I usually like to disassemble and fix thing like that myself, but damn this gun has some small parts. Will think twice before trying to fix it myself. Respect bro!
Depending on what you need to fix, you don't necessarily have to take everything apart. Recoil spring on mine somehow snapped and that's a really easy fix. Only had to take the slide off and then remove the recoil assembly, slide the old spring off, slide the new one on, put it back into the slide, and put the slide back on the gun. You have to take the slide off even just to adjust the hop up which is a bit annoying tho.
Me ajudou muito, eu puxei um pouco o nozzle e a mola pequena saiu aí não sabia desmontar, ai sem querer acabei puxando o seletor do full e não queria voltar mais, mais ainda bem que eu fiz não sei o que que ele voltou ao normal e consegui desmontar tudo graças ao seu vídeo, obrigado por não so me ajudar mais tambem como qualquer um que veio nesse vídeo não so arrumar um problema mais também aprender como desmontar e como funciona as coisas
Não tava voltando pra ele entrou na vala pra sair, vc tem que abaixar o pino com a mola e girar, desmontei a minha ontem fique 1 pra tentar decifrar o mecanismo, pra colocar é mais difícil pq o pino que ele mostro sai kkk
Thanks. Is this compatible with TM upgrade parts by any chance? I scored my WE 18C for an absolute steal on a website called KYAirsoft. I think it's some kind of factory direct thing because everything is absurdly cheap but also takes forever to ship. I'd like to possibly upgrade mine both cosmetically and functionally. A red slide would be pretty cool tbh. Tbh it's kinda incredible how much of it looks and disassembles like the real thing.
Ahoj, prosímtě, mohl by jsi udělat video na složení soustavy kladívka u glock 18c od WE, vůbec to nedokážu dát dohromady a jediný člověk kterého jsem našel co by udělal na toto video je člověk který neví jak se zaostří kamera.
Hi, do you know what size screw is it on the trigger/hammer assembly? like the tiny screw in the very corner of the hammer assembly. I need it really badd. Thx
@@vedatorpeta Sorry myslím tím Plynové pistole (plynovky) jsou expanzní palné zbraně. Expanzní zbraň je střelná zbraň, jejíž konstrukce vylučuje použití kulového náboje nebo náboje s hromadnou střelou.
@@frcaldoserpentini5063 jo tyhle. Přemýšlel jsem o ní, ale myslím si, že než přemůžu svojí lenost a rozloučím se s těma 3000 nebo kolik to stojí, tak budu ve věku kdy si budu moct udělat zbroják a koupím si ostrou xD. A co se týče sebeobrany, tak proti nějakým útočníkům s nabitýma pepřovýma možná, ale to už je asi lepší klasickej pepřák
@@vedatorpeta yeah that's what I did, it took a bit but I figured it out, thanks for making the video in the first place holy crap dude you saved me a whole new Glock
I could take it apart like this I think. Maybe not this much. But if I did it would never go back together. Idk how people and take it fully apart and put it back together. Respect.
I usually like to disassemble and fix thing like that myself, but damn this gun has some small parts. Will think twice before trying to fix it myself. Respect bro!
Same hahah
Depending on what you need to fix, you don't necessarily have to take everything apart. Recoil spring on mine somehow snapped and that's a really easy fix. Only had to take the slide off and then remove the recoil assembly, slide the old spring off, slide the new one on, put it back into the slide, and put the slide back on the gun. You have to take the slide off even just to adjust the hop up which is a bit annoying tho.
