John Deere CH960 2 Row Sugarcane Harvester in Louisiana 4K

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 51

  • @kylekleman
    @kylekleman Рік тому +1

    Great video! Why was the tractor pushing the wagon backwards?

    • @AerialAg
      @AerialAg  Рік тому +2

      Thanks! It's because they were opening a new block of cane. Some farms have the tractor roll over the cane when opening a new block, but this one prefers to open this way.

  • @barryrichardson534
    @barryrichardson534 2 роки тому +3

    Hello from Australia. What weight do you fill into the Haulout Bins? I love the Dual Row Harvesters. In my Area in Bundaberg Qld we hav a couple of Custom made Dual rows machines but I havent seen any John Deere units.

    • @AerialAg
      @AerialAg  2 роки тому +1

      Hello, I believe those wagons are 10 ton capacity. From what I heard they are starting to bring some Deere 2 rows out your way. Not sure why its taken them so long, there is surely a market for them down under. I've seen a few videos of those custom built two rows (Young?) they are impressive machines for sure.

  • @piperdoug428
    @piperdoug428 3 роки тому +1

    There’s just something therapeutic about watching these videos, thanks

    • @AerialAg
      @AerialAg  3 роки тому +1

      Thanks for watching!

  • @jayssonmaarques1585
    @jayssonmaarques1585 11 місяців тому +1

    How this lower flap works at the elevator exit

    • @AerialAg
      @AerialAg  11 місяців тому

      It just stops cane from being dropped out of the wagon.

  • @fernadogarcia4255
    @fernadogarcia4255 2 роки тому +3

    Olles amigo como puedo ir atrabajar a luisiana aki vivo en phoenix arizona pero llo soy de rancho y se manejar tranctores en mi pueblo andava en la zafra de caña como me puedes alludar

    • @luisdanvizcaino3899
      @luisdanvizcaino3899 2 роки тому

      How do I get a work visa to cut sugar cane in Louisiana? I have experience with these machines.

  • @richwielechowski5191
    @richwielechowski5191 3 роки тому +2

    Fun to watch the egrets in and around the machines looking for insects. How far along is harvest in this area? Thanks for sharing.

    • @AerialAg
      @AerialAg  3 роки тому

      That area should finish around New Year I believe. They started late September/ early October. Thanks for watching

  • @BRPFan
    @BRPFan 3 роки тому +5

    Great video! 👍With that two row they can really get things done! Is it still a prototype or is this a retailed harvester?

    • @AerialAg
      @AerialAg  3 роки тому +3

      Thanks! This is the retailed version.. Really hoping to catch one with brand new paint next year

  • @marks_sparks1
    @marks_sparks1 3 роки тому +1

    When does the harvester operator decide not to use the front trimmer on the green stalks?

    • @christopherlovelock9104
      @christopherlovelock9104 3 роки тому +1

      @marksandsparks1 - When he wants to be able to at least see the rows in front, especially on that twin row machine. Those 'cutters' don't seem to me to be awfully effective unless the stalks are completely upright, - and nine times out of ten they aren't. Plus from the few 'in cab' shots I've seen, they produce a hell of a 'blind spot' right in front. I think they would be better if they could be 'swung' to the side to cut the next row/s that he will be cutting down.

    • @AerialAg
      @AerialAg  3 роки тому +1

      When the cane leans a little bit, the topper cant catch the green tops. At that point they usually turn it off.

    • @armandkeller8831
      @armandkeller8831 3 роки тому

      How long before they pull those toppers off like the did on the Cameco? Lol. Always looks forward to your videos.

    • @AerialAg
      @AerialAg  3 роки тому +2

      Armand Keller They said they're leaving it on for now.. thanks

  • @christopherlovelock9104
    @christopherlovelock9104 3 роки тому +1

    Great video -loved it. - Especially the shot from 6.20 to 6.35, - did you get covered in 'cuttings' or only the camera.? - Some of those tractors were absolutely 'smothered', - I see the wise ones either went backwards or at least tried to keep as much as possible out of the way. Don't those engines overheat with all that 'glued to the rad' etc.

