Thank you so much! I do have dies that I wanted to use so very badly but could never get clean cuts so like you said, I set them aside & just avoided using them. I can’t wait to try these tips on them & use my dies again!!
GREAT TIPS. THANK YOU. I saw a video that shows using bubble wrap envelopes. You cut the bubble wrap to the size needed. (1) Lay down the bubble wrap, bubble side up. (2) Lay the cardstock on top of the bubble wrap. ( 3) Lay the die on top of the cardstock. . Layer cutting plates how you would normally. This cuts beautifully. (Now I keep my used bubble envelopes instead of throwing them away.) It also worked beautifully.
I wish I had seen this video long before Christmas, when I was die cutting 120 intricate Poinsettia die cuts. I made so many mistakes, and ruined so much card stock, not to mention, tearing my hair out, (and I haven’t got that much to tear out). I have a Big Shot, and a small cutting machine, and a new Gemini electric, which I purchased three months ago and I’m too afraid to use it, how stupid is that? Anyway, I did eventually achieve the desired number, but it was a real labour of love. Thank you so much for this wonderful video, you are a real expert and a brilliant trainer in the art of card making tips.
THANKYOU. I'm old school and always have dies face up never had a problem. Your education helps me realize why. I was wondering if it would be safe to put cuttung plates in the dishwasher? Also,can I share this link with others?
HELP, One thing though, sometimes I get fine slithers of paper around the cuts, especially when I run the die through twice? Any tips for this? I normally have a tooth brush that I use to brush these away, but they seem to be really fine? Great tip today! I’ve been doing this for a while now and you’re spot on! It’s frustrating, but when you know how it becomes more enjoyable crafting! Thanks heaps Lou xx
Just this week I threw two nesting dies in the waste basket. Luckily I haven’t emptied it yet. You have given me hope. Excellent explanation. Thank you!
What FABULOUS tips you’ve shared. I’ve been card crafting with dies for YEARS and have never seen most of your tips. THANK YOU SOOOO much❣️I’m going to pull all those forgotten intricate dies back out and show them the love I had when I bought them!🤩❤😍
Good tips - I always have my dies face up as this was the recommended method when I got my first Big Shot machine., I also take the dies through at their narrowest way round and often at an angle too - I still have dies that give problems. I have realised that some cardstock is more resistant than others. When a newbie at die cutting, I got waxed paper for using with dies, to help with removal - and used it all the time, but now I don't do die-cutting as much, due to only having a big shot plus in working order and it's heavy awkwardness at getting down & back up to its shelf, and have lost the habit of remembering the wax paper, for those intricate dies!
Years ago we were encouraged to put wax paper between the die and cardstock. Possibly to make it easier to get all the bits out, I can't remember. Thank you for the comprehensive tutorial. So nice to be talked to without being patronised 😊
❤l thought it was because my old Big Shot was worn out but find it still happens with electronic machines so I found your explanation and demo very informative, Thank you!
