home Depot. This project is way messier than the video suggests
THE TRUTH!!! My entire piece that is supposed to screw off easily is moving and I can't even separate it to attach the new piece.... it's so frustrating!!
Yeah, it's an annoyance, but Tushy seems to be aware of that. They reference "bumpers" for the seat in other video comments to offset the gap created by the bidet. That should handily resolve the issue.
This is a crappy product. The adapter is really cheap and flimsy plastic, and leaks. The Tushy connections leaked, but stuff off the shelf from Home Depot worked fine. Don't waste your money, there are similar and better products out there.
Mine just arrived and the nozzle does not move like here at 1:45. It barely moves at all, and the little lever feels mushy, not firmly connected. Should I try to return it? Anyone else run into this? Also thanks for the video. I wasn't completely 100% that I'm supposed to install the seat directly on top; seems like it'll snap the Tushy attachment body every time you sit ...
I disconnected the line from my tank after having had turned the water off and flushed the toilet, and a lot of pressured water shot out from the tube I disconnected from the toilet. Had to call a plumber to shut off my main water line. This video is so inaccurate.
SOMETHING YOU MUST TELL PEOPLE.... If your toilet has an older lid and not some cheap plastic one the lid WILL NOT OPEN after you install it!! VERY FRUSTRATING.... I now will need to go get either a new lid or a screw and washer set that will work together.... Don't be fooled by the happy go lucky music .... it is not!
Wow what a huge waste of time, money, and a lot of effort for something that leaked all over my bathroom. If you don’t have a flexible hose be prepared to get a flexible hose after wasting an hour trying to install it to a plastic one. None of the parts go together well at all. They show you an ideal plumbing situation to make this seem easy. Don’t fall for this.
Now I have to unassemble this pos and redo the original plumbing because I need a toilet to use. CRAZY I KNOW. You people should pay me for this waste of effort, money, and time. TRASH.
I laugh at the this video showing a woman installing the seat. My wife bought this as a surprise, and of course I got stuck with the job of installing it (like most husbands). It sits at a slant and the cold water on your butt is not nice. My wife and I hated it, and I have uninstalled it.
This was extraordinarily difficult to install. I'm four hours deep, heaven forbid the person before you cross threaded the coupling nut by the cold water entrance which now I have to go to the store and replace because they don't include one. Fuck this company and this product I can't believe they let people think it's a 10-minute install. I actually ought to return this and charge them for my fucking time. You need a plumber to install this don't think their marketing is actually true.
Word of warning: My water valve was stuck, so I tried to install it without turning off the water, and I did not expect A FIRE HOSE TSUNAMI TO COME OUT.
oh no! turning off the water source is a crucial step in the installation process! We don't recommend doing so if you can't turn it off... I hope everything is okay! If you need any help in the future please don't hesitate to reach out to one of our expert Poo-rus and they will be sure to assist you (install@hellotushy.com) :)
Missing a crucial step! Flushing does not drain all the water from the tank. A towel or bucket under the tank valve is needed.
lindylisa77 made that mistake! it was a water park in my bathroom!
I was suspicious when not a single drop came out of there in the video.
@@mpenatwork they did not test it, so it's most likely a prop toilet
That’s water left in the valve and hose that leaks when disconnected. The water in the tank won’t leak out from removing the hose. Don’t know why they needed to flush the toilet.
if you hold the handle down for a bit, it drains most of the water - just check the tank, it will be below the flapper - if you have a towel nearby it's useful to catch any water left in the hose, but it should be minimal.
I HIGHLY suggest purchasing your own (brass) three way adapter. The “mega adapter” is plastic and very cheap. Near impossible to get it installed without a leak. Wish they’d just charge $10-15 more and include one. Other than that this is a great product
Where did you find a brass one? Having trouble searching
did you try using any thread tape?
This thing is a pain in the ass (pun intended) to install only to find it leaks everywhere. You shouldn’t have to “rig your own bidet” it trash imo.
Thx I think this might be why I’ve not been successful yet at getting mine installed. The leaky. I’m gonna take your suggestion and go get the brass one.
Ima spend my stimmy on this
Yo this video is the PG version. I’m here clasping a wrench covered in toilet water. Was not specified in the manual.
Actually, not one drop came from the tank only a tiny bit from plumbing. My husband won't believe I installed this myself! Great and simple video!!
Thanks for the video. I recently bought a Tushy for my Deaf friend. Please consider adding captions to your own video. Captions by the creator are more aesthetically pleasing and it’s a small step to take towards equal access and inclusion. 🙌🏼😃 The auto generated captions from UA-cam’s system are not adequate and can change words based on the annunciation of the speaker.