Me ajudou muito, eu puxei um pouco o nozzle e a mola pequena saiu aí não sabia desmontar, ai sem querer acabei puxando o seletor do full e não queria voltar mais, mais ainda bem que eu fiz não sei o que que ele voltou ao normal e consegui desmontar tudo graças ao seu vídeo, obrigado por não so me ajudar mais tambem como qualquer um que veio nesse vídeo não so arrumar um problema mais também aprender como desmontar e como funciona as coisas
Que bom que te ajudou
Não tava voltando pra ele entrou na vala pra sair, vc tem que abaixar o pino com a mola e girar, desmontei a minha ontem fique 1 pra tentar decifrar o mecanismo, pra colocar é mais difícil pq o pino que ele mostro sai kkk
Das ist das Einzige Video das mir echt weitergeholfen hat da die meisten den Schlitten nicht zerlegen, Danke an dieser Stelle ;)
My fire mode selector flew out completely.But this video fixed it.This was very helpful Thx
How do I put it back
Thanks mate best video on the net for this disassembly! 👊🏻
i really need to find out how to put it all back together please someone link a video that can help
Thanks bro, my réplica was broken and whit this video i fixed it thanks bro
Thanks. Is this compatible with TM upgrade parts by any chance? I scored my WE 18C for an absolute steal on a website called KYAirsoft. I think it's some kind of factory direct thing because everything is absurdly cheap but also takes forever to ship. I'd like to possibly upgrade mine both cosmetically and functionally. A red slide would be pretty cool tbh.
Tbh it's kinda incredible how much of it looks and disassembles like the real thing.
Legend bro just saved me $200
Ahoj, prosímtě, mohl by jsi udělat video na složení soustavy kladívka u glock 18c od WE, vůbec to nedokážu dát dohromady a jediný člověk kterého jsem našel co by udělal na toto video je člověk který neví jak se zaostří kamera.
Holy shot, i think that had no hopup, it looked super oily
It hadn't xD thank you for an advice
@@vedatorpeta The bbs were going up???
I don't think grease should be anywhere near the hop up... That's just way too much grease
@@solbadguyix yes You are tight
This was actually very helpful thank you
Thanks a lot! Much appreciated.
Is the little round things in the middle of the blowback unit after you removed the nozzle supposed to be lose?
inside nozzle there is more 4 pieces with micro screw
this is gen 3 or gen 4 sir?
Gen 4
Hi, my fire selector is stuck in semi, I cannot disamble it becouse it is stuck.. any suggestion?
I don't know, I would have to see it
The little clip in part 3:10 that holds the pin to hold the gun together I snapped it and looking where to buy it but don’t know the proper name
Hi, do you know what size screw is it on the trigger/hammer assembly? like the tiny screw in the very corner of the hammer assembly. I need it really badd. Thx
I will look for that when I will be at home
@Petr what is the part in your right hand at 6.32 I broke my clip on that part and need a replacement part
I don't know what this is called, but it's this: www.anareus.cz/cs/pro-we-glock/2488-usti-zasobniku-we-r17-18-19-WE00153.html
Yeah? Now put it back together.
A teď to nejhorší složit to 😂😂
Právě 😂 ale po pár hodinách se mi to povedlo naštěstí 😂
Uvažuješ o koupi plynovky ? Tvůj názor na plynovky atd...
@@frcaldoserpentini5063 jaký plynovky?
@@vedatorpeta Sorry myslím tím Plynové pistole (plynovky) jsou expanzní palné zbraně. Expanzní zbraň je střelná zbraň, jejíž konstrukce vylučuje použití kulového náboje nebo náboje s hromadnou střelou.
@@frcaldoserpentini5063 jo tyhle. Přemýšlel jsem o ní, ale myslím si, že než přemůžu svojí lenost a rozloučím se s těma 3000 nebo kolik to stojí, tak budu ve věku kdy si budu moct udělat zbroják a koupím si ostrou xD. A co se týče sebeobrany, tak proti nějakým útočníkům s nabitýma pepřovýma možná, ale to už je asi lepší klasickej pepřák
Shit I need assembly for the slide release
Please for the love of god tell me there's an assembly video
Sorry, i have only dissasembly. But you can put it together with it too
@@vedatorpeta yeah that's what I did, it took a bit but I figured it out, thanks for making the video in the first place holy crap dude you saved me a whole new Glock
OMG，thank you，real help to me😂
You're welcome, I'm glad from it 😂
I could take it apart like this I think. Maybe not this much. But if I did it would never go back together. Idk how people and take it fully apart and put it back together. Respect.
I had to look at my dissasembly video to put it back together 😂