Fabulous! I noticed that my new fold away big shot actually says to put the card on top of the die instead of the way we have been doing it. I didn’t like that at first because it meant that sometimes I needed to tape it in place and then turn it over but knowing why helps! Maybe they have watched your videos?! Thank you! 💕
I've been papercrafting for almost 30 yrs (😮) and thought I knew all the tricks for diecutting. And I do, but yours are next level! I will be incorporating these. Thank you, also, for the clear explanations and the science 😊
Thank you for sharing your crafty knowledge with us. I knew the tip but your explanation as to why we should put blade up made it make sense. I didn’t know about the types of paper could be the reason why dies didn’t cut through.❤
SO very helpful, Thank You!! There are definitely certain papers that are a near to cut! Any more tips on distinguishing different types of paper for specific uses like this would be immensely helpful! I never get past the colors enough to look at the rest of the qualities !! 🧑🏼🎨😀💗
I am currently waiting for my sidekick replacement machine, but a friend shared this with me & I am saving this to try when it arrives, because I also have die issues like so. Your video has now given me an extra reason to anxiously await my machine😅 hope it works Thank you for sharing this🌻
Thanks so much Lou as a newbie I replaced my die cutting machine and plates to no avail. Bought the big shot plus and it was no better...now I know why! Even bought an intricate die metal plate! Can't wait to use my gorgeous intricate dies now! Happy New year hunni xx
Thank you so much I really really enjoyed watching you take us all through these helpful and useful tips. I’m going to put this into practice with my intricate dies. Please stay safe and well too xxxx Mags ❤❤❤❤
Aaaack! This is sooo helpful, thank you! I've gotten rid of so many intricate dies because I got tired of fiddling with them, I thought it was the dies. Your tips would have helped for sure. So if I had known, (sigh...). Time to go buy a couple of intricate dies and see the magic happen! Or at least not be afraid to buy an intricate die I would like, when I see one. Any tips for using wax paper or freezer paper to release all those tiny pieces? Thank you again, so much!
Thank you so much for the great information! I've had so much angst with the ghosting that I've almost entirely given up on die cutting. I'll try using textured paper and see how much love I can give to my intricate dies!
Thank you so much for this video! So very helpful. I love those intricate dies but have struggled with getting clean cuts. Looking forward to trying out all these techniques! By the way, M2S’s desk vacuum is perfect vacuuming up those little bits of paper stuck on cutting plates when using intricate dies!
Your tips and explanations are absolutely brilliant. I have several new intricate dies, thank you for helping me use them correctly from the beginning!
Great tips Lou. I do have some dies that I not only avoid but have put into my giveaway pile. I’m going to rescue them and give these tips a trial. Thank you so much.😊
Trust me everyone - I followed this advice from a previous video - and bingo, it works!
By far 🎉 one of the most comprehensive and easy to understand and follow videos on intricate dies. Well done and thank you!!!!!!
Never have I seen such a good video packed with info about all you need to know about one topic. Well done! I hope you get lots of views 🥰👍🏻
Yes! Now I know why some cardstock does not work for die cuts! Thank you Lou for the wonderful explanation!
I’ve been die cutting for years and didn’t know about the fibres, it makes perfect sense. Thank you, proves you can teach an old dog new tricks 😉
I’ve used the cardboard from cereal box for shims(s) and I’ve used cereal containers Inside the box between the diecut and the paper
Thank you for all these great tips !!!!!
I think I can use a few !!!!!!!!!
I often use very intricate dies (Diesire) and will hav issues with a clean cut. This was very informative and helpful
Thank you. This rocks so well !
Thank you so much! I do have dies that I wanted to use so very badly but could never get clean cuts so like you said, I set them aside & just avoided using them. I can’t wait to try these tips on them & use my dies again!!
Thank you soooo much. Works.
Glad it helped
GREAT TIPS. THANK YOU.
I saw a video that shows using bubble wrap envelopes. You cut the bubble wrap to the size needed. (1) Lay down the bubble wrap, bubble side up. (2) Lay the cardstock on top of the bubble wrap. ( 3) Lay the die on top of the cardstock. . Layer cutting plates how you would normally. This cuts beautifully. (Now I keep my used bubble envelopes instead of throwing them away.)
It also worked beautifully.
I wish I had seen this video long before Christmas, when I was die cutting 120 intricate Poinsettia die cuts. I made so many mistakes, and ruined so much card stock, not to mention, tearing my hair out, (and I haven’t got that much to tear out). I have a Big Shot, and a small cutting machine, and a new Gemini electric, which I purchased three months ago and I’m too afraid to use it, how stupid is that? Anyway, I did eventually achieve the desired number, but it was a real labour of love. Thank you so much for this wonderful video, you are a real expert and a brilliant trainer in the art of card making tips.
Brilliant!