Thanks for the note! We'll make a point to try and update them :)
You had me all in until you started getting all inclusionary etc. You could of just said what you said without getting all politically correct. I am sure Tushy thinks that adding captions to their videos is a great idea. Not everything in life can be absolutely equal and fair. Most people do their best to help others out, just like you are doing for your friend.
@@sewfishy1 kate why r u trying to get in a political argument on youtube under a bidet installation video 😂 get a life
@@teddycaras8570 LMAO right? thank you for the laugh this made my afternoon
@@teddycaras8570 Right? Imagine being so triggered by someone asking for closed captions to accommodate for hearing impaired folks, you have to be all “nOt EvErYtHiNg In LiFe Is EqUaL aNd FaIr.” She probably gets angry when she sees braille on an ATM.
Yo power move, they put two ads on a two minute video, and both of the ads are their own product
Remember when this is installed under your toilet seat, it will raise your seat off the toilet bowl. Make sure you have long enough screws to accommodate for the extra space.
Installed mine last week. Took 20 easy minutes. And it works! Well!
This doesn’t seem paid-for at all.
yeah i’ve been here for like 30 minutes just trying to unscrew my fucking sink thing
Can't wait for my next 💩 since I just installed one.
Does it make your seat lean forward? The base of the Tushy, looks really thick.
@@beetlejes No it doesnt, it lines up perfectly wirh your whole toilet seat.
@@joezilla1995 Still using it? Does it work well?
@@DeimosPC Indeed, I havent had to buy TP in so long since my last costco visit since people went stupid back in march aside from food of course, but man the investment already paid for itself & I laugh at everyone whos going nuts over TP hoarding again. Once you go, use it to clean up & pat dry your self & i bearly use any TP. Well worth buying one
🤣🤣
I don’t have a tushy. But dope video yo.
Just had a remodel and to add this thing asap
its truly life changing
came from the reddit meme hate to admit it but that "non-ad" worked
POV: i call my wife tooshie, i am on her phone at the gym and this is the first video i get when searching . Gotta say i might buy one of these
Listen with headphones LOUD at 1:03. You can hear why she needs this thing.
Probably wouldn’t hurt to add teflon tape lmao
It would be helpful to explain where all the other washers and caps go.
I put the rubber washers between the bowl and the Tushy unit, to help keep it from sliding, and as a material buffer. The purple cap looks like an extra tip when the one on the spray nozzle needs to be replaced.
edward ray mine came today and according to the included instructions, you are correct.
For $80 and the funny advertising, it's worth it. But buyer beware! This is not a TOTO or high-end Euro or Japanese bidet. Cold water up the whooohooo is a little disconcerting at 7a.
@@davidsuminski4243 Lol! Congrats. Just brace yourself… the first blast of h2O is COLD!
So there are ones that spray warm water?
@@mawage666 yeah toto makes em but they are fuckin pricey
Tushy makes a “spa” model that also connects to your sink for warmer washing
I got my Tushy Bidet installed. The one with the warm water option. Honestly the cold water isn't that bad. But to have the option to set the perfect temperature is luxury! Haha!
Tushy tush, I don’t understand why the toilet seat doesn’t sit flat on the bowl? Do you want the bum hole slanted?
I tried so hard and it kept leaking so over it. This looks easier to install than the tushy spa version
Classic is a little less work, but if you email our support team install@hellotushy.com they can walk you through any troubleshooting!
Buy and use plumbers tape on all seals to ensure a tight seal
Don't over-tighten the connections. I did that and it deformed the rubber washer so it wasn't mating flush anymore. Just back it off a bit and re-tighten with only moderate force.
Would this be a thoughtful gift for a wife?
I hope so.
Arrived today, so we'll see how it goes.
I'll update. Hold me accountable. ;)
While she was out with out daughter, watching watching The Nutcracker,
I stayed home with the son, and installed The Buttwasher.
Don’t forget the peloton bike
edward ray WHAT DID SHE SAY?!
how'd it go?????!!!!!
She's scared about UTIs and has not fully embraced it. I tried it and love it. :) MerryChristmas to me!
Now to convert the kids.
I just installed my new Tushy bidet. Was easy to istall but not sure what I can do because it is spashing from the back of the bidet and onto the floor. what should I do to fix this???
Wasn't hard to install the Tushy that my sister bought, but when it was done, the toilet seat no longer sits flush ? It no sits 1/2 too high at the front of the bowl ?