    • @AerialAg
      @AerialAg  3 роки тому

      First off, thank you . .. No I have a tiny tripod for my GoPro. So I set it in between the rows and let it record .. the tractors usually don’t have a problem with the shucks since they’re usually in front of where the secondary fan is blowing

  • @spreader4
    @spreader4 Місяць тому

    Great video pure sound

  • @ewerton1994
    @ewerton1994 2 роки тому +2

    Good vídeo, i have been work for 9 years in a jonh deere harvester here in brazil, my dream is to go work there in This place

  • @FEVB
    @FEVB Рік тому

    How come the top cutter is not being used?

    • @AerialAg
      @AerialAg  Рік тому +1

      The cane was leaning a bit too much and it couldn't catch it

    • @FEVB
      @FEVB Рік тому

      @@AerialAg Interesting! So what's the actual purpose of the toppper when the cane is upright since it seems like it can still be harvested with the tops?

    • @robertaus8420
      @robertaus8420 Рік тому

      @@FEVB when you are in standing cane topping it makes it easier to clean so you can increase your ground speed.

  • @garykemp6436
    @garykemp6436 3 роки тому

    Great video Al keep them coming

  • @24TRUTH1
    @24TRUTH1 4 місяці тому

    Very cool! Always loved watching any kind of combine/harvester work. Amazing! #SupportFarmers #NoFarmersNoFood ❤️🚜🌽🐄🐔

  • @luisdanvizcaino3899
    @luisdanvizcaino3899 2 роки тому

    How do I get a work visa to cut sugar cane in Louisiana? I have experience with these machines.

  • @AntonFujdiak
    @AntonFujdiak 3 роки тому

    Great video 👍

  • @nextpagetamil
    @nextpagetamil 2 роки тому

    Topper is not used most of the harvesters... It should automated to move balancing the height of cane

    • @robertaus8420
      @robertaus8420 Рік тому

      I use mine to block the sun when it’s blinding me. Not sure
      If automated will help hahahaha

  • @maik.henriquee
    @maik.henriquee Рік тому

    _How much is the salary of a harvester operator there in the United States???_

  • @luisdanvizcaino3899
    @luisdanvizcaino3899 2 роки тому +1

    I have experience with the CH960

  • @RodolfoTatan
    @RodolfoTatan 3 місяці тому

    azúcar alcohól yabono Saludos desde Bolivia para todos bien gracias 🙋‍♂️👷‍♂️🚜🚜🚜👨‍💻👍

  • @joaosousa90049
    @joaosousa90049 2 роки тому +1

    I worked with one in Brazil

  • @falandodehidraulica6054
    @falandodehidraulica6054 2 роки тому

    Show, greet channel!

  • @kopchaiwongkaew5522
    @kopchaiwongkaew5522 3 роки тому +2

    ผมดูคลิปรถตัดอ้อยของคุณทุกคลิปเลย อยากเห็นรุ่น cameco 2500 มั่งครับ 🇹🇭🇹🇭

  • @vanderleimachado966
    @vanderleimachado966 3 роки тому +2

    Os vídeos são muito show!!! Mas poderia incluir os tratores descarregando.

  • @genecypereiradasilva2427
    @genecypereiradasilva2427 5 місяців тому

    Boa noite ten curso sobre este máquina

  • @damiaopereira8456
    @damiaopereira8456 2 роки тому +1

    👏👏👏👏👏

  • @luisdanvizcaino3899
    @luisdanvizcaino3899 Рік тому

    Bonita máquina como puedo Trabajar ahí estoy en España y tengo 15 años de experiencia

  • @tanagorn_utube2527
    @tanagorn_utube2527 2 роки тому

    Great

  • @EdgarPerezPenso-gn9tx
    @EdgarPerezPenso-gn9tx Рік тому

    Tremenda maguina

  • @RodolfoTatan
    @RodolfoTatan 3 місяці тому

    deoyondil elevando valtra 128

  • @RodolfoTatan
    @RodolfoTatan 3 місяці тому

    sienponto 100👍👨‍💻🚜🚜🚜

  • @RodolfoTatan
    @RodolfoTatan 3 місяці тому

    tras tor mas si for

  • @WilliamAila-rj6gm
    @WilliamAila-rj6gm Рік тому

    Je