THANKYOU. I'm old school and always have dies face up never had a problem. Your education helps me realize why. I was wondering if it would be safe to put cuttung plates in the dishwasher? Also,can I share this link with others?
Yes, you may share the link with others :) As for the cutting plates, I'm not so sure if it's okay to put them in the dishwasher.
Ty for great advice!! X
I don't always know what it is when I'm done.
Thank you, Lou, this was very instructive! And what gorgeous dies, too!
Absolutely Brilliant thanks so much for the tips ❤
Thank you Lou. Makes so much sense.
Thank you ❤
HELP, One thing though, sometimes I get fine slithers of paper around the cuts, especially when I run the die through twice? Any tips for this? I normally have a tooth brush that I use to brush these away, but they seem to be really fine?
Great tip today! I’ve been doing this for a while now and you’re spot on! It’s frustrating, but when you know how it becomes more enjoyable crafting! Thanks heaps Lou xx
Tape your die in place, the second pass the die is moving a tiny fraction, hence the slivers
Happy New Year Lou, another tip is to wipe a solid bar of soap across the die, it helps release the die :)
Just this week I threw two nesting dies in the waste basket. Luckily I haven’t emptied it yet. You have given me hope. Excellent explanation. Thank you!
Lou, this was so very helpful!! You explain things so very well!! You are a great teacher!!! Thanks so much!!
Thank goodness for this video !!!
What FABULOUS tips you’ve shared. I’ve been card crafting with dies for YEARS and have never seen most of your tips. THANK YOU SOOOO much❣️I’m going to pull all those forgotten intricate dies back out and show them the love I had when I bought them!🤩❤😍
Good tips - I always have my dies face up as this was the recommended method when I got my first Big Shot machine., I also take the dies through at their narrowest way round and often at an angle too - I still have dies that give problems. I have realised that some cardstock is more resistant than others. When a newbie at die cutting, I got waxed paper for using with dies, to help with removal - and used it all the time, but now I don't do die-cutting as much, due to only having a big shot plus in working order and it's heavy awkwardness at getting down & back up to its shelf, and have lost the habit of remembering the wax paper, for those intricate dies!
Great information , now i understand with the last demo about the card stock.
Very helpful tips. I’m so happy you are doing these videos.
Years ago we were encouraged to put wax paper between the die and cardstock. Possibly to make it easier to get all the bits out, I can't remember. Thank you for the comprehensive tutorial. So nice to be talked to without being patronised 😊
❤l thought it was because my old Big Shot was worn out but find it still happens with electronic machines so I found your explanation and demo very informative, Thank you!
Really clear and concise. Thank you. You are so skilled as a UA-cam presenter...
Excellent tips!
Fabulous! I noticed that my new fold away big shot actually says to put the card on top of the die instead of the way we have been doing it. I didn’t like that at first because it meant that sometimes I needed to tape it in place and then turn it over but knowing why helps! Maybe they have watched your videos?! Thank you! 💕
Just fab!
I usually run mine through twice, works wonders.
I've been papercrafting for almost 30 yrs (😮) and thought I knew all the tricks for diecutting. And I do, but yours are next level! I will be incorporating these. Thank you, also, for the clear explanations and the science 😊
Thank you x
I usually get my awkward dies to work better by having the die facing up too
Thank you ! I had never heard this!
Well who’d have thought, brilliant advice.❤
Thank you for sharing your crafty knowledge with us. I knew the tip but your explanation as to why we should put blade up made it make sense. I didn’t know about the types of paper could be the reason why dies didn’t cut through.❤
I sometimes have trouble getting the carsstock then out of the die in one piece. Are there tips for that aswell? These tips were great, thanks Lou!
This is very helpful. Thank you!
Great tips! Thank you!
Great advice clear and precise thank you soooo much x
Awesome tips!!
Glad you like them!
Thank you so much for the info!