It doesn't take 9 minutes to install as it is actually pretty difficult to operate behind a toilet next to a wall. Like the product but the installation is a nightmare and they should make that real clear.
It’s really not. I just installed one 2 days ago and it was very simple
Doesn’t this elevate the back of the seat now so it’s at an angle? Isn’t that going to break the seat or tushy over time from uneven pressure?
Not usually - if this does happen, bumpers can be used to even things out!
This is a thing. My toilet seat just snapped today because of the pressure due to the back being raised. We've had the Tushy installed for 2.5 years, and I'm actually surprised it didn't happen sooner. Will definitely need to check out these bumpers they recommended when I replace the broken seat.
Looks very easy to install. Thank you!
I just shower after I go #2 and use the jet spray to clean it down there.
What of your water supply is on the opposite side? Also do you ship to NZ?
Waiting on mine.. Should be coming this week.
question. Do you guys make or considering making a left side tushy (left hand)?
Their website claims a left-sided Tushy is "in the production pipeline"
I have the Tushy spa, my toilet seat cover doesn’t fit on top. Do I need a special toilet seat cover?
Hmm - we'll def need to see your toilet to give you the best answer. Please send pics to install@hellotushy.com and a description of what you're experiencing so our team can help.
So all Tushys come with an adapter?
can you make an installation video for a toilet with a flushometer?
We followed the instructions as they were easy to follow. It should had been an easy installation until we found that the wired tubing kept coming off the three way adapter or the bidet connection. It would had been easier to connect those two first before connecting to the seat because we had to use a wrench to make sure the tubes were really going in.
I'm picking up one today!
What is I have a WaterSense toilet? Will the install still be the same?
If yall made a seat that raised the front to make it sit flush on the toilet id buy it. I hate the fact my seat leans forward
I havent even bought one of these and this was my immediate concern when watching the video. WHO WANTS TO POOP ON A SLOPE!? what a joke
Another option would be for Tushy to include a set of rubber bumpers that you can stick to the bottom of the toilet seat so it sits level. They would also need to beef up the instructions so you could measure your toilet set before you order so you would know what size bumper to ask for. If I left the original bumpers on the toilet seat I would probably be complaining about the angle of the slope too. Home depot has a package of those bumpers, but they only come in one thickness - 7/16 inch. But after installing tushy the back part of my toilet seat is now 10/16 inch above the lip of the toilet bowl. I am ok with the angle, but that is not going to get them 5 star ratings.
@@johnnymm3479 10/16 ? Mine is 5/8.
Bolts weren’t long enough with the seat. Have to find new ones to make this work.
Shoot us an email at install@hellotushy.com and we can get you squared away!
My toilet has the silver hose on the other side. Do you have mirror image units or does the pipe stretch? My toilet is quite close to the wall on the right (as you sit on it) so it might not fit?
Hey! Shoot our gurus an email with a pic of the sitch? fit@hellotushy.com They should be able to help you figure out how to best make it work :)
I can’t unscrew my flexible steel hose!! Help!!
You're screwed then
Lmao literally! I’m returning it 😔
Hey! Have you reached out to our CX team? Hello@hellotushy.com? You might have some calcium build up making it hard to unscrew.
I've had to unscrew mine on two toilets to replace the flush valve.. I swear that thing was tightened by the hand of god itself. You'll need a GOOD wrench to get it off of there with any kind of ease.
Hello TUSHY I reached out to customer service. I think it is calcium build up... I’m going to try lime away
Well that sucks... Just got a classic unit, I live in Canada and my toilet is a standard crane unit. The nozzle hits the rim so it cannot be adjusted towards the back, it's all the way "up"... the extenders should be included with every unit, would save a lot of headache, especially since 99% of your customers probably aren't plumbers or bidet experts. Now, because the extender is so cheap (5$), I obviously don't qualify for free shipping. This is quite a bummer... badum tss.
Be careful i installed and just gave myself an enema
mhm well, what do i do if the water supply isnt on the bottom left? mine is on the top right...
the condescending "you dont want any leaks!" when they send a product that leaks 😒
No matter what I do water keeps leaking from the mega adapter provided by tushy
Oh! Send us an email at install@hellotushy.com and we can take care of you
I had that issue with my Fluidmaster toilet fittings. Turns out the wall valve hose had some weird proprietary conical fitting inside that wouldn't allow the megadapter to fully tighten down. I had to replace that SharkBite fitting with a more traditional one (after shutting off the water main and draining the entire house!). It's been fine ever since. I also decided to replace the float valve while I was at it because I was never satisfied with the paltry refill rate of the original part.
love it, only way to go.
