Excellent video - concise and to the point. I wish other builders could post videos this way, instead of wasting our time with 'Part 8' and 'Part 9', with the model still not completed. Well done all around! Thanks for posting.
I doubt you're still watching comments on this video, but in case you do. I'm brush painting with acrylics, do you think I'll get away with not priming the small parts like you even though I'm not using airbrushed enamel/lacquer?
My next project is going to be a motorcycle. And I’m definitely leaning towards this one. Yours came out great. Can you easily take the plastic covering on and off to display the engine. Or is it covered for eternity?
Nice. I'm currently working on the same kit. I saw however you missed three things: decal Ducati logo front fender, decal on the red stand and the two footpegs ;-) But I guess you don't have these parts anymore, after two years
Hi Normally I paint in gloss color before clear coat. For matt color, I paint gloss clear on any color and then panel liner and finally matt clear coat again.
@@plamodelstudio ohhh I see. Any tips for firdt time air brushing to paint the model? Like what are the other materials needed along with paints (eg. Paint thinner, primer etc)
Hii how much did you spend in total to assemble this.model,including the paint and paint gun, basically all the required materials (and where u get them from). I am a newbie and would like to attempt building one of the motorcycle kits from tamiya!!
Hi, I think it would take a day to assemble and take more than twice times to paint including drying. You can easily find them at a any local hobby shop or internet like Andy's Hobby. Thanks.
Hi I'm starting to build this modal but I'm at a part where I don't know where is goes hope you an help me the part is C27 hope you can point me in the right direction many thanks Andy
Excellent video - concise and to the point. I wish other builders could post videos this way, instead of wasting our time with 'Part 8' and 'Part 9', with the model still not completed. Well done all around! Thanks for posting.
I like both ways more detail for those who want to see how and all in one for those who prefer a single sitting overview.
Отличная работа. Видео сборки супер. Я тоже собираюсь приобрести себе такую модель. Удачи в дальнейших проектах.
Excellent video build. One of the best kits from Tamiya
I enjoyed watching from start up to last...i love tamiya😍😁
a tip: watch series at flixzone. Been using them for watching lots of of movies during the lockdown.
@Darren Idris Definitely, have been using Flixzone for months myself :)
She tuened out amazing great job 👍,, Keith
Thanks^^
An absolute joy to watch, I was captivated, even as an experienced modeller! Loved your use of wash to really makes those details pop!
Dam, looks freaking amazing.
I have that kit, I think I´ll make it now because i didn't know hot to use Tamiya Polish Compund, nice job btw!
So satisfying to watch.. attention to detail is impressive!
Thank you so much!
what a super crazy details.. cool.
Thanks.
beautiful vid, hope your channel grows.
Hi, what a great build. Just to check if u use the recommended paints or u have to reformulate ur own colors
What a beautiful piece.
Thanks^^
😃😃😃😃😃
music sounds like an AM radio
Nice
Nice work
I'm having the finger cot idea. That, is G E N I U S !
I doubt you're still watching comments on this video, but in case you do. I'm brush painting with acrylics, do you think I'll get away with not priming the small parts like you even though I'm not using airbrushed enamel/lacquer?
Love it 😍😍😍
My next project is going to be a motorcycle. And I’m definitely leaning towards this one. Yours came out great. Can you easily take the plastic covering on and off to display the engine. Or is it covered for eternity?
Superb build and quality photography. New sub from me 😊
Super well built !!! I just ordered it and wanted to know if there were problems with the model or something I have to look out for?
Nice.
Thanks^^
Nice. I'm currently working on the same kit. I saw however you missed three things: decal Ducati logo front fender, decal on the red stand and the two footpegs ;-) But I guess you don't have these parts anymore, after two years
I wish I could afford this kit
Good👍👍👍👍👍
vERY GOOD!
It's a high level artwork
Che. Bello
Wow just direct spray on kit without primer
so good
Hi, nice work.. Did you clear coat parts before using panel liner or just straight over the paint?. Thanks
Hi
Normally I paint in gloss color before clear coat. For matt color, I paint gloss clear on any color and then panel liner and finally matt clear coat again.
Very clean and interesting video. I've noticed you don't use any primer coat before painting. Can you please confirm?
