thanks for the video. helped greatly. the only thing I did differently was, I taped the cameras with yellow tape before unscrewing them so the cameras wouldn't moved. It worked.
Thx a lot. It works nicely. The camera Module can take in place Not nessesary to demaunt it. Heat up battery 55degree. Heat up for the Display 85 degree in a Ofen. Works without any Problems. 45 mins
Lo compre y aún lo tengo,aora que ya lo eh investigado de acuerdo a las fallas que a presentado,una de las cámaras es falsa,la cámara principal dejo de enfocar tanto en video o en foto,dejo de leer el primer SIM y aora el segundo SIM tampoco lo leé,se quedó sin servicio,de la pantalla nada que decir súper resistente pero ah presentado fallas que de verdad lo dejan inútil,el celular no tiene ni 5 meses y me a sorprendido bastante y aora espero la posible devolución del dinero,considero que es un pésima opción comprar este celular
Don't need to take cameras out. Just unclip all the flat connectors. The whole camera circuit board will come off. Then we can UNCLIP the old screen flat connector from the main motherboard. To put re-clip the flat connectors, under the the camera circuit board, simply line up the circuit board where it need to be. Then press down. All the flat connectors will go back to where they are supposed to be. PS: put in the oven at 90deg for 10min. Easier to remove old screen with plastic triangle.
thanks for the video. helped greatly. the only thing I did differently was, I taped the cameras with yellow tape before unscrewing them so the cameras wouldn't moved. It worked.
Thx a lot. It works nicely. The camera Module can take in place Not nessesary to demaunt it. Heat up battery 55degree. Heat up for the Display 85 degree in a Ofen. Works without any Problems. 45 mins
the max disessembly is at 17:24 but it doesnt show screen or dusplay replacement. it is a pure half disallesmbly video.
12:00 So the broken glass just magically came off and you had a clean surface that didn't need any adhesive?
No. You should preheat the screen before removing it
@@silentrepairs And what part of your video shows that? NONE
@@Rx7man none
@@silentrepairs exactly... you don't think that might be good information to have?
My phone screen freaking out how to deal please help
Lo compre y aún lo tengo,aora que ya lo eh investigado de acuerdo a las fallas que a presentado,una de las cámaras es falsa,la cámara principal dejo de enfocar tanto en video o en foto,dejo de leer el primer SIM y aora el segundo SIM tampoco lo leé,se quedó sin servicio,de la pantalla nada que decir súper resistente pero ah presentado fallas que de verdad lo dejan inútil,el celular no tiene ni 5 meses y me a sorprendido bastante y aora espero la posible devolución del dinero,considero que es un pésima opción comprar este celular
s96pro orognal lcd available in UAE if any one need display or back speaker and batery its available please contact
Don't need to take cameras out. Just unclip all the flat connectors.
The whole camera circuit board will come off.
Then we can UNCLIP the old screen flat connector from the main motherboard.
To put re-clip the flat connectors, under the the camera circuit board, simply line up the circuit board where it need to be. Then press down. All the flat connectors will go back to where they are supposed to be.
PS: put in the oven at 90deg for 10min. Easier to remove old screen with plastic triangle.