I'm now trying to install. And I have learned that the screw on my toilet seat...are too big for what's going on at 1:51. The screws go through! Is there any way Tushy can make little adapters for "larger sized screws"? :) In the meantime I'm rummaging through my screw collection to see if I have anything that'll fit the bill.
Hey! Shoot us an email? install@hellotushy.com, we'll try and help out :)
The screws were too short for our Tushy installation. Had to go to Home Depot to buy longer screws.🤔
@@tweetybug6536 came to comments just to find out if anyone else had this problem, thanks
Word of warning: My water valve was stuck, so I tried to install it without turning off the water, and I did not expect A FIRE HOSE TSUNAMI TO COME OUT.
Incomplete installation, no instructions on how to attach a hot line too! I live in Canada, you know what it means to squirt cold water on your private parts with -20??!!
it’s the music for me😂😂
is there a left side option? like for a person without an arm or something like that
At present we only have the right side console, but we're constantly iterating on trying to make our products more accessible for everyone!
You can just sit facing toilet tank and you will be fine. Good luck
The toilet seat plastic screws are too thick to through in the Tushy's holes.
Already resolved. Tushy sent us the proper screws.
Hey there! Shoot us an email at install@hellotushy.com and we can take a look!
I have the same problem
@@crystalkrumnaker1312 You should email us too!
Should've gotten a bucket and showed that it actually works by flushing.
Here from Reddit
I just installed my Tushy spa and it doesn’t work at all
There is no heated water, it's that cold?!?!
There's a half-inch gap between the bowl and the toilet seat when I installed the Tushy and the seat now angles down when sitting down on it. Any fix?
Sounds like you could use some bumpers! Can you shoot an email to install@hellotushy.com?
Same with ours. Trying to get it fixed as well
Other than that we LOVE it
@@kmaggie924 Do you have to maneuver your butt to actually clean certain spots because I find the nozzle forward and backward angle adjustment doesn't seem to have enough angle to hit those spots then again, it's only been 2 days since I used it and still trying to figure how to properly use it.
The nozzle doesn't move the water flow enough for to me to notice it that much either, but it does move enough. A bit of trial and error showed me that you don't really have to move yourself around because really the water only needs to hit one spot (unless you exploded lol)
Does it use a cold water? Is there any heater in the Tushy?
Hey Alexander, they have an answer on their website: hellotushy.com/pages/frequently-asked-questions
I'm currently considering purchasing one myself. :)
Their newer one can adjust temp but has to be connected to the sink too
Does it take the water from the wall or the tank??
Direct from the wall, the mega adapter splits the line. It never passes into the toilet.
Thank you, this was my concern!
Does the toilet seat not squish the Tushy bidet after putting it back on and anytime you sit?
Doesn't squish!
All this to clean my backside? I think I'll just use my hand....
Does this have warm water?
This one doesn't, but the spa version can shoot warm water.
best invention ever .. we love ours, on all our toilets!
Thats it I'm getting one.
You didn't put a flexible steel hose in my box!!! What do I do now???
You better hold your 💩 until they send it. Lol
That sucks, but it's a relatively common item at your local hardware store. Just pick one up if you can't wait.
@@MikeTrieu I agree you're totally right but when you pay money for something and it comes with missing parts you're like "fuck come on"
Ok now show a video using a real toilet. One in your apartment that has old, leaky hoses- not one on the showroom floor at Home Depot. This project is way messier than the video suggests
If you are having trouble with your TUSHY install please shoot us an email at install@hellotushy.com and we can take a look! :)
Every apartment, there's so much disgusting gunk and sht underneath the toilet seat screw covers and stuff. It's disgusting.
Inside the adapter there is a small cap-like piece. Does that stay in there when assembling? Very unclear. Pls let me know ASAP.
Adam Kwoka did you ever figure it out?
The cap is there as a blocker for the water stream, you keep it on so it can angle the water flow right up into your butt hole.
I ain't got any flexible anything on my toilet
Hey Adam - looks like an extra tip for the spray nozzle.
Nia Jax brought me here
We have these stuff built-in in the Middle East 🤣
Easy installation no problems
You left out the part where you need to install a real heated bidet after the cold water shock on your junk after using this a single time.
Cold water on my all sack and taint? Uh uh
Nothing is as simple as the instructions and video indicate. Just know this.
THE TRUTH!!! My entire piece that is supposed to screw off easily is moving and I can't even separate it to attach the new piece.... it's so frustrating!!
