Build the 1:8 Scale Mercedes 300SL Gullwing - Pack 3 - Stages 11-16
Вставка
- Опубліковано 28 лип 2024
- This amazing model of the Mercedes 300SL Gullwing is available from Agora Models at:
www.agoramodels.com/
00:00 - Introduction
00:46 - Stage 11 - The Engine Fan
02:41 - Stage 12 - Oil Lines and High-Pressure Oil Line
04:17 - Stage 13 - The Gearbox and Clutch Housings
06:53 - Stage 14 - Fitting the Engine to the Chassis
08:24 - Stage 15 - The Left Chassis
14:14 - Stage 16 - The Right Chassis
Subscribe to World of Wayne at bit.ly/307c9rj
Support the channel and see the behind the scenes videos and blogs on my Patreon channel at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media, Store and Merchandise can be found at :
www.linktr.ee/worldofwayne
Video Game Soldiers by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: www.twinmusicom.org/song/295/v...
Artist: www.twinmusicom.org
#mercedes #agoramodels #gullwing - Навчання та стиль
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
I am building this model and found that assembling the frame pieces in this stage was quite difficult since the pieces did not always line up well - requiring some significant pushing and puilling to get the screw holes lined up. I found that when attaching the side frame assemblies to the main frame it was easiest to start attaching at one end and proceed through to the other - allowing the holes to be gradually forced into alignment from one screw to the next.
found this pack challenging to align all the required holes for mounting, lots of pushing and pulling required found the easiest way was to start from one end and work to the other
I’ve built 2 of these 300sls. Both have had issues with the frame lining up so I had a bit of a giggle when you had to edit the FM screws going in Wayne. It’s a gorgeous model though
Another excellent build wayne
I love your cameras and lighting setup. It just makes everything pop and look amazing. The only downside is it makes me want to build everything you're doing 😆
Lol
I see a car boot sale in your future where you sell nothing but screwdrivers.😂
Another great Video
You should take all the screw drivers and make a clock use the screw drivers to form the roman numbers on the clock face.
Lol. I think I have enough for that. We got another one in the PatreoN Alpine build last night
Greatvid
That box is almost 4 heads tall!
🤪🤪
Just as a random thought, presumably the screwdrivers all have magnetic tips. Otherwise if you dip the screw in oil I'm betting it would fall off, and retrieving it would get messy.
Are the ones supplied by manufacturers magnetic? If not, or one you have loses it magnetism how would you remagnetise it?
Just a thought regarding fitting the engine and similar jobs. Maybe get an air cushion only partly filled, rest the engine on it upside down, and then attach the chassis? That way you don't need more hands than the average person has and you can access the screws properly :)
Yep. Always magnetised
Don’t want to put you in a tough situation but who is better Agora or Pocher
You get ridiculously little for your money! O, the last stages are better!😁
👍👍👍👍👍, ⭐⭐⭐⭐⭐, 😊😊
Proč zůstávají na řemenicích otřepy?
They go face down towards engine so one be seen
Fix the stage 8.