Thank you soooo much for sharing this info with us. Such an👍 informative video. I was stressing because my Suzy was wet under the carpet and thought it was from a hole or plug missing underneath. Even checked out the roof rail incase the problem was there. My Suzy is 12 years old now but only has 65,000km on the clock. I LOVE MY SUZY.💯
I only need to replace the seal at marker 1:40. So with nothing unbolted, is it correct to just use a pry bar to remove the axle from differential before removing the 5 bolts from differential so the the seal can be pulled out and replaced? So, it’s possible to replace the seal without taking out the differential? I also think that for 2013, grand Vitara there is a slightly different seal part number.
Great job. I have a question. I live in the U.S. and own a 2008 with the 2.7L gas engine that needs to be replaced. How hard do you think it would be to pull without a lift to work under? The 2.7L engine isn't as common outside the U.S. but I imagine it's similar to other V6 engines.
Yeah, it's easy enogh to replace engine without lifter. You can disasseble car's front and pull the engine out. I mean remove radiators, front panel and bumper. I think the biggest complexity you can meet is an exhaust pipes rotten bolts.
My rear differential has been leaking but has continued to work well. Do you think the seal is the issues? Could it be something else or should I just replace the seal?
It's important to check the corrosion on the drive shafts first. It could be useless to replace just seals. Is the seal of center shaft, (that attaches to propshaft) is dry?
hello my friend i just got old one out. i know why you seal plate is missing. while turning bolt it snapped seal plate. well i have to ask can i put differential back then put axle shafts in or do i jave to slide the left slip axle in first? i got jack stands under arm maybe that why i couldnt get axle out until i dropped differential. ..tia
Hello, usually I don't use any special tool for a work like this. And if to speak about this particular diff, second drive shaft is just clicks inside on a snap ring, and there is no problem to pull it out
![SUZUKI GRAND VITARA [Extreme OFFROAD TEST]](http://i.ytimg.com/vi/bPjgz9GgAHI/mqdefault.jpg)
![SUZUKI GRAND VITARA [Extreme OFFROAD TEST]](/img/tr.png)
Nice and perfectly made video, I thank you so much by showing this content.
You welcome!
Унас малатком е@башат атвольного😥
Thank you soooo much for sharing this info with us. Such an👍 informative video. I was stressing because my Suzy was wet under the carpet and thought it was from a hole or plug missing underneath. Even checked out the roof rail incase the problem was there. My Suzy is 12 years old now but only has 65,000km on the clock.
I LOVE MY SUZY.💯
Greetings from Brazil!
Hello !
ESPECTACULAR AMIGO ! SALUDOS DESDE CHILE MUY BUEN TRABAJO CORRECTO
Hola! Gracias!
Hoa pudiste hacer esta pega
I only need to replace the seal at marker 1:40. So with nothing unbolted, is it correct to just use a pry bar to remove the axle from differential before removing the 5 bolts from differential so the the seal can be pulled out and replaced? So, it’s possible to replace the seal without taking out the differential? I also think that for 2013, grand Vitara there is a slightly different seal part number.
Buen trabajo.
Gracias!
Muy bien!! 👍
Gracias!
Great job. I have a question. I live in the U.S. and own a 2008 with the 2.7L gas engine that needs to be replaced. How hard do you think it would be to pull without a lift to work under? The 2.7L engine isn't as common outside the U.S. but I imagine it's similar to other V6 engines.
Yeah, it's easy enogh to replace engine without lifter. You can disasseble car's front and pull the engine out. I mean remove radiators, front panel and bumper. I think the biggest complexity you can meet is an exhaust pipes rotten bolts.
thank you for the video! I did replace the same seal today but I thought it should be flush with the outside.. so you think I did it wrong?
Just let it work and observe what is gonna be. If there will be no leakage, so everything is cool
My rear differential has been leaking but has continued to work well. Do you think the seal is the issues? Could it be something else or should I just replace the seal?
It's important to check the corrosion on the drive shafts first. It could be useless to replace just seals. Is the seal of center shaft, (that attaches to propshaft) is dry?
Do you have any video replacing the differential mounts?
Not yet, but thanks for asking!
Perfect and thanks, can you pls write what is the number of the oil?
I don't remember it's number, but it is 80w90 GL5
السلام عليكم ممكن مكان بلف التبخير لسازوكي فيتارا موديل ٢٠٠٨
how i get right side axle out? slide hammer puller?
rear differential replacement
it is good if you disassemble the old differential to see the real reason why it is jammed.
Unfortunatelly, the client took the old part, i also was curious about what was broken
Si alguien necesita, tengo fotos de este diferencial por dentro.
هي زووكي مديل ..كم
وبكم سعر ها دفع رباعي ٢٠١٤
How to know if my vitaras 4x4 is working properly or not ?
If you can hear no humming or vibration. If it drives good on snow and mud, and no transmission check lamps on dashboard, then everything is fine
สนใจครับ
Muje Mumbai ke liye chaiye ,, sale kar rha hai koi
In spanish please...
hello my friend i just got old one out. i know why you seal plate is missing. while turning bolt it snapped seal plate.
well i have to ask can i put differential back then put axle shafts in or do i jave to slide the left slip axle in first? i got jack stands under arm maybe that why i couldnt get axle out until i dropped differential. ..tia
Yes, it will be more easy to slide left shaft first, while installing the diff
i got ot done. was the one you working on 2.4 automatic. 4x4?
@@adamsorell4851 Great! No, it was 2.0 4x4
i have same vehicle but the pinion seal is leaking. will yoke come.off easy or do i need a puller?
Hello, usually I don't use any special tool for a work like this. And if to speak about this particular diff, second drive shaft is just clicks inside on a snap ring, and there is no problem to pull it out