@@e.b.u.c8404 I found that the Ethernet/IP manual covers email messaging. It starts on page 56. After some research, it seems that the most common problem is setting up the message instruction. You need the ip address of the SMTP server that will be sending your message. Otherwise it looks to be a standard MSG instruction. Pulse it and it should work. I believe that you will need to have an SMTP service running on a server on the PLC network, or a gateway on your router to reach the internet. I will see if I can get my wireless plc network to reach the internet and report on what happens. literature.rockwellautomation.com/idc/groups/literature/documents/um/enet-um006_-en-p.pdf
Thanks for this video, can 1734-aentr send message to plc using this?
Is it possible to read 1794-AENT IP Address in RSLogix 5000 via message instruction... Please suggest it possible
That's a good question. I can look into it.
@@davidturbeville7047 hello sir i need help in sending email from PLC to supervisor after i have certain faults can you please help
@@simranpreetsingh2153 What kind of PLC are you using?
@@davidturbeville7047 thankyou for your reply. I have 1769-L33ER compact logix 5370. Please let me know any solution for this.
Thankyou sir
@@e.b.u.c8404 I found that the Ethernet/IP manual covers email messaging. It starts on page 56. After some research, it seems that the most common problem is setting up the message instruction. You need the ip address of the SMTP server that will be sending your message. Otherwise it looks to be a standard MSG instruction. Pulse it and it should work. I believe that you will need to have an SMTP service running on a server on the PLC network, or a gateway on your router to reach the internet. I will see if I can get my wireless plc network to reach the internet and report on what happens.
literature.rockwellautomation.com/idc/groups/literature/documents/um/enet-um006_-en-p.pdf
great help thanks.
had forgot to put .acc on source