Does it work with cushioned toilet seats?
Sure does!
Mine is leaking like crazy and it’s installed correctly, the small pipe is leaking out lol
Hey Tony! Shoot us an email at install@hellotushy.com and we can take care of that!
Interesting name for a product that is very similar to an x rated site
Anybody else’s seat now extremely uncomfortable with this big bulky thing installed on the back side of the toilet so the whole seat is now tilted.
Yeah, it's an annoyance, but Tushy seems to be aware of that. They reference "bumpers" for the seat in other video comments to offset the gap created by the bidet. That should handily resolve the issue.
This is a crappy product. The adapter is really cheap and flimsy plastic, and leaks. The Tushy connections leaked, but stuff off the shelf from Home Depot worked fine. Don't waste your money, there are similar and better products out there.
Fuckin tremendous 💯💯💯
Mine just arrived and the nozzle does not move like here at 1:45. It barely moves at all, and the little lever feels mushy, not firmly connected. Should I try to return it? Anyone else run into this?
Also thanks for the video. I wasn't completely 100% that I'm supposed to install the seat directly on top; seems like it'll snap the Tushy attachment body every time you sit ...
Hey! You might want to try moving the attachment a bit forward on the seat - if it's too far back you can't get the full range of motion.
@@HelloTUSHY Unfortunately it was like that before I even installed it.
My lid/toilet seat now stuck open unless you're sitting on it. Any solutions?
Can you shoot us an email with a picture? install@hellotushy.com
@@HelloTUSHY thanks! I have already sent an email with pictures a while ago. Should I resend?
I disconnected the line from my tank after having had turned the water off and flushed the toilet, and a lot of pressured water shot out from the tube I disconnected from the toilet. Had to call a plumber to shut off my main water line. This video is so inaccurate.
anyone else buy the ludwig bidet?
SOMETHING YOU MUST TELL PEOPLE.... If your toilet has an older lid and not some cheap plastic one the lid WILL NOT OPEN after you install it!! VERY FRUSTRATING.... I now will need to go get either a new lid or a screw and washer set that will work together.... Don't be fooled by the happy go lucky music .... it is not!
Just got a tushy add
Wow what a huge waste of time, money, and a lot of effort for something that leaked all over my bathroom. If you don’t have a flexible hose be prepared to get a flexible hose after wasting an hour trying to install it to a plastic one. None of the parts go together well at all. They show you an ideal plumbing situation to make this seem easy. Don’t fall for this.
Now I have to unassemble this pos and redo the original plumbing because I need a toilet to use. CRAZY I KNOW. You people should pay me for this waste of effort, money, and time. TRASH.
I fixt my tushy
Steezy kane
Toilet paper shortage? Never again
Mega adapter my ass (no pun intended) broke my pipe screwing it on and sliced my finger :(
Any bidet users want to explain the sensation of using a bidet to me. Im scared it’ll shoot right up my buthole and I dont think
ill enjoy that.
Terrible product. Doesn’t even remotely fit my standard toilet. Automatic return
Fits my toilet just fine lol. Calm down slick
I laugh at the this video showing a woman installing the seat. My wife bought this as a surprise, and of course I got stuck with the job of installing it (like most husbands). It sits at a slant and the cold water on your butt is not nice. My wife and I hated it, and I have uninstalled it.
Not once has this thing cleaned my ass 100%. Not once. NFG.
Whaddup people FUCK toilet paper
gross, the sprayer is goona get dookie all over it. No thanks, i'll go asian style with the hose sprayer
This was extraordinarily difficult to install. I'm four hours deep, heaven forbid the person before you cross threaded the coupling nut by the cold water entrance which now I have to go to the store and replace because they don't include one. Fuck this company and this product I can't believe they let people think it's a 10-minute install. I actually ought to return this and charge them for my fucking time. You need a plumber to install this don't think their marketing is actually true.
how does it hit the hole if the nozzle is pointing down...
The spout actually pops out from the nozzle and sprays forward.
Hello TUSHY ohhh ok thanks!
Good point T. William. They need to reverse engineer this pile of crap.
Word of warning: My water valve was stuck, so I tried to install it without turning off the water, and I did not expect A FIRE HOSE TSUNAMI TO COME OUT.
oh no! turning off the water source is a crucial step in the installation process! We don't recommend doing so if you can't turn it off... I hope everything is okay! If you need any help in the future please don't hesitate to reach out to one of our expert Poo-rus and they will be sure to assist you (install@hellotushy.com) :)