Hi, Normally I don't use a surfacer on any parts except body parts.
Don't you prime the small parts such as engine, exhaust pipes, etc?
Great stuff, by the way!
Nop
I just painted primer on bodies and metal parts.
@@plamodelstudio Nice! And apparently the paint sticks quite well, right?
What do you use to clean the panel line accient off with?? Always been worried about using this but that looks nice
Enamel thinners
Can i have all of your paint specific to completed this 1199s?
This is my first time to built this
23:50 Hi ! What types and brands of laquer super clear gloss do you use?
Thankyou!
Do I need to buy spray paint? Or it’s optional?
Does the item comes with stock color? Thanks
Hi you need to buy tools and paints seperately.
nice work. why didnt you drill the rotor holes?
Hi, I was not that skillful at this time. This was my fisrt bike model actually.
Can you please tell me all necessary tools you used?
Hi I'm going to be building the bike you have built on the video is it ok to ask questions and get tips if it's ok many thanks Andy
Does somebody know which paint set should I buy to paint my model? All I can find are general paint sets
That looks great. What brand of paint did you use?
Hi, I use Tamiya lacquer paint.
@@plamodelstudio ...oh ok. Great, thanks very much.
Dulux paint, definitely!
@@liruizhu2146 :)
It's a shame all your beautiful attention to detail has to be covered up.
Need to try my hand building a motorcycle. never built one before.
I hope you make it someday soon.
Do I have to paimt them?
LANCE D. Yes you need to paint every single part.
@@plamodelstudio I thought it was like a gunpla
Il. Panigale
I tought tamiya come with color..just plug n play...this is ridiculous..so many color need to buy..with air spray..brush..hmm
It so good can I have it
9:09 NG. Wrong assembly
Hi! Would you sell your finished model? Thanks in advance!
一塌糊涂
Which paint can change color on exhaust pipe?
Alumium color based then clear blue, clear yellow and clear red. Thanks^^
Is the suspension working?
Nop
Purchase khaa se krna hai ye
Would you ever sell this model?
Hi did you use acrylic or enamel paint
Hi, I used lacquer paint
@@plamodelstudio ohhh I see. Any tips for firdt time air brushing to paint the model? Like what are the other materials needed along with paints (eg. Paint thinner, primer etc)
First #600-800 sand paper work on a plastic part then #1000-1200 surfacer and painting.
Is the surfacer a primer or sandpaper?
Can you get it built
T est trop fort ’mais ou sont les pistons ’moi j ai acheté un lego ,ducati et il sont la lalalalala!,,,!,,,,,,,,,
can u list all the colour that need to buy..
can you please give the buying link
Hii how much did you spend in total to assemble this.model,including the paint and paint gun, basically all the required materials (and where u get them from). I am a newbie and would like to attempt building one of the motorcycle kits from tamiya!!
Hi, I think it would take a day to assemble and take more than twice times to paint including drying. You can easily find them at a any local hobby shop or internet like Andy's Hobby. Thanks.
Donyou sell it?
Salam kena ya bang alex. Mau nanya nih beli nya di mana ya tuh motor2an nya bantu jawab ya bang makasih
Minat rakit motor juga Bang? 😁
Do you sell it?
does it provide you with the necessary tools?
Only a screw driver included. You need to buy hobby tools.
Can the wheel rotate?
Nop
@@plamodelstudio It should
I want one of this bike but already build, can u help me with that please
yes , 150$
I want one kit how can i buy it I'm from India
Suspension can work or not ?
Jin Hao Lee
It doesn’t work.
@@plamodelstudio is all the model also can’t work?
Nop
@@plamodelstudio then what model can work it?
@@leejinhao5157 if you are looking for working suspension, check TSM brand for this particular model
Nice work. Why don't you sand the lacquer with sandpaper? polishing is not enough to see a fine semolina structure...
Hi, when I made this bike, I was just beginner and not so skillful^^
Where to buy?
You can buy any internet hobby shop. It's Tamiya product.
Hi I'm starting to build this modal but I'm at a part where I don't know where is goes hope you an help me the part is C27 hope you can point me in the right direction many thanks Andy
If that wasn't such a cheap display turntable, the bike would look real!