GREAT tutorial... THANKS
SO very helpful, Thank You!! There are definitely certain papers that are a near to cut! Any more tips on distinguishing different types of paper for specific uses like this would be immensely helpful! I never get past the colors enough to look at the rest of the qualities !! 🧑🏼🎨😀💗
Thank you for the refresher Lou. Always helps to have a reminder.
Simple - but it works. More videos like this pls
Very helpful. Thank you!
I am currently waiting for my sidekick replacement machine, but a friend shared this with me & I am saving this to try when it arrives, because I also have die issues like so. Your video has now given me an extra reason to anxiously await my machine😅 hope it works
Thank you for sharing this🌻
Awesome video!!!!!
Great video Lou..I wasn’t aware that the paper could be the problem…other than glitter card I know is a problem sometimes. I given up on that!
Great tips!
Great tips❤
Wow fabulous ❤
Thanks for the tips!
Thanks so much Lou as a newbie I replaced my die cutting machine and plates to no avail. Bought the big shot plus and it was no better...now I know why! Even bought an intricate die metal plate! Can't wait to use my gorgeous intricate dies now! Happy New year hunni xx
Very helpful!
Thank you. 🙏
Great tips..thanks
Very helpful!
Thank you 😊🎉
Thank you so much I really really enjoyed watching you take us all through these helpful and useful tips. I’m going to put this into practice with my intricate dies. Please stay safe and well too xxxx Mags ❤❤❤❤
Thankyou for your tips. I just had a big shot for Christmas, and found your video very informative. ❤
Aaaack! This is sooo helpful, thank you! I've gotten rid of so many intricate dies because I got tired of fiddling with them, I thought it was the dies. Your tips would have helped for sure. So if I had known, (sigh...). Time to go buy a couple of intricate dies and see the magic happen! Or at least not be afraid to buy an intricate die I would like, when I see one. Any tips for using wax paper or freezer paper to release all those tiny pieces? Thank you again, so much!
Thank you so much for these great tips!
You are so welcome!
Fantastic video Lou! Really helpful, thanks for sharing.😍
Thanks Lou fantastic tips and I'll certainly be trying them x
I’m really looking forward to and enjoying your videos lately, they’re so helpful and clear, thank you!
Wonderful tips. Thank you so much! I have definitely had a problem with some dies and thought it was my machine or the die. Now I know what to do. ❤
Thank you so much for the great information! I've had so much angst with the ghosting that I've almost entirely given up on die cutting. I'll try using textured paper and see how much love I can give to my intricate dies!
Thank you so much for this video! So very helpful. I love those intricate dies but have struggled with getting clean cuts. Looking forward to trying out all these techniques! By the way, M2S’s desk vacuum is perfect vacuuming up those little bits of paper stuck on cutting plates when using intricate dies!
Excellent Lou, thank you very much, really helpful tips and tricks. ❤😘
Your tips and explanations are absolutely brilliant. I have several new intricate dies, thank you for helping me use them correctly from the beginning!
Great tips Lou. I do have some dies that I not only avoid but have put into my giveaway pile. I’m going to rescue them and give these tips a trial. Thank you so much.😊
This has been a great help, thank you. I nearly threw out a couple of intricate dies but now I can use them successfully.
I changed my Christmas card for this exact reason. Thanks for the tips!
Thanks so much! This is so helpful; it will encourage me to use my intricate die’s.
I also like using the weeding tool from Sisk that rolls over the card stock to get all the nibs out
Great explanations. TFS 💕💕
Thank you for sharing Nola from Australia
Very helpful tips. Thank you!
excellent explanation and demonstration!
Thanks Lou will definitely give all this a try
Wow, why did I not know these tips, thanks Lou.
Such a clear concise video. Thank you.
Some great tips Lou, thanks x
So true, it works every time…….
Great tips! Thank you ❤❤❤
Great tips. Thank you x
Wow! Graet to know now. Thanks.
Great tips😍💜🧚♀️😘
❤️❤️❤️
Very helpful
Thank you❤