[FIX] USB Flash Unable to Format and No Partition Selected CMD
Вставка
- Опубліковано 22 лис 2016
- Fixing USB Flash Drive Unable to format via CMD
Commands USED
1. DISKPART
2. LIST DISK
3. SELECT DISK #
4. list partition
5. SELECT PARTITION #
* IF no partition selected Type CLEAN and then create partition primary
6. DELETE PARTITION OVERRIDE
Virtual Disk Service error:
There is not enough usable space for this operation.
THANK YOU SO MUCH I'VE BEEN TRYING TO REPAIR MY BOTH HDs FOR DAYS BUT YOUR VIDEO FINALLY SOLVED IT
GOD BLESS YOU
No usable free extent could be found. It may be that there is insufficient
free space to create a partition at the specified size and offset. Specify
different size and offset values or don't specify either to create the
maximum sized partition. It may be that the disk is partitioned using the MBR di
sk
partitioning format and the disk contains either 4 primary partitions, (no
more partitions may be created), or 3 primary partitions and one extended
partition, (only logical drives may be created).
Same thing am also getting any solution you found
Sir when I type - "create partition primary". it shows "There is not enough usable space for this operation" and if i delete something by opening the drive it will be recover automatically after some couple of moment.....Please help 🙏
when i select create partiotion it says
No usable free extent could be found. It may be that there is insufficient
free space to create a partition at the specified size and offset. Specify
different size and offset values or don't specify either to create the
maximum sized partition. It may be that the disk is partitioned using the MBR disk
partitioning format and the disk contains either 4 primary partitions, (no
more partitions may be created), or 3 primary partitions and one extended
partition, (only logical drives may be created)
i have same problem
plz help
bloody assult hmm
bloody assult o
just run the
clean command
then
create partition primary command
then
delete override partition command
.
Prince Shehzad cant
The New Simple Volume Wizard repeatedly assigned a drive letter that does not exist. As a result, when I entered "create partition primary" at the cmd prompt, I received the following: "Diskpart encountered an error. A device that does not exist was specified." Anyone else encounter this error and able to find a solution?
omg! our amazing! I was looking for over an hour and nothing worked! you saved the day!
No usable free extent could be found. It may be that there is insufficient
free space to create a partition at the specified size and offset. Specify
different size and offset values or don't specify either to create the
maximum sized partition. It may be that the disk is partitioned using the MBR disk
partitioning format and the disk contains either 4 primary partitions, (no
more partitions may be created), or 3 primary partitions and one extended
partition, (only logical drives may be created)
Same problem
same problem
Same
Same😭😭
Same here .
Nothing else was working, but ur video did! Thanks :)
Waah bete waah, tum to bade heavy driver nikle. This worked after hrs of UA-cam videos.
thanks bro.... i have been looking for solutions and your video is a complete guide for me. One more time and thanks again :D
You my friend are a genius i have just fixed 2 sd cards and a usb thank you
THANK YOU SO MUCH THIS SAVED MY SD CARD :D
DISKPART> clean
DiskPart succeeded in cleaning the disk.
DISKPART> creat partition primary
No usable free extent could be found. It may be that there is insufficient
free space to create a partition at the specified size and offset. Specify
different size and offset values or don't specify either to create the
maximum sized partition. It may be that the disk is partitioned using the MBR disk
partitioning format and the disk contains either 4 primary partitions, (no
more partitions may be created), or 3 primary partitions and one extended
partition, (only logical drives may be created).
Same here
DISKPART> create partition primary
Virtual Disk Service error:
The operation timed out.
DiskPart has referenced an object which is not up-to-date.
Refresh the object by using the RESCAN command.
If the problem persists exit DiskPart, then restart DiskPart or restart the
computer. help
Card is dead
same problem showing this message after create primary partition
NO USABLE FREE EXTENT COULD BE FOUND . INSUFFICIENT FREE SPACE TO CREATE PARTITION. SPECIFY DIFFERENT SIZE AND OFFSET...........
PLZZZ HELP
i have same problem
i have same prblm plz hlp
Same problem bro
I m also have same problm
You nailed it. THANK YOU!!!!
I was unable to delete the partitions on my disk drive and your video was a HUGE help!! Thank you so much!!
Wow!!! It really worked...Thank you so much.
Man! Thank you so much!!... You saved my pen drive life. Really helpful video.
You're awesome ♥️
Thanks alot and keep it up
OMG! its works amazing ! thank you so much . ur my life saver
Very helpful! 32gb flash drive recovered 💕 thanks alot!!
did you still recovered ur files?
when i clean it say "DiskPart has encountered an error: A device which does not exist was specified.
See the System Event Log for more information."
have you an idea?
while i use "clean" command it shows the message "DiskPart has encountered an error: The system cannot find the file specified.
See the System Event Log for more information." and for command "lsit partition " it shows the message "there are no partition on this disk to show" help please... althogh it shows the volume into the my computer... plz do reply
you saved my life on buying a new sdcard man! Thank you, I just messed up my card by creating a partition.
When creating partition primary it shows that the operation is not supported on a non-empty removable disk suggest me what have to do?
The best tutorial ,thanks man !
after completing the "new simple volume" , and clicked "finish" in the end, it says "the system cannot find the file specified. please help me thank you
a life saver .. tnx :)
Thank you very much, It has worked for me :)
Thank you for the tutorial. Flash saved. God bless !
it still displays "DiskPart has referenced an object which is not up-to-date.
Refresh the object by using the RESCAN command.
If the problem persists exit DiskPart, then restart DiskPart or restart the
computer."
hiii i need your help ! i follow your steps but i found that there was no partition so what i have to do ?
Very useful, thanks!!!
But during format it encountered an error, from there it stops...
Is there any alternate solution...
Thanks, this helped me a lot
Here is the problem
After comand
create partition me primary
No usable free extent could be found.it may be that there is no sufficient free space to create a partition...
thanks dude!!
I'm getting error at creating primary partition, can you give ny solution for it?
Thanks alot really helped me 😊
everything worked but it does not show on the file explorer it only shows at the computer management what would be the problem?
1:11 I got this "Partition 1 is now the selected partition."
after that, I entered the command "clean" and I got the error "DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information."
what's the issue please tell me
Did you solve this? I'm also having the same problem
DISKPART> clean
DiskPart has encountered an error: Data error (cyclic redundancy check).
See the System Event Log for more information.
help me.......
hi my usb drive status is unusable and unable to create a partition, how to solve it?
You save my day👍
When I type "clean" then it says, "
DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information"
I've been trying to format my flash drive for a couple of hours but it doesn't seem to work :(
Same here.
Please help me
That time do not select partition parimary
How ?
And solutions please
thank you so much Bro.
Please help me - I got this error when i tried to clean ; DiskPart has encountered an error: The request could not be performed because of an I/O device error
same here.
when i complete these all steps.after that...it shows.format is not completed. what should i do??? plz help me sir
when i write select partition it say there no disk to select plz help me
Thanks, everything perfect. But, can I create a bigger fat 32 file? I have a 2 tb disk
you are the man. thank you bruhh
It worked...thanks for the video
it worked!! thanks!!
after i type partition primary it doesnt do anything
it shows there is no media in the device when clean, pls help
after selecting clean nothing just came out... please give me a solution for that.. :(
Thanks it works!!!!!!
Showing access denied when I tried to use cmd .
Thank you so much
thank u soo mch for the help... it worked alhamdulillah
thanks, this is working method.
Very nice Helpfull
Thank you bro you are great
thank you senpai
thanx brother it worked....
Thank you. No clue what happened to this device but it's getting repurposed!
Yoo it worked, thanks
Pls help me.. it says the format did not complete sucessfully. I do all the comands and follow it until the last
THANKS BRO / GOOD THECHNIQUE 100 / 100
NOT WORKING FOR ME MY FLASHDRIVE IS DOING SAME THING ON VIDEO BUT CANT CLEAN NOR DELETE PARTITION CANT EVEN SELECT PARTITION JUST FREEZES MY PC
no sir please reply me mha naa ya cmd SAA format nhi ho rhe Hai please reply me
when i create partition then showed the messege
No usable free extent could be found. It may be that there is insufficient
free space to create a partition at the specified size and offset. Specify
different size and offset values or don't specify either to create the
maximum sized partition. It may be that the disk is partitioned using the MB
sk
partitioning format and the disk contains either 4 primary partitions, (no
more partitions may be created), or 3 primary partitions and one extended
partition, (only logical drives may be created).
plz help me
same problem. i cannot create partition primary. have u encounter the problem?
Same
Same problem any solution?
El disco 3 es ahora el disco seleccionado.
DISKPART> list partition
Núm Partición Tipo Tamaño Desplazamiento
------------- ---------------- ------- ---------------
Partición 1 Principal 1966 MB 16 KB
DISKPART> select partition 1
La partición 1 es ahora la partición seleccionada.
DISKPART> clean
DiskPart ha encontrado un error: Acceso denegado.
Consulte el registro de eventos del sistema para obtener más información.
DISKPART>
(u can copy and paste on cmd by using richt lick)
Thanks it,s working
Please help us having same problem
Thanku ❤️❤️❤️❤️❤️ it's working
THANK YOU SO MUCH..........
Magic is in dis diskmgmt. I just went there and find usb drive and bring life in it... Thanks
No usable free extent. Error
when i type list disk it says my drive status is no media so there is no partition somebody pls help i want to create a partition pls help someone
thank you sir!
thank you so much you save me
there is no partition
Bro partition show but they said no partition selevted
Good 👍 information
Create partition command is not working please help
For my case, it doesn't even show up in cmd
thank you!
after create partition primary it says "no usable free extent could be found. -" and some other stuff
did u find any solution?
Thanks a lot
love u.!
No usable free extent could be found
Thanks!
thank u so much
Helpfull 10q!!
Thank you ......
My USB has storage of 32 gb.
But it shows 64 mb size .
And partition command shows error of size .
Error shows when I try to format USB .
Pls pls pls help me
Is